Lead/traction spindle lathe

Optimum OPTIturn TH 5630D

Condition: used, Saimp KS Iron Lathe. Isdjv Sth Hepfx Ah Ujtr Max piece length 1000mm

Condition: new, 550 mm 550 mm 550 x 550 mm saw band length 5980 x 41 x 1,3 mm table height 800 mm band speed 20 - 100 m/min total power requirement 5,5 kW weight of the machine ca. 3,8 t dimensions 3,0 x 2,15 x 2,2 m Iodefg E Hwspfx Ah Ustr PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 Iodpfxet Hr Ahj Ah Ustr - 4-axis from SMP (France)

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Itedpfortd Uwsx Ah Uor Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: new, For grinding HSS and carbide engraving cutters, as well as cutters with one or more lips in different shapes, such as radius cutters or negative taper angle of cutters. The universal index head is provided at 24 positions so that any particular shape angle can be obtained, a free rotation of 360° or 10° is allowed for grinding finger milling cutters, rotary drill, lathe. Tool, only replace the attachment to the index head without complicated assembly. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding disc ×1 Spiral drill grinding attachment ×1 End mill grinding attachment ×1 Rotary tool grinding attachment ×1 Option collets: Ø3,Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. capacity of collet Ø3 - Ø18mm Max. grinding diameter Ø18mm Conical angle 0~180 ° Relief angle 0~45 ° Negative angle 0~25 ° Iodpfxeq E Ry Hj Ah Uetr Speed 5300 o/min Grinding disc Ø100 x 50 x Ø20mm Motor 375W Dimensions 550 x 460 x 490 mm Weight 51 kg

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW Iodpfx Ahednfz Ne Ujtr space needed: 600 x 450 x 1380 mm

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Ijdpovtyc Hefx Ah Uotr Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Workpiece length 2500 mm Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with Itodpfsk Egrpox Ah Usr digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm Iedpfx Aed Sitkeh Ustr spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t Itsdpfsd Afn Isx Ah Ujr - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.