HAWA milling debarker

hava hava

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Gujdpfju Damdox Anloc

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: Guodedfgg Iopfx Anloc A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side 5+5 motors Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Kit of Diamond tools for T&G profile +infeed belt conveyor with lateral guide Godpfx Aexwnhbjnlouc Installed, visible at our factory in working condition

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 50 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Z stroke : 150 [mm] - X stroke : 225 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1.1 [kW] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 5 - X/Y stroke : 97/133 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1063/2033 [mm] - Machine height : 1666 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : CINCOM 18iTB - Coolant tank - Bar loader : IEMCA SMART 320 Gsdpfx Ajuha Umjnleuc

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Two working fields with dimensions of 620x110cm. Godpfx Anoudy A Nsljuc

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW Guodpodlhdbofx Anljc -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Gjdpfx Ansx Emf Delsuc Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.

Condition: new, Year of construction: 2025, New Knife grinder with tilting magnet mm 1200 long, carriage speed steplessly variable, automatic downfeed of the grinding wheel, adjustable grinding length, PLC, colour touch screen display, coolant system Gusdjwamkvspfx Anlec

Condition: used, mileage: 835,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. Gsdpfx Anor Uzgcoleuc The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Guedjwlaxkjpfx Anlec Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995