Cold circular saws - half-automatic - Saw blade dia. 0-350mm for sale
Your detected location:
United Kingdom
(Edit)
saw blade diameter 275 mm
cutting diameter 90 mm
capacity 45 degrees: flat 150 x 100 mm
mitter cutting - all-position 45 °
Benrtq088a
cutting speed 16/32 m/min
saw blade diameter 315 mm
cutting diameter 120 mm
capacity 90 degrees: flat 180 x 70 mm
turning speeds 17,5 / 35 U/min
voltage 380 V
total power requirement 1,8 / 2,6 kW
weight 500 kg
range L-W-H 862 x 1085 x 1800 mm
Buaqfwlei7
Furnishing:
- pneumatic saw blade feed
- coolant device
- Machine and frame
- saw blade
bore capacity in steel (diameter) 100 mm
arm length 2700 mm
workpiece height max. 1830 mm
spindle diameter 130 mm
spindle stroke 600 mm
turning speeds 10-1545 U/min
spindle drive 12 kW
Bv3keougxd
column diameter 600 mm
total power requirement kW
weight of the machine ca. 13 t
dimensions of the machine ca. m
Sawblade dia. 350 mm Sawblade speed 3400 rpm Capacity 180 x 70 mm (90 deg) Capacity round 120 mm Pneumatic vices
7dfmksu
Cutting range: Ø 100 mm or 145 x 85 mm
Saw blade Ø: 315 mm
drive type: el./mech.
Remark:
underframe,
coolant device
O0sibyum
drive: 0,75 / 1,3 kW
weight: 200 kg
Cold circular saw, metal circular saw, metal miter saw
-Saw blade diameter: max. 250 mm
22klw8hz
-Material diameter: max. 80 mm
-Burr-free cut
-Counter
-Water cooling
-Dimensions: 1200/800/H1450 mm
-Weight: 534 kg
saw blade diameter 350 mm
cutting diameter 90 mm
Beombasx0v
stroke 160 mm
mitter cutting - all-position ± 45 °
turning speed range U/min
voltage 380 V
total power requirement kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,80 x 0,85 x 1,35 m
- S/N: 4296
- pneumatic feed
- coolant equipment
sawing machine for non-ferrous metals
transmission range up to Ø60 mm respectively 70 x 70 mm
cut-off length up to 250 mm
engine power: 3 kW
rotation speed: 180 - 4800 rpm
sawing blade up to 250 mm
pneumatic voltage
flow cooler
control system renewed: 2011
Ysiuaw
ESTA oilmistseperator type AS 600, year of construction: 2006
throat 3000 mm
dia. of quill 110 mm
workpiece height max. 1300 mm
feed 0,05-2,5 mm/U
surface area 3000x1100 mm
Mv97ok
spindle turning speed range 14-1000 U/min
1200 x 1100 x 550
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
capacity 90 degrees: round 350 mm
capacity 90 degrees: square 330 mm
500 x 310
band speed 15 - 100 m/min
Bh2yzsm9nj
table height 844 mm
dimensions of saw-band 4250 x 34 x 1,1 mm
total power requirement 2,2 kW
weight of the machine ca. 1,2 t
dimensions of the machine ca. 1,4 x 2,4 x 1,935 m
MACC 350 S in mint condition.
