Other machines

AMIS Holzhacker-Holzhäcksler H880/250

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * P-Line (fully hydraulic rotary quick coupler with OQ40-5 mount) * 300mm rubber track * 1,720mm arm * complete piping Lsdpexazvdofx Af Noai * Overload warning system * Engine power 18.8 kW * Operating weight 4,040 kg * 2 x digging buckets (300mm and 500mm) and 1 x hydraulic ditch cleaning bucket

Condition: used, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low-bed trailer, low-loader trailer, low-bed trailer for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Ledpfxet N Ante Af Neai Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Front axle load: 8,000 kg Middle axle load: 8,000 kg Rear axle load: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with frame removed and tarpaulin pushed forward) - Spare wheel mounted on the front wall - Separate lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – extendable in multiple stages - Very robust lashing points on the outer frame and in the centre of the vehicle - ALU loading ramps: length 268 cm, width 410 mm, height 130 mm (surcharge 2,000 EUR net) This vehicle was purchased by us as a new vehicle, is first-hand, is registered and currently in use by us. Very good condition.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Laodevmz N Uepfx Af Nji Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Lasdpfjtuyr Isx Af Nji Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Lajdpfxsv Evx Us Af Nji Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: new, Year of construction: 2025, operating hours: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Rotation range: 360°, with a rotation speed of 13 rpm kink boom joystick control adjustable chassis Technical data: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Buy diesel engine with 9.5 HP/7 KW Cooling: Hydraulic oil cooler Max. torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: Up to 150 kg Fuel tank capacity: 5.5 litres Electric starter: 12 volts Maximum climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Crawler chassis dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 litres (HLP46) Pump type: gear pump Slewing radius: 360° Slewing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Breaking force on the bucket: approx. 650 kg Hydraulic output: 30 litres per minute Digging depth: 1650 mm Overload height: 2150 mm Reach on the ground: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lsdpfevz Ih Tex Af Nsai Lifting capacity: 600 kg Product/shipping weight: 940 kg Special features: Excavator arm with articulation (120°), hydraulically adjustable chassis from 90 cm - 110 cm, additional hydraulic connection on the excavator arm for hydraulic accessories

Condition: used, mileage: 1,001 km, power: 46 kW (62.54 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 13,500 kg, empty load weight: 11,800 kg, maximum load weight: 1,700 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/1979, Year of construction: 1979, operating hours: 13,655 h, front tire size: 9.00-20, driver cabin: other, wheelbase: 2,500 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, Vehicle location: Bovenden, working lights, twin tires Wheelbase: 2500 mm Approx. 13655 operating hours! Air-cooled Deutz diesel engine type F 4 L 912! High-performance double pump with total output control! Steering axle with automatic oscillation lock! Hydraulic drive by variable speed drive motor with creep speed control! Loading length approx. 7400mm! Loading width approx. 2500mm! Loading height approx. 3000mm! Ljdpfjvhh Nqjx Af Neai Bucket available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor Laodpot Hg Huofx Af Nji With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: ready for operation (used), Year of construction: 2007, For sale: Zenz Wimmer band sawmill, in good condition, ready for work. Cutting length: 14.5 m, engine: 22 kW. Laedpfjxc Tzwox Af Nji

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Worked hours: 11.445 Engine: Cummins QSB 6.7 Boom: K15 configuration, Safety check valves on boom and stick cylinders Laedot Dlwyepfx Af Noi Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Undercarriage: Crawler hydraulic tele T41/380, triple shoes Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work