Twin-shaft shredder

ARJES Impaktor 250 EVO 2 + 1 set paddle shafts

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, input voltage: 400 V, Mercodor Shredder ZM 44 with a cutting area of 600x380 m with 7.5 KW drive, knife assembly 19 mm, 3 hooks. Bwodpfx Ahjvupbzo Hjh

Condition: good (used), Weishaupt RL30/2A version EM Old throughput 195kg/h Bwjdpfx Ahsig Tw Ee Heh

Condition: reconditioned (used), Year of construction: 2018, operating hours: 6,070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 Bjdpoxmvn Ijfx Ah Hjwh - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP - AdBlue - Remote control - Hydraulic drive (self-propelled) - Weight: 25,000 kg Machine has been workshop overhauled and is immediately available.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Bwodpfx Ahjv Rpxlj Hjh Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Bsdpfx Ajxx R Rhsh Hjwh Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: good (used), Offered is a used double toggle jaw crusher from Krupp. Good condition, fully operational. 500 x 300 mm, 15 kW, new tools. The motor is currently being overhauled. Bodjwy U Icjpfx Ah Howh

Condition: new, Fully automated in-line machine for stable and precise stacking of pallets. PSR is user-friendly and easy to adjust for various pallet sizes. The machine stacks pallets safely and precisely in stacks ready for loading or storage. PSR is used in the end of a production line. How does it work? PSR lifts up the stack with the two lifting arms and a chain conveyor drives a new pallet or deck in under the stack. Adjust the settings for the pallet sizes easily with the push of a button. Mychrome has various additional machinery that can easily be docked on to existing machines in order to build a longer line where more stages can be automated. The possibility to modify the design and the size of the pallets is still available with the additional machinery. Deck/ pallet size: Min / max length: 600 mm - 1 600 mm Width min / max: 600 mm - 1 600 mm Bwjdpfx Ahewduv Ie Hsh Specifications: Operators | 0 Length | 3,3 m Width | 2,5 m excluding platform ladder Height | 2,3 m Power | 3 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 200 L/min Machine capacity | 4 pallets or decks /min Standard equipment | Motorized adjustments

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. Bsdpfx Ahsghgd Io Hjwh These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle Bsdpfxehwwpzo Ah Hswh boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Bwedpsxl Rqbefx Ah Heh Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level