Bwizmw2ikz
Catalog No. : 4197
Type: ADIGE CM 601
Producer: BLM GROUP
Made in: 2014
Characteristic:
Control system:
Siemens simatic S 1200
Operating hours: 4575 h
Bsxljqiq0g
Max. diameter of the cut material:
0-102 mm
Main motor power: 5.5 kW
Max. length of cutting: 5-400 mm
Processed material:
Brass steel aluminium
Blade diameter: 365 mm
Parts diameter: 0 - 102 mm
Lenght cutting stroke: 5-400 mm
Accessories:
Baking for different diameters
Dust Extraction
Semi-automatic metal saw FABRIS type SA 300
machine # 537, year of construction 2010
technical data:
Saw blade diameter 300 mm
drive power 1,1 / 1,5 kW
with
- CE mark
- cooling device
- aut. vice
- aut. saw blade feed
Bwkzigkk
- several saw blades
used, in good condition
neu
1
6204
Italien
2380
300 x (2)2,5 x 32 mm
33 - 66 U/Min
45 °
45 °
rund 102 mm, Quadratprofi
rund 90 mm, Quadratprofil
rund 80 mm, Quadratprofil
1,5/2 kW
500 mm
1050 mm
990 mm
135 kg
Piyvt
vice with quick clamping device and additional clapming strip for reduced cuttinag burr
reduction gear and clutch to save the gear and sawing blades
coolant equiptment
sawing blade protection
material stop
users manual in GERMAN
(sawing blade not included)
OPTIONS:
sawing balde...
saw blade diameter 900 mm
cutting range 1250 x 350 mm
Roller conveyor length 5000/700 mm
Buaqprb778
Roller conveyor width 800/500 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
capacity 90 degrees: round 255 mm
capacity 90 degrees: square 240 mm
300 x 180
saw band length 2.765 x 27 x 0,9 mm mm
table height 950 mm
band speed 18 - 110 m/min
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,42 t
Doijbfu88
Capacities:
Saw blade diameter, max mm 275
Cutting diameter mm 75
Nknflrmz
Max rectangular mm 120 x 75
Weight of the machine kg 250
Excl. roller conveyor
Pneumatic feed and clamping
Machine in good condition. Under power and ready for inspection.
OFFER 18268
Technical data:
- Saw blade diameter up to 350 mm
- Automatic saw blade feed via pneumatic cylinder
Bvdgnle0si
- largest opening width of the pneumatic vice 190 mm
- Cutting range with saw blade diameter 350 mm
- at 90° round 115 mm
- flat up to 180 x 95 mm
- at 45° around 110 mm
- flat 125 x 85 mm
- mitre adjustable - Li up to 30°
- Re up to 45°
- saw blade speeds 15 + 30 + 45 + 90 1/min
- drive 400 V / 2,7 kW
- coolant device
- infeed - roller table 3000 mm
- discharge - r...
Metal circular saw Fabr. MEP Type Tiger 352
H3l007jua
Machine # MEP060601029 27 Year of construction 2006
Technical data:
Saw blade diameter 350 mm
saw blade dimension 350 x 2,5 / 3, 0x 32 mm
vice opening dimension 190 mm
Saw blade speeds 15 / 30 / 45 / 90 rpm.
Cutting range 90° round 115 mm
90° square 95 mm
90° flat 180 x 95 mm
45° round 110 mm
45° square 95 mm
45° flat 125 x 95 mm
60° round 90 mm
60° square 90 mm
60° flat 90 x 90 mm
Drive power 1,8 / 2,5 kW
weight approx. 375 kg
with
- cooling...
neu
1
6212
Italien
5840
110.96
370 x 3,0 X 40 mm
15 - 30 U/Min
60 °
45 °
rund 120 mm, Quadratprofi
rund 120 mm, Quadratprofi
rund 105 mm, Quadratprofi
1,5/2,2 kW
810 mm
1020 mm
1850 mm
390 kg
circular saw to also cut high strength steels
linear guide of sawinghead with manual feed by hand lever
manual machine vice, moveable sideways with additional clamping strip for reduced cutting burr
coolant equipment
sawing blade protection
material stop
extractable chip drawe...
saw blade diameter 400 mm
cutting diameter 135 mm
stroke 140 mm
total power requirement kW
weight of the machine ca. t
Buaqouonb2
dimensions of the machine ca. m
capacity 90 degrees: round 510 mm
capacity 90 degrees: square 450 mm
650x450
band speed 15 - 100 m/min
table height 844 mm
dimensions of saw-band 5320 x 34 x 1,1 mm
Benv3avpuk
total power requirement 3,0 kW
weight of the machine ca. 2,1 t
dimensions of the machine ca. 1,9 x 2,87 x 1,3 m
Semi Automatic Circularsaw Imet Serio 350 SHE
Saw blade diameter: 350 mm
Saw capacity: 130 mm round / 100 mm square
Saw mitre: 45º left/right
Saw speed: 9 / 18 / 36 / 74 Rpm
Clamp opening: 180 mm max.
