Double diaphragm pump

ARO PD30A-BSS-STT-C

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Kdsdjvhctwepfx Apdjl Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Kdsdoihh Spopfx Apdsl Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: excellent (used), Year of construction: 1995, operating hours: 45,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale is a Loos steam boiler with Weishaupt oil burner. Gas burner available upon request. The unit is in very good condition. Model UL-S 5000, year of manufacture 1995. Steam output: 5,000 kg/h. Maximum steam pressure: 10 bar. Delivery available at extra cost. On-site inspection possible. Please contact us if you have any questions. Ksdoydq I Sopfx Apdedl

Year of construction: 2013, condition: like new (used), functionality: fully functional, PiGo Fruit Pitting Machine – Sour Cherry & Plum | Stainless Steel | Fully Overhauled | 2 Machines Manufacturer: PiGo (Italy) Type: Industrial Fruit Pitting Machines Quantity: 2 Units Condition: Fully Overhauled – Ready for Production Material: Stainless Steel (INOX) Complete Processing Line Includes: - 2 × PiGo pitting machines - Stainless steel machine stands - Screw conveyor for pit removal - Feeding conveyor belt for fruit infeed at platform Overhaul & Service: The machines have undergone a comprehensive general overhaul: ✔ New chains fitted ✔ New plates and needles ✔ Gearboxes serviced ✔ Bearings replaced ✔ Oil replaced ✔ Fully tested and ready for immediate operation Tool Sets Included (per machine): For sour cherries: - 11/22 mm - 13/28 mm For plums: - 37/20 mm Ksdpsynwzmofx Apdedl - 42/20 mm Advantages: - Industrial processing capacity - Heavy-duty, high-capacity machine - Stainless steel construction Sale Conditions: - Sold only as a complete package - Warranty available - Inspection possible upon request Location: Croatia (EU) *More pictures and videos available upon request.

Condition: good (used), Technical data are shown on pictures. Kjdpsp N Aq Hofx Apdedl

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Kdedpfsq U A Huox Apdol

Condition: good (used), functionality: fully functional, FKI Babcock Robey Lincoln Steam Boiler (2 units) Manufacturer: FKI Babcock Robey Model: Lincoln Heating: Gas-fired Kdodpfeya Nalsx Apdsl Power output: 5,237 kW Steam capacity: 8,000 kg/h Burner: DBL BD6-6 (year 2017) Burner output: 18.5 kW Control panel: disconnected Weight per unit: 18,000 kg Overall dimensions: 7,000 x 3,500 x 3,600 mm The FKI Babcock Robey Lincoln steam boiler is an industrial unit designed to generate process steam for manufacturing facilities. With its high power and a steam output of 8,000 kg per hour, it is ideally suited for installations that require a stable and reliable source of thermal energy. The boiler is equipped with a gas heating system and a DBL BD6-6 burner from 2017, ensuring efficient and economical combustion. Its robust, heavy-duty construction provides durability and safe operation in industrial environments.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Kdedpevddkvjfx Apdjl Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: used, functionality: fully functional, * Infeed fresh tomato in the factory 2000 tons/day (83.783 kg/hour) - 5º Brix Kjdpfx Aewny Ikopdsdl * Infeed to evaporator 61,016 kilos/hour (4th effect) - 6.9º Brix * Outfeed 15,600 kilos/hour - 27º Brix

Condition: used, Year of construction: 2024, Hot fill new filling machine up to 4500 Lt/h Introduction: The filling machinery is a perfectly reliable option for bottling operations. With a nominal speed of approximately 4500 liters per hour, this system offers consistent performance and unparalleled versatility for an array of products. Description of the Machinery: The Hot fill new filling machine up to 4500 Lt/h comprises a filler with 20 taps, each outfitted with a 22 mm diameter straw. Furthermore, all components in direct contact with the liquid are meticulously crafted from stainless steel 316, thereby ensuring maximum hygiene and resilience against corrosion. A dedicated pump efficiently channels liquid to the filler, while the inclusion of false bottles facilitates the thorough cleansing of taps. The bell, adjustable in height via electric drive, confers adaptability in accommodating containers of varying sizes. Moreover, the machine’s rotation speed is subject to variability through an inverter, thereby affording precise control over the filling process. Mechanical pistons for bottle lifting, guided with precision, ensure the attainment of accurate and uniform filling. Constructed entirely from stainless steel, the filler  is fortified with safety precautions encircling its perimeter, thereby safeguarding operators during operation. Additionally, bottle entry, ingeniously positioned from the left, streamlines workflow. Currently configured for glass bottles, the machinery exhibits adaptability for rigid PET containers. Equipped with a mechanical valve exclusively dedicated to filling, the system ensures meticulous and dependable process control. Technical Specifications of the equipment: Year of construction: 2024 Nominal speed: approximately 4500 liters per hour Kedpevgvu Sofx Apdodl Materials: stainless steel 316 Weight: 900 kg Voltage: 380 volts three-phase plus neutral, 50 Hz Applications and Compatibility: The Hot fill new filling machine up to 4500 Lt/h 20 R. filler, tailored for containers with twist-off caps, presents light-pressure filling ideally suited for juices, liqueurs, or oils. Presently configured for jars with ample mouths, seamless adaptation for bottles is attainable. Noteworthy is its capacity to accommodate two distinct jar sizes. Conclusion: In brief, the new DAL TOSO filling machine, operating up to 4500 Lt/h, epitomizes a dependable and versatile solution for bottling operations. With steadfast performance, hygienic design, and operational flexibility, this system stands as an exceptional avenue for optimizing production and ensuring the quality of the final product.