Second-hand machinery for sale (2,374)

Condition: excellent (used), Year of construction: 2017, operating hours: 16,193 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 38, swivel angle A-axis (min.): -139 °, swivel angle A-axis (max.): 91 °, swivel angle C-axis (max.): 360 °, A similar machine was recently successfully auctioned! Bidding obliges the buyer to pick it up on time by March 31, 2025! TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Linear acceleration X-Y-Z: 6 m/s² Linear feed force X-Y-Z: 7,000 N Max. jaw width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 pieces Chip-to-chip time: approx. 6 s Tool length: max. 300 mm Tool diameter with adjacent position occupied: Ø 80 mm Tool diameter without adjacent position occupied: Ø 125 mm Tool weight: max. 8 kg Magazine load: max. 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering hole: Ø 32 H7 Swivel range: +91° / -139° Drive type C axis: worm Speed of swivel axis A: 25 rpm Speed of rotary axis C: 30 rpm Table load One-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Cooling lubricant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Mains connection (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filter: police filter, paper belt filter Dkolqjv Hmdqsxlg Tel Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control switch-on time: 24,403 h Machine switch-on time: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Weight: approx. 9.5 t Mains connection Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip flushing gun - Emulsion mist extraction - Scraper belt conveyor - Blow-off device - Blowing air through the center of the spindle - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical heat compensation from Heidenhain. - Electrical manual control module from Heidenhain.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 25,000 h, Functionality: fully functional, rotor diameter: 495 mm, rotor length: 2,000 mm, rotor speed: 125 rpm, inlet: 2,200 mm, Seller offers a 1-year or 2,000-hour warranty. No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Application: Shredding plastics Inlet length: 2,200 mm Inlet width: 2,000 mm Rotor length: 2,000 mm Rotor diameter: 495 mm Rotor speed: 125 rpm Number of blades: 56 (60 x 60 mm) Dkolqxlgjv Rfgxs Tjl Electrical data Motor power: 132 kW Voltage: 400 V Frequency: 50 Hz MACHINE DETAILS Machine weight: 14,000 kg EQUIPMENT - Fully insulated rotor bearings - Machine supplied with a bridge breaker (top feed) for shredding bulky, low-density waste - Steel support - Feed hopper - Electrical control panel - Installation drawings, drawings of the machine frame and feed hopper, operating instructions, and electrical diagrams available - Spare rotor - Operating instructions and electrical diagrams - Drawings - Maintenance manuals

Condition: good (used), Year of construction: 2017, operating hours: 25,790 h, Functionality: fully functional, laser power: 2,000 W, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 8 mm, working range: 6,500 mm, pipe diameter: 152 mm, Equipment: documentation/manual, safety light barrier, Pipe laser cutting system including LoadMaster and discharge station TECHNICAL DETAILS Laser power: 2,000 W (TruDisk 2001) Control: Siemens Sinumerik 840 D Working area Pipe material length: 6,500 mm Envelope circle diameter: 152 mm Workpiece weight: 20 kg/m Finished part length: 1,500 m Max. speed: 170 m/min (steel), 120 m/min (stainless steel), 60 m/min (aluminum) Accuracy: +/- 0.1 mm Maximum sheet thicknesses Max. sheet thickness (steel): 8 mm Max. sheet thickness (stainless steel): 4 mm Max. sheet thickness (aluminum): 3 mm MACHINE DETAILS Width: 2,800 mm Length: 7,000 mm Height: 16,000 mm Weight: 17,000 kg Operating hours: 25,790 h (total) / 20,950 h (laser) Safety functions: Multi-beam light barriers, monitoring system for gas pressure, temperature and cooling water Protective cabin: With certified safety windows EQUIPMENT - Feed station with self-centering clamping jaws - Pipe support with automatically retractable pipe supports - Push-through chuck, self-centering parallel clamping rollers - High-precision drives with digital three-phase servo motors - LoadMaster Tube 6.5 m with bundle trough - Discharge station 3 m including scrap conveyor belt with container - Parts storage (includes belt table and belt table extension) - Closed beam guidance - NitroLine - FocusLine - External solid-state laser TruDisk 2001 with one LLK output and excitation via Pump diodes - Lens cutting head with 150 mm focal length - Clamping jaws (1 set) - Quick-change mold shells for round tubes up to 0 152 mm - Quick-change mold shells for rectangular tubes up to HK 85 mm - Quick-change mold shells for rectangular tubes up to HK 170 mm - Guide rollers for round and rectangular tubes (1 set) - SeamLine Tube with internal detection - PierceLine - Adaptive clamping technology - Feed station - Automatic setup Dkolqovwb A Nsxlg Tjl - Tube diameter 15 mm LoadMaster Tube 6.5 m (12 mm semi-automatic via conveyor line) - Set of U-shaped mold shells

Condition: ready for operation (used), Year of construction: 1996, operating hours: 78,796 h, Functionality: fully functional, machine/vehicle number: 11602, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, TECHNICAL DETAILS Travel paths (X/Y/Z): 600 x 450 x 500 mm Table size: 900 x 520 mm Max. table load: 450 kg Control: HEIDENHAIN TNC 426 Dkslqxlgsv Diyce Tol Speed range: 20 - 6,300 rpm Tool holder: SK40 Drive power: 8.6 kW MACHINE DETAILS Machine dimensions (LxWxH): approx. 2.95 x 2.20 x 2.30 m Space requirement (LxW): approx. