Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 176, pressing force: 10 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 100 kN Year of conversion: 2018 Overtravel: 12 mm Dkslqxjv Na A Eok Inel Overtravel time: 80 ms

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, material thickness: 4 mm, product width (min.): 105 mm, product width (max.): 420 mm, product height (max.): 80 mm, product height (min.): 6 mm, product length (max.): 720 mm, product length (min.): 170 mm, A new mainframe computer (IPC) was installed in 2022. Ready for shipment: Machine can be shipped for an additional charge of €1,500! TECHNICAL DETAILS Cycle rate: 60 covers/min Setup time: approx. 5 min Processable formats Cover height: 170 - 720 mm Cover width: 105 - 410 mm Spine width: 6 - 80 mm Material thickness: 1 - 4 mm MACHINE DETAILS Area of application: Processing hardcovers, book covers, and 3-part covers EQUIPMENT Dkslqxewbtmgok Insl - Soft spine feeder

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 13676, number of slots in tool magazine: 20, Equipment: chip conveyor, Due to space requirements, the machine is being auctioned without a reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to pick up the machine by March 31, 2025! TECHNICAL DETAILS 4th axis: Dividing head mechanically functional, however, the circuit board needs to be replaced Tool changer: 20-station Chip conveyor: Available Filter system: Paper belt filter Operating voltage: 360 - 480 V Further technical data according to the manufacturer - without guarantee X-travel: 1,270 mm Y-travel: 508 mm Z-travel: 635 mm Spindle speed: 8,000 rpm Control: CNC Haas Table length: 1,321 mm Table width: 457 mm Spindle nose to table: 107 - 742 mm Workpiece weight: 793 kg T-slot width: 16 mm T-slot spacing: 80 Number of T-slots: 5 Tool changer: 20 Tool diameter: 89 mm Dolqev Ni A Iexk Injkl Tool weight: 5.4 kg Spindle taper: CAT 40 Dimensions: 2.8 x 3.0 x 3.2 m Weight: 5.5 t

Condition: good (used), Year of construction: 2000, operating hours: 21,900 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, table width: 1,230 mm, table length: 410 mm, TECHNICAL DETAILS X-travel: 700 mm Djlqxk Iev Du E Denokl Y-travel: 315 mm Z-travel: 495 mm Quill travel: 180 mm Control: Heidenhain TNC 426 4th axis: available Table clamping area: 1,230 x 410 mm Tool holder: SK 30 MACHINE DETAILS Total power requirement: 20 kW Machine weight: approx. 3.2 t Operating hours: 66,200 h Spindle hours: 21,900 h EQUIPMENT - Renishaw measuring probe Tools, clamping devices and accessories are only part of the scope of delivery if they are listed under EQUIPMENT.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Dsljvzp Uzeqxk Inokl Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: good (used), Year of construction: 2012, Functionality: fully functional, TECHNICAL DETAILS Area of application: bottling of water without CO₂ Installation location: mineral water factory in France Performance and capacity Max. performance: 32,000 bottles per hour Bottle size: 1.5 l Suitable mouth: 29/25 Capping system Delqxk Ijv Iqpaenskl Capping machine: Zalkin Number of closing elements: 18 Capping holder: pick-and-place system Capping feed: yes Enclosure: yes Working direction Operating direction: clockwise (left to right)

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101742, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm EQUIPMENT Tool changer Further information according to manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Tool diameter: 76 mm Tool slots: 24+1 Dolov Naw Nsqxk Inekl Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: used, Kramer & Grebe Type WW160 Stainless Steel Meat Grinder. S/No. 280/0277, 160mm Diameter Throat, Loading Device, Tetra Laval Control. (CE Marked) Delqxk Iowayl Hsnekl Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, Functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain X-travel: 880 mm Y-travel: 630 mm Z-travel: 630 mm B-axis: -30° / +90° C-axis: available Spindle and drive Spindle speed: 20-12,000 rpm Spindle mount: SK 40 DIN 69871 Torque at 40% / 100% duty cycle: 28 / 19 kW Table and workpiece Table size: 1,250 x 700 mm Table load: 650 kg Dkjlqxjv Suuzjk Injl NC rotary table: Ø 800 mm Tool magazine Tool changing device: 2 × 16 positions MACHINE DETAILS Total power requirement: 44 kW Machine weight: 9.5 t Space requirement: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 touch probe - Rotoclear - Flushing gun - High-pressure pump - Chip conveyor - Air filtration system - Internal coolant system

