For the briquetting of aluminium chips
Option tub + 4.780 € net
Option briquette transport as on picture 1 + 690 € net
Option oil cooler + 3.995 € net
Throughput capacity: 30 - 90 kg/h (depending on material),
Briquette diameter: Ø 50 mm,
motor: 5,5 KW,
400 Volt / 50 Hz / 3-phase,
pump: 40 litres,
Briquette length max.: 50 mm,
Briquette length opt.: 40 mm,
diameter silo: 1.000 mm,
Silo: 0,5 m³
oil tank 110 litre.
Dimensions: 1750x1130x1100 mm lxwxh
Weight: 680 kg.
Briquetting press Höcker Polytechnik for metals, type BrikStar MD 15/55, constructed 2010
Manufacturer: Höcker Polytechnik
Type: BrikStar MD 15/55
Year of construction: 08/2010
Drive power: 15 kW
Throughput: approx. 350 kg/h
Briquet cross section: 55 mm
Weight: 3200 kg
the specific pressing pressure on the material has the following approx. value:
- 317 megapascals
- 3170 bar
- 31.70 kN/cm³
- 3232 kg/cm³
All technical data refer to specifications of produce...
The briquetting press ready for immediate use
The briquetting press is designed for pressing sawdust and wood chips of all kinds into briquettes. The design of the briquetting press is compact, handy and is produced in Germany. The large oil tank ensures that the oil cannot overheat during continuous operation. The briquette press is ready for immediate use and does not have to be installed first - just plug it in and off you go. Download brochure Show all briquetting pre...
Styropor compressor | Press for Styropor Styropopactor MINI
Item number: 42005
Output:. With fish crates of 25 KG/M3 material volume weight EPS measured: 35-45 kg/h
Performance measured in fish crates with lid
(650 grams per piece and about 800x400x220mm): 50-60 boxes/piece
Wet boxes: YES
Stainless steel version: YES
40'HC container: YES
Mobile version (with wheels): YES
density (after compression): 250-350 kg/m³
Connection (special connection possible): 4.0kW 3-phase 400V / 50Hz 480V / 60Hz
CF NIELSEN BPU 3200 briquetting unit with BS 350 briquette saw in very good condition (with appr. 2000 working hours) main features:
BPU 3200 briquetting unit
Self contained unit including frame, briquetting press, buffer silo 0,4 [m3], dosing screw and control panel.
22 kW main motor 1400 RPM 3x400 V 50 Hz (1750 RPM 3x480 V 60 Hz USA/Canada)
Feeding unit, which pre-compresses the raw material and places it in front of the piston in order to give each piston stroke an optimum output at a st...
Complete plant consisting of:
RUF briquetting press for rectangular briquettes
+ mütek wood shredder type MRZ 830
(optionally available with smaller and larger shredders)
+ conveyor belt
+ overband magnet (for separation of nails)
List price net: 99.795 € plus VAT.
Technical data briquetting press:
Throughput capacity: up to approx. 430 kg/h*.
*depending on the bulk density of your starting material
*based on a bulk density of 200 kg per cubic meter
Detailed information after successful test w...
For sale is an Adelmann briquetting press type BP650/2
year of construction 2007
operating hours only 1900
incl. tempering unit, control cabinet, cooling section, cut to length device
Immediately ready for use.
Many different nozzles as well as press plungers available.
With questions you can call gladly.
7,5 kW - 11 kW
Machine number: AMIS briquetting presses type ZBP 50, 60 and 70
AT A GLANCE:Variable tank dimensions (on customer request)Left or right-hand versionHydraulics with separate oil tankAll series can also be equipped as "DUO" versions
Wood chips, sawdust, sawdust, etc. accumulate in all craft and industrial enterprises of the woodworking industry. Enormous storage and transport costs are claimed daily. The briquetting presses offer an ideal solution for this, as br...
Bronnebeg Comprima Briquetting Press was originaly developed for briquettting saw dust and wood chips but appeared also qualified for briquetting alum turnings.
Briquette size: 200 x 120 x var.mm.
production: 400-450 briquets per hour.
Weima TH 1000 Z Briquetting press with oil cooler and funnel, constructed in 11/2009, drive power 15+7,5 kW, 780 operating hours
Manufacturer Weima Maschinenbau
Type TH 1000 Z
Year of construction 11/2009
Operating hours Ca. 780
Control Siemens Simatic S7-200
Drive power 15+7,5 kW
Output Up to 120 kg/h, depending on material
Briquette size 100 x 60 mm
Operating instructions in French language
The briquetting press ZBP 40 was developed especially for small and medium-sized companies and convinces with a sensational price-performance ratio.