Featured with:
- Pneumatic clamp
- Pneumatic sawfeed
N3k2z
Country of origin: Italy
Machine weight: 450 kg
Machine LxWxH: 1.000 x 810 x 2.000 mm
Very suitable for steel, stainless steel, copper and brass
Semi-automatic circular sawing machine
Make KASTO Type:V350 U Year 1998
with mitre cut, roller conveyor and stop
Bmguwuyqas
Saw blade dm.350mm
Pneumatic vice and saw feed
Stepless.
Machine little used in good condition.
Cold circular saw
Manufacturer Metallkraft
Semi-automatic
Pneumatic
Bidgdqf07s
Power 1,8 KW
Speed 33 -66 rpm
Clamping width 160 mm
Approx 50 pcs.
380 V 16 A
Length 80 cm
Width 100 cm
Height 180 cm
Weight 270 Kg
Minimum quantity lubrication system WRT
Saw blade 315x2,5x32 T80120Z HSS DM05
neu
1
6203
Italien
Bymnfyzw
3675
350 x (2)2,5 x 32 mm
30 - 60 U/Min
45 °
45 °
rund 125 mm, Quadratprofi
rund 105 mm, Quadratprofi
rund 70 mm, Quadratprofil
1,8/2,5 kW
600 mm
1220 mm
1060 mm
206 kg
very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²)
vice with quick clamping device and additional clapming strip for reduced cuttinag burr
reduction gear and clutch to save the gear and sawing blades
coolant equiptment
sa...
saw blade diameter 450 mm
cutting diameter 150 mm
stroke 1300 mm
Control
cutting range 140x140 mm
Grkngoxwe
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
MEP vertical circular saw Tiger 352 SX EVO
Electro-pneumatic semi-automatic vertical circular saw
with microprocessor control, for mitre cuts from
60° left to 45° right, to be executed on steel, with
HSS saw blades.
Turntable with additional central axis.
Mode of operation: At the start of the cycle: Vise
closes and motor starts up, saw head lowers for
the cut, motor switches off, saw head rises,
vice opens.
Some features:
- Stroke of the saw bow directly programmable from the control pa...
Saw blade diameter 315 mm
Saw blade speeds 33/66 rpm
cutting capacity:
0° (round) Solid material 70 mm
0° (round) Pipe 100 mm
0° (square) tube 90 x 90 mm
0° (rectangular) Tube 135 x 80 mm
-45° (round) Solid material 70 mm
Be8sebve7d
-45° (round) Pipe 100 mm
-45° (square) tube 90 x 90 mm
-45° (rectangular) Tube 100 x 80 mm
+45° (round) Solid material 70 mm
+45° (round) Pipe 100 mm
+45° (square) Tube 90 x 90 mm
+45° (rectangular) Tube 100 x 80 mm
+60° (round) Solid material 70 mm
+60° (round) Pipe...
OFFER 21149
Technical data:
- Saw feed via hand lever
- saw blade diameter 315 mm
- largest opening width of vice approx. 175 mm
- cutting range approx. at 90° around 110 mm
- flat up to 150 x 90 mm
- cutting range Li + Re at 45° approx. 108 mm
- flat up to 120 x 80 mm
- Cutting range Li at 60° approx. 100 mm
- flat up to 88 x 88 mm
- Cutting speed 37 + 74 rpm
Bufyamaoac
- drive 400 V / 2,2 / 3,0 kW
- Coolant device
- Feed - roller table 1500 mm
- discharge - roller table 2000 mm
- space re...
High performance saw AMADA CMB 100
Heavy duty feeding system Schubert TRB-SAV
Year of manufacture 2009
AMADA saw with thin blade technology for material up to 6 m length
cutting range: up to 100 mm
Feed rate blade: 200-1500 mm/min.
residual length min 95 mm
saw blades 460 x 50 x 2,7 mm
Cutting speed 45-145 m/min.