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 122009984, travel distance X-axis: 3,850 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 280 mm, rotational speed (max.): 24,000 rpm, number of slots in tool magazine: 8, No reserve price - guaranteed sale at the highest bid! Doljvyg Szeqxk Inskl For milling, drilling and thread cutting work on aluminum, PVC and thin-walled steel profiles for applications in window, facade and metal construction! CONDITION Spindle: New bearings Frequency converter: Recently replaced Tool change: Automatic tool change requires a new sensor - little effort TECHNICAL DETAILS Areas of application: Aluminum, PVC and steel processing Software/control: PC-based EluCam software Processing area X-axis travel: 3,850 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rates (rapid traverse) X-axis: 60 m/min Y-axis: 30 m/min Z-axis: 30 m/min Spindle Power: 7 kW Max. speed: 24,000 rpm Tool holder: HSK-F63 angle head (as new, hardly used) Tool changer Type: Automatic tool changer Places: 8 Vices Number: 12 pneumatic double vices Safety equipment Included: light barrier and safety fence MACHINE DETAILS Machine weight: approx. 2,000 kg Dimensions: approx. 5.1 x 3.4 x 2.6 m

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: FH.FNJF-00296 / 1224402827, paper weight (min.): 40 g/m², paper weight (max.): 250 g/m², paper width (min.): 150 mm, paper width (max.): 780 mm, paper height (min.): 180 mm, paper height (max.): 1,200 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum paper format: 780 x 1,200 mm Minimum paper format: approx. 150 x 180 mm Paper weight: 40 - 250 g/m² Maximum mechanical speed: up to 230 m/min Folding types: parallel fold, zigzag fold, altar fold, window fold, etc. EQUIPMENT - 6 folding pockets for versatile folding types - 1 blade for additional folding options - Heidelberg PFH-82 pallet feeder for continuous sheet feed - Steel vertical sheet delivery SBP 66.D-MKE for precise sheet placement Dolqjv Imuxexk Injkl - Automatic settings for quick job changes - Touchscreen operation for easy control

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, product length (max.): 1,200 mm, product length (min.): 800 mm, product width (max.): 1,000 mm, product width (min.): 600 mm, TECHNICAL DETAILS Components: Ocme palletizer and two Robopac Genesis stretch wrappers Area of application: Handling shrink containers Production capacity: max. 30,000 bottles per hour (depending on format) Palletizer PET 0.75L shrink wrappers: 2 x 32 PET 1.0L shrink wrappers: 3 x 2 PET 1.5L shrink wrappers: 3 x 2 / 3 x 4 Euro pallet format: 800 x 1,200 mm Chep Düsseldorfer pallet format: 600 x 800 mm Industrial pallet format: 1,000 x 1,200 mm Speed: 42,000 bottles per hour Feeding: Two lanes, low feed Delqxk Iov Iqa Ssnokl Wrapping machines (2x) Manufacturer: Robopac Model: Genesis Cube Year of manufacture: 2014 Additional functions: Film covering unit Processed pallet formats: Same as palletizer EQUIPMENT - Empty pallet magazine - Interlayer magazine - Interlayer inserter - Safety fence - Ocme Pegasus F450 palletizer - Two Robopac Genesis Cube wrapping machines - Ergonomic lifting device for film rolls

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1108262, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Equipment: Chip conveyor Further information according to the manufacturer - without guarantee Travel X / Y / Z: 406 x 305 x 254 mm Dkelqxk Iev Natdonjl Distance spindle to table: 356 mm Spindle speed: 10,000 rpm Tool taper: #40 Table dimensions: 730 (914) x 305 mm T-slot spacing: 110 mm T-slot width: 16 mm Number of slots: 3 Table load: max. 227 kg Tool diameter: 89 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 10 Machine dimensions: approx. 2.3 x 2.3 x 2.7 m Weight: approx. 1.6 t

