Screw compressor

Atlas Copco GA45 VSD FF

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA45VSDFF screw compressor, WATER-COOLED machine with inverter and dryer, after service Technical data: Capacity: 8.67 m³/min; Bdsdpfoyt Hzgox Afxoc motor power: 45 kW; Max. pressure: 12.75 bar; year: 2010 Hours: 9714 h!!! 33,500 EUR net 41,205 EUR gross The compressor is fully operational, ready for work, with warranty. Service provided.

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Bdjdpfx Afexk U Arjxsc Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Bdsdpfxexdc Uve Afxsc

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Bodpfxswlp Hdj Afxedc Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Year of construction: 2007, condition: good (used), max. compressed air: 13 bar capacity: 390 m³/h max. inside temperature: 55°C max. outside temperature: 43°C electr. drive: 220 V, 1,64 kW weight: 80 kg Bdsdpfx Aed E S H Ejfxsc space requirement: 600 x 600 x 1000 mm

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW Bdsdpfjddhw Sjx Afxec space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 6.72 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With refrigerant dryer Bdjdpfxjukvvaj Afxjc 45 kw engine Capacity 6.72 m3/min Pressure 7.5 bar The compressor is fully functional.

Condition: used, Year of construction: 2003, Compressed air tank made of steel (galvanized) Technical dimensions / data: Available quantity: 1 Volume: 5000 liters Type of tank: pressure tank Outer diameter: 1400 mm Cylindrical height: 2870 mm Total height: 3710 mm Type of operating pressure: overpressure Operating pressure: 11 bar Operating temperature: -10 / +50 °C Equipment: Top: 2 x crane eyes 1 x ventilation Shell: 1 x manhole Bsdpfx Afjv Hmd Djxodc 2 x 2" socket 1 x 1 1/2" socket 2 x DN 80 flange socket Bottom: 3 x pipe feet 1 x 3/4" socket on the outlet For further equipment, see photos

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Bdsdpfeudy Sdjx Afxec

Condition: excellent (used), Year of construction: 2011, operating hours: 68,433 h, functionality: fully functional, Atlas Copco GA37VSDFF screw compressor, 13 bar, 7.25 m³/min. Integrated dryer and frequency converter. Motor and air end overhauled at approximately 65,000 operating hours. Bdedpfox Sv Smjx Afxec