The construction is compact and handy. With a width of less than one meter, the press fits through almost any door.
The briquetting press is suitable for the briquetting of wood shavings, sawdust, wood dust, wood chips, paper and polystyrene.
Further features of the ZBP 40Optionally available hopper attachment for manual feed...
EPS Compactor C200 by Bartontech Poland
New machine, produced by us!
Price: 23 000 euro’s (netto price)
Press polystyrene EPS-C200 compacts EPS waste at a ratio of 50: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment.
- Power consu...
* Plant currently in pre-run
List price basic machine: 44.995 € net
Very robust machine with high pressing force and permanent agitator
- is also suitable to produce already a saleable briquette quality *depending on the material. The large dimensioned pressing cylinder and the 80 mm briquette make this possible.
Our best selling briquetting press series
+ Tried and tested, simple technology, for extremely low susceptibility to faults
+ 25 years of experience, further development and know-how
For the industrial production of rectangular briquettes
The ZBP 500 briquetting pressable materials into highly compressed briquettes. The briquettes can be stored well and transported easily due to the stackability. In the pressing chamber of the hydraulic pressing unit the briquettes are formed by means of a pressure cylinder. This allows the production of up to nine birketts per minute with a pressing force of 1,000 -1700 kg/cm².
Standard equipment:Safety limit switch...
Also different models avaliable !
1. Briquette Diameter: Ø 120mm
2. Capacity : 1800 – 2200 kg / hour (Iron & Steel)
3. Preliminary Compression Ram Thrust: 15 tons
4. Main Compression Cylinder Thrust: 400 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 75 kW
8. Machine Dimensions (Width x Length x Height): 3200mm x 4200mm x 3500mm
9. Machine Weight: 13.000 kg
10. Screw drive feeders will fill the compression chamber automatically and built-in vib...
EPS Compactor C50
Press polystyrene EPS-C50 compacts EPS waste at a ratio of 40: 1. Ironing polystyrene by using offered compactors EPS reduces the cost and the space occupied by the EPS waste. EPS presses are very easy to use and safe, can be operated by one person. In addition, the compression of waste polystyrene foam and its re-use can help us to care about the environment.
• Total power consumption: 6,2 kW
• Compactor size: 2000 x 600 x 1700mm
Hydraulic briquetting press for rectangular briquettes
Type R.U.F. R2 - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³.
+ 24h operation possible
+ Low maintenance costs
+ Compact structure
+ High energy efficiency thanks to innovative hydraulics
+ 25 years of experience
* depending on the bulk weight of your raw material
* based on a bulk weight of 200 kg per cubic meter
Detailed information after...
Machine number: ZBP 30
The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and for smaller wood chip boilers / heating systems. Any material from a wood processing plant (chips, dust etc.) can be briquetted.
Wood chips, sawdust, sawdust, etc. accumulate in all craft and industrial companies in the wood-processing industry. Enormous storage and transport costs are claimed daily. The briquetting press...
Briquetting press for aluminium chips
Equipped with special, optimized agitator, specially hardened wear parts and NEM sensors
Video of the plant can be sent to you.
*suitable for continuous operation
Demonstration machine with 15 operating hours
Briquette dimensions: approx. 30 x 30 mm (square),
briquette length: 5-40 mm *depending on material
throughput capacity: up to 25 kg/h. *depending on material
when tested with the material on the pictures approx. 21 kg/h
We part with our demonstration machine
15 operating hours and therefore as good as new * Includes 1 year warranty.
+ very robust, simple technology
+ Top price-performance ratio
+ Suitable for continuous operation
+ Long-standing, well-functioning / established machine
Including control cabinet with timer operation
Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off.
Engine: 7.5 KW
400 Volt / 50 Hz / 3-phase
Front connector : 125 mm
Briketthub max .: 100 mm
Briketthub opt .: 80 mm
Pump : 80 liters
Reservoir about 0.5 qbm content (expandable )
Diameter : 1200 mm
Hydraulic unit complete with oil tank 220 liters
Dimensions 2095 x 1600 x 1400 mm lxwxh
Weight 1300 kg
Automatic On-Off on level indicator
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.