Year of construction: 2004, Condition: used, Angelli Model A500/540 Ravioli Cappelletti Forming Machine. S/No. S901.NO323 (2004) Incomplete Dkslqxk Iewayhuenel Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: not inspected (used), Year of construction: 2006, overall weight: 1,270 kg, arm reach: 2,655 mm, controller manufacturer: FANUC LTD, type of input current: AC, We offer you, Two six-axis industrial robots R-2000iA/210F with two R-J3IB controllers manufactured in 2006 by the Japanese manufacturer FANUC. Industrial robots R-2000iA/210F: Range and dimensions: - maximum range: 2655mm; - robot height: 2850mm; - working range: *axis 1 ±360° *axis 2 ±135° *axis 3 ±166° *axis 4 ±360° *axis 5 ±125° *axis 6 ±360° Load capacity and precision: - maximum load capacity: 210kg; - repeatability: ±0.2mm; - axis speeds: *axis 1 100°/s *axis 2 90°/s axis 3 95°/s *axis 4 120°/s *axis 5 120°/s *axis 6 190°/s Power and energy consumption: - drive power: 5.4kW; - supply voltage: 380-575V AC, 50/60Hz; - power consumption: average 5kVA; Operating environment: - operating temperature: 0°C to 45°C; - humidity: maximum relative humidity 95% (non-condensing); Dkelqxk Isv Ewkfonel - degree of protection: IP54 (robot body), IP67 (wrist); - robot weight: 1270kg; Control and software: - controller: R-J3iB, R-30iA (depending on configuration) - user interface: Pendant Teach (programming console) - communication options: Ethernet, DeviceNet, Profibus, Profinet, EtherCAT, Modbus R-J3IB controllers: Technical parameters: - weight: 180kg - voltage: 380-415/440-500VAC - frequency: 50/60Hz - number of phases: 3 - rated power: 12kVA

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, edge thickness (max.): 22 mm, product height (max.): 65 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 50 mm, TECHNICAL DETAILS Type: Single-sided automatic edge banding machine Control: CNC with 10" touchscreen Industrial conveyor chain: 1" 1/4 Feed speeds: 10 - 14 - 18 - 20 m/min Milling and processing units Joining milling unit: FI-502 Glue application unit: VC-710 Cutting unit: IN-801 Flush milling unit: RS-100 (top and bottom) Multifunctional unit: CR-202 (FAST system with 4 positions standard) Scraping unit: RBK-503, NC (2 positions) Flat scraper: RCC-701 Workpiece specifications Workpiece thickness: 10 - 65 mm Maximum workpiece height with form milling unit: 35 - 65 mm (depending on profiles) Edge thickness of rolled goods: 0.4 - 3 mm Edge thickness of strips: 0.4 - 22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (for a length of 140 mm): 85 mm Minimum workpiece width (for a length of 250 mm): 50 mm Glue application Glue container capacity: approx. 3 kg Heating time when 1/2 full: approx. 10 min MACHINE DETAILS Length: 6,000 mm Width: 1,780 mm Height: 1,770 mm Central extraction connection: 200 mm Gluing extraction connection: 80 mm Joining milling extraction connection: 120 mm EQUIPMENT Dkjlqxkovzydto Inel - CNC control with 10" touchscreen - Jointing milling unit FI-502 - Glue application unit VC-710 - Cutting unit IN-801 - Flush milling unit RS-100 (top and bottom) - Multifunctional unit CR-202 with 4 positions - Scraper unit RBK-503 with NC control (2 positions) - Flat scraper RCC-701 Note: Machine is delivered without the workpiece return device shown in the pictures.