Gwa9zo
Schubert heavy duty feeding system
for automatic separation of round and square material from 26-100 (140) mm up to 6 mtr. length
Transport roller table TRB 65-6
neu
ca. 8 Wochen ab Auftragse
Italien
18225
340.81
370 x 3,0 X 40 mm
15 - 30 U/Min
60 °
45 °
rund 120 mm, Quadratprofi
rund 120 mm, Quadratprofi
rund 105 mm, Quadratprofi
1,5/2,2 kW
Bww333gtvz
1900 mm
1450 mm
2100 mm
710 kg
Circular saw to also cut high strength steels for cuts from 0° to 45° right (only semi-automatic cycle) and from 0° to 45° left
linear guide of sawinghead with elektro pneumatic feed, with hydr. feed adjustment
pneumatic vice on adjustable guides,...
a used well-preserved semi-automatic cold saw EISELE with pneumatic material tension and automatic feed
Saw blade diameter 350 mm
Speed 17/34U/min
Cutting range 90 ° round/square/rectangle 120 / 100 x 100/170x100mm
Section 45° right round/square/rectangle 120 / 95 x 95/95x100mm
Lcnlp
Section 30° right round/square/rectangle 100 / 85 x 85/65x100mm
Coolant system
Feed roller track 2000 mm
Length stop 1000 mm
Semi automatic metal circular saw Fabr. ECHO type VMS II PV / PROD (only 90 °)
Masch.# 10106, built in 1979
Technical data:
Saegeblattdrm. 275 mm
160 x 80 mm flat section
W9hrqhbb
flat 45° 120 x 80 mm
Angle iron 90 ° to 45 ° 80 x 80 mm
Iron 90 ° NP 16
Cylindrical 45° NP 12
90 + 45 ° 100 mm tubes
Double tee 90 ° 160 x 74 mm
Double tee 45 ° 120 x 58 mm
Solid material 100 / 75 mm
2 blade speed 40 / 80 RPM.
Power 1.4 / 1.9 kW
External dimensions approx. 800 x 800 x 1600 mm
Attention: no miter cutti...
disk of circular saw-Ø: 315 mm
cutting area at 90° round: 90 mm
cutting area at 90° square: 100 x 60 mm
cutting speed: 17/34 m/min
engine: 380 V, 1,8/2,6 kW
Cxofdw7
space needed: 1200 x 860 x 1850 mm
weight: 720 kg
EISELE cold circular saw
Type VMS III PV- 038 with pneumatic material clamping and automatic feed
400V 50 Hz
Technical data
Saw blade diameter 350 mm
Cutting range 90
Round 120 mm
Rectangle 17x100 mm
Cutting range 45
Round 120 mm
Rectangle 95x100 mm
Speed17,5/35 rpm
Coolant device
Feed gripper
Saw dimensions LxWxH
800x800x1850 mm
Dimensions feed gripper LxWxH
1150x900x980 mm
Br0jo2xpkg
Weight approx. 750 kg
gebr. Underfloor ALU - miter saw make PRESSTA EISELE
Ccoftsy8
Model 300 S Emmegi. No.: 0040278 year of manufacture 2000
Saw blade ø 300 mm
Blade rotation speed 2800 RPM
Cutting area:
90 ° 160 x 20 or 100 x 80 mm
45 ° 100 x 40 mm
Motor 380 V 1,5 kW
External dimensions:
Width 600 mm
Depth 750 mm
Height 1350 mm
Weight approx. 85 kg
With:
Pneum.. Material tension
rollable frame
neu
2018
1
6147
Italien
9650
183.35
370 x 3,0 X 40 mm
15 - 30 U/Min
60 °
45 °
rund 120 mm, Quadratprofi
rund 120 mm, Quadratprofi
rund 105 mm, Quadratprofi
1,5/2,2 kW
750 mm
950 mm
2050 mm
443 kg
Semiautomatic circular saw to also cut high strength steels
with Electropneumatic functioning, hydraulic control down-feed speed of the head
linear guide of sawinghead mit hydraulic controlled feed
pneumatic machine vice, movable sideways with additional clapming strip f...
