Screw compressor

Atlas Copco GX2FF EP

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France) Gedot Hr Ahspfx Ab Uekf

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Gjdsw Rbx Ujpfx Ab Ujkf Y 813 mm Z 762 mm Linear position measurement system 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Oil mist extraction unit Ethernet interface RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. The machine is only partially functional.

Condition: good (used), Year of construction: 2002, Machine is in good condition. Gsdjtwpamjpfx Ab Ujkf Parts shown by hand not come.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Gksdpouxrv Hofx Ab Uef Technical data shown on pictures.

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.4450mm Width/depth (product): approx.1150mm Height (product): approx.1650mm Weight (net): approx.3000kg Working ranges: Center height: 280mm Center width: 2910mm Circumferential diameter over machine bed: 560mm Circumferential diameter in the bed bridge: 790mm Swing diameter over cross slide: 355mm Turning length in the bed bridge: 170mm Bed width: 350mm Speed range: Number of speed ranges: 12 Speed range: 25 - 1600min¯¹ Electrical data: Drive motor power: 7.5kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Gsdpfxjq Ukc Rs Ab Uekf Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar passage diameter: 80mm Steel holder mounting height: max.25mm Spindle cone: MK 7 Tailstock: Tailstock holder: MK 5 Tailstock quill stroke: 180mm Tailstock quill diameter: 75mm Pitch: Pitch metric: 0.2 - 14mm/rev Number of leads metric: 47 Pitch inch: 112 - 2Gg/1" Number of pitches inch: 60 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches: 34 Travel distance: Top slide travel: 130mm Travel of face slide: 316mm Bed slide travel: 2710mm Feed rate: Feed range longitudinal: 0.059 - 1.646mm/rev Number of longitudinal feeds: 35 Feed range flat: 0.020 - 0.573mm/rev Number of feeds flat: 35 Electrical connection: Total connected load: 8.5kW

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Condition: New machine Center height: 200 mm Center width: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Equipped as standard with - 3-axis digital readout DPA 21 - Machine base Godeq Ui Tdopfx Ab Uokf - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine Gksdpfxsg Hkmro Ab Uof center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: used, machine/vehicle number: 1 284 066, Chuck Ø: 200 mm Bore through: 50 mm Mounting, short taper according to DIN 55027: size 6 outside-Ø of the clamping cylinder: 290 mm Overall height (clamping cylinder to chuck front without jaws): 150 mm pneumatically operated Gkedpfx Abocm Tgko Uef

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Gksdpfx Abjvx Nmfe Ujf Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Forklift is provided.

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide Gkodpfx Aoucgr Ijb Uef - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set