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 011003, paper width (min.): 210 mm, paper width (max.): 738 mm, paper height (min.): 297 mm, paper height (max.): 1,300 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Djlqjv Imicexk Inskl Construction: 4 folding pockets in the first folding unit, 2 knife folding stations Maximum paper format: 738 x 1,300 mm (with round pile feeder) Minimum paper format: 210 x 297 mm Folding length: 35 - 560 mm (58 mm in pocket 1) Performance: Up to 230 m/min, 25,000 cycles/h in cross fold Paper thickness: 40 g/m² and more MACHINE DETAILS Dimensions (L x W x H): 485 x 166 x 165 cm Total weight: 2,235 kg Power connection: 400 V Power consumption: 4.0 kW EQUIPMENT - Automatic setting for quick and precise setup - Round pile feeder with 80 mm stack height for continuous reloading - Glue station HHS-C220 for additional processing options - Touch screen operation for easy handling

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 17037, travel distance X-axis: 1,050 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,160 mm, workpiece weight (max.): 1,000 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 240, No reserve price - guaranteed sale at the highest bid! Incl. refurbished second spare spindle and refurbished drive motor. Machine with rotary pallet storage and extended tool magazine! TECHNICAL DETAILS X-axis: 1,050 mm Y-axis: 1,000 mm Z-axis: 1,160 mm Dkelqxk Iev Ai Uwjnjl Distance from spindle front edge to workpiece carrier center: min. 190 mm Distance from spindle center to workpiece carrier top edge: min. 100 mm Spindle Speed range: 50 - 10,000 rpm Motor power (40% duty cycle): 31 kW Motor power (100% duty cycle): 19 kW Torque (40% duty cycle): 200 Nm Torque (100% duty cycle): 165 Nm Spindle mount: SK-50 Tools Chip-to-chip time (at rapid traverse 40 m/min): 8 s Tool diameter (with free neighboring positions): 250 mm Tool diameter (with occupied neighboring positions): 125 mm Tool length: 800 mm Tool mass: 35 kg Total mass of all tools in the storage: approx. 720 kg Number of tool positions: 240 Measuring system Type: Linear, optical-incremental, distance-coded Accuracy class: ±5 µm Division period of the grating division: 20 µm Input and display unit: 1 µm Pallets Clamping surface: 630 x 630 mm Loading mass per pallet (at rapid traverse 40 m/min): 1,000 kg Permissible moment with off-center load: 750 Nm Directional bore diameter: 25 H6 Hole distance to table center: 200 ± 0.013 mm Fastening thread: 23 x M16 Workpiece clearance height: 1,200 mm Maximum interference circle: Ø1,100 mm (flattened) Automatic pallet change Number of changeable pallets: 2 + 4 pallets in the circular storage Pallet change time (for standard version): 12 s Pallet change time (for version with clamping hydraulics at least): 14 s MACHINE DETAILS Dimensions: 8,200 x 4,400 x 3,600 mm Weight: 18 t Connection power: 75 kVA Temperature range: 10 - 35 °C Sound pressure level: < 80 dBA

Year of construction: 2011, Condition: ready for operation (used), Functionality: fully functional, saw blade diameter: 550 mm, conveyor belt length: 300 mm, conveyor belt width: 6,000 mm, machine/vehicle number: 0112613,, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Sawblade diameter: 550 mm Roller conveyor: 300 x 6,000 mm Material feed Feed: automatic Material clamping: present Dkslqxev I U R Iok Inel EQUIPMENT - Automatic feed - Material clamping - Control system - Chip extraction system - Two light barriers Further information according to the manufacturer - without guarantee Machine length: approx. 17.2 m Sawblade speed: approx. 2,800 rpm U-axis travel: approx. 7.4 m Sawblade swivel range: -45° to +45° Maximum loading length: 7,200 mm

Condition: good (used), Year of construction: 2016, SN: 111399, control, type CNC-C00, 3 + 1 axes, tool holder BT30, spindle speed max. 10,000 rpm, tapping speed max. 6,000 rpm, cooling through the spindle (IKZ) 30 bar, travel paths X/Y/Z 650 x 400 x 305 mm, rapid traverse speed X/Y/Z max. 50 m/min, feed speed X/Y/Z 1 - 30,000 mm/min, tool change time 0.9 s, 22 tool magazine positions, rotary table, make Lehmann, type 2XEA510, space requirement 1,900 x 3,500 x 2,700 mm, dead weight 3,500 kg, chip conveyor, make Hakusan, SN C095934, hydraulic unit, suction, make Sara, air gap control, chip hopper Dkelsv Aawijqxk Inol

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Equipment: Dkelev Ev Tleqxk Inel -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, feed rate X-axis: 18 m/min, edge thickness (max.): 8 mm, product height (max.): 45 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Edge Control with 18.5" touchscreen color screen (16:9) Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Motorized Feed: Using a transport chain Feed speed: 8 - 18 m/min Workpiece support: Extendable Infeed ruler: Motorized adjustable Edge thickness of rolled goods: 3 mm Edge thickness of strip goods: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Milling and processing units Joining milling unit: 1961 Cutter type: Diamond jointing cutter in synchronous and counter-rotating motion Workpiece height adjustment: Automatic Edge feed & Glue application Edge feed: 1903 Pre-capping: Up to 3 x 45 mm (depending on material) Dolqxkovzyble Injkl Glue application system: 1905 Multi-System Glue height adjustment: Automatic with sensing nozzle Pressure regulator: For regulating the cartridge contact pressure PUR glue use: Possible Printing unit & cutting unit Printing unit: 1913 MOT Drive: 1st roller driven Cutting unit: 1918 with pneumatic adjustment Cutting saw: Pneumatically pivotable Milling and edge processing Multifunctional unit: 1824 MOT 4 Milling cutter: Multifunctional milling cutter radii 1,2,3 mm Corner copying unit: 1832 Corner copying function: Up to 3 mm edge thickness Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Pneumatic adjustment: Top and bottom separated Cleaning & polishing Chip collection box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Spray device: 1856 for the inlet and outlet area Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Power of jointing cutter: 2 x 2 kW Power of cross-cut saw: 2 x 0.22 kW Power of milling station: 2 x 0.35 kW Power of corner copying: 0.22 kW Extraction nozzle of jointing milling unit: 120 mm Extraction nozzle of milling unit: 70 mm Extraction nozzle of scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - Swiveling control panel - Program memory - Motorized pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motorized infeed ruler - Diamond jointing cutter in synchronous and counter-rotation - Automatic adjustment to workpiece height - Pre-cutting up to 3 x 45 mm (depending on material) - Glue application system with automatic glue height adjustment and sensing nozzle - Pressure regulator for cartridge contact pressure - PUR glue can be used - Printing unit with driven 1st roller - Cutting unit with pneumatic adjustment - Pneumatically swiveling cutting saw - Multifunctional unit for radii 1,2,3 mm - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized sensing roller adjustment - Chip collection box for radius scraper - Surface scraper for clean adhesive joint - Extraction hoods - Spray device for inlet and outlet area - Buffing unit for cleaning and edge polishing

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 54796/14A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Dolqxov I Uwuek Inokl Maximum mold height: 355 mm Mold upper section weight: 250 kg Mold height at bottom of cylinder: 355 mm MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: good (used), Year of construction: 2014, SN: 254141, dead weight 8,400 kg, control, make Mazak, type Mazatrol Matrix 2, chuck diameter 8°, oscillation diameter max. 320 mm, max. machining length (chuck workpiece) 180 mm, max. machining length (shaft workpiece) 530 mm, bar diameter max. 51 mm, spindle (HD1 and HD2) speed max. 5,000 rpm, rated power (30 min operation) 22 kW, turret (left/right), 12 turret stations, axis feed/travel paths: rapid traverse X1/X2 30,500 mm/min, rapid traverse Z1/Z2 33,000 mm/min, travel path X 240 mm, Y 100 mm, Z 440 mm, travel path Z (HD2) 496 mm, L/W/H 3,670 x 1,996 x 2,090 mm Dkelqov Aavfoxk Inol

Year of construction: 2017, Condition: not inspected (used), Functionality: unexamined, We offer you, HI-SCAN 6046si detector manufactured in 2017 by Malaysian manufacturer SMITHS DETECTION. X-ray inspection system designed for security checks of baggage, parcels, or screening of technical products. Dkolqxk Iov Ewdxjnol Physical dimensions: length: 2004mm (79 inches) width: 850mm (33 inches) Through-hole size: 62 x 45 cm Tape width 53cm X-ray generator: voltage: 160kV; penetration: ability to penetrate steel up to 37mm; detector: high-resolution XADA detector modules; resolution: ability to detect wires up to AWG 41; total weight: 400kg (882 pounds) During the inspection, the machine was disconnected from the power supply - no possibility of testing in operation.