Peculiarities of this machine:
mechanical-pneumatic vice
hydropneumatic heading adjustable (see display)
sawing process and vice opening either manually or automatically
The saw head automatically returns to its basic position once the saw depth has been reached.
Sawing capacities:
90° degree cut
diameter max. 130 mm
square tube 100 x 100 mm
Pnpfxuh0
mitre cutting steplessly variable
right and left mitre, if necessary with one tension
Machine was rarely used.
Halbaut. Metal circular saw Fabr. EISELE VMS type II S PV 420
Masch.# 00303 built in 1981
Technical data:
maximum blade diameter 315 mm
2 blade speed 40 / 80 RPM.
Cutting capacity 90 ° 170 x 80 / 82 x 82 / 110 mm round
Xg3x3ynud
45° 120 x 80 / 82 x 82 / 110 mm round
Power 1.4 / 1.9 kW
Dimensions L x W x H 1150 x 1050 x 2050 mm
Weight approx. 340 kg
with
-stepless, pneumatic blade feed
-pneumatic Vice
-Cooling device
-Base
used from operating resolution
in very good condition
High performance metal circular sawing machineQuote number: 19277Factory: RURACKType: VS 300 HA Machine no: 3552Baujahr:1996Technical data: -Semi-automatic with hydro-pneumatic feed workpiece clamping in pneumatic - Machine vice saw blade diameter 300mm-Cutting speed N 40 - 80U/min-Cutting range at 90° - round 95mm - Rectangle 125 x 90mm- in mitre re. left at 45° - round 95mm - rectangle 95 x 85mm - drive 400 V / 1,2 / 1,6kW-pneumatic connection 6 - 8bar-coolant unit space requirement approx. ...
Semi-automatic cold circular saw (metal circular saw)
Cutting capacity 0° (round) 95 mm
Cutting capacity 45° (round) 90 mm
reduced set-up times due to the quick-action vice with pneumatic clamping
automatic sawing process with infinitely adjustable feed rate
two saw blade speeds for optimum cutting results with different materials
mitre cuts up to ± 45
Saw stroke adjustable, thus shortening cycle times when sawing smaller diameters
gear drive with splash lubrication
Bvbndev9
Underframe and coola...
Cold circular saw Kaltenbach SKL 350, with reserve saw blades, angle adjustment from 0°-180°, saw blade drives up pneumatically, 2 roller conveyors a 3m and a 4.5m with measuring device and pneumatic connection
Bfhhppoady
1. SCOPE OF SERVICES
- Behringer Eisele VA-0-250-NC circular saw (year: 2002)
- Feed rollers
- Coolant tank
2. TECHNICAL DATA
Sawing range: 90 °
Saw blade diameter: 25 cm
Drill hole: 40 mm
cutting range: 10-75 mm
cut-off length: 5-900 mm
Speed: 10-14-20-28 rpm
cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s
feed speeds: 0-40 mm/sec
NC axis: Yes
Dimensions: 190 x 127 x 190
Weight: 1300 kg
No responsibility is taken for the correctness, completeness and topicality of the information....
Cutting capacity 90 ° round 105 mm
square 85 mm
flat rectangular 120 x 70 mm
Cutting capacity 45 ° round 90 mm
square 89 mm
Ne0ilopb
Flat rectangle 90 x 60 mm
- curcular saw -second hand-
- EISELE - VMS III - S-PV
---
- saw blade diameter 350mm
Bdhhhhjxc8
- Geschwindigkeit 17/34 rpm
- pneumatic vice
- pneumatic drop down
- MINIMUM LUBRICATION
Pertici circular saw
Bmudqj8a0d
saw blad Diameter 350 mm
Nyggzhjb
Follow technical data
Vr0qp2
