Pellet press Andritz Paladin 600B

Andritz Paladin 600B

Year of construction: 2023, condition: as good as new (ex-display), Technical data:- Load capacity: 15000 kg- Own weight: 960kg- Insertable workpiece diameter: approx. 50 - 3200 mm- Roll diameter: 250mm- Roll width 240mm - Rotation speed approx. 100-2,000 mm/min- Two-pedal foot switch- Potentiometer for stepless speed control Hnodped Iuqaefx Aadsh

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 2200 x 1000 x 400mm Hjdpod Dy S Dsfx Aadjnh ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Hnjdpjvdrtxefx Aadoh Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Hnedevpvp Ijpfx Aadeh

Condition: new, Year of construction: 2026, Drum chipper series ATH Hedpfeuz Hmxjx Aadjnh S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Year of construction: 2007, functionality: fully functional, Wood Pellet Production Plant 10 t/h On behalf of AEK Pellets AG, Switzerland, we are selling a currently operational, fully functional production plant for the manufacture of wood pellets with a throughput of 10 t/h, expandable up to a maximum of 12 t/h. Overview - 3-press system including machines by CPM, Salmatec, Knoblinger, Friedli - Scope of supply: from dry wood shavings silo (incl. discharge screws) to pellet screen - Including control system and wiring Condition - Years of construction: 2003 / 2006 / 2007 - Plant in ongoing operation; inspections possible by prior arrangement - Annual maintenance by manufacturer - Various essential spare parts available - Manufacturer’s drawings available Main Components (excerpt) - Silo discharge screws (IPM, Gottwald) - Conveyor technology incl. belt bucket elevators, chain and connecting conveyors - Intermediate bunker for dry shavings (48 m³) - 2 pcs. starch silos with micro dosing (26 m³) - Dry chip mill Champion CHAMP 30X54, 250 kW, with magnetic separator, foreign body extractor, and Scheuch filter - Salmatec 1900LS conditioner with moisture measurement and steam/water regulation - Maturation silos and dosing systems - Pellet presses 2× Salmatec Maxima 840 and 1× CPM 7930-4 - Belt cooler, AVITEC pellet screen (3 fractions) with pellet cracker - Central dust extraction with cyclone, bag filter (181 m²), and fan (45 kW) - Associated steel structures and access platforms Availability - Dismantling available from July 20, 2026, with later dates upon request - Commercial Terms - Sale ex site, as is, with all warranties and guarantees excluded - Buyer must ensure CE compliance of the entire plant at the new location - Dismantling and transport to be carried out by the buyer; risk and liability transfer upon start of dismantling - Lifting equipment and export documents provided by the seller - Registration of personnel and proof of insurance to be arranged by the buyer - Components not explicitly mentioned as well as external media (power, steam, water, compressed air) not included - Pellets have so far been produced according to ENplus A1; no guaranteed property - Liability for consequential damages excluded; technical details without guarantee Hnjdeydr Akspfx Aadeh Contact Commercial / Inspection: Marcel Moser, AEK Pellets AG Technical: Dieter Friedli, Friedli AG Engineering und Anlagenbau Friedli AG Engineering und Anlagenbau has over 25 years of industry experience and has been operating its own wood pellet production plant for more than 10 years. We are pleased to support you with consultancy, feasibility studies, and technical and commercial evaluations.

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen Hodpfxoxv Dkcj Aadonh - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator Hodpfx Aaswdawqodenh The machine has no door It worked on a cake

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: Hnedpfx Ajn Hqmmjadoh - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved. Hnjdpjxrtt Eefx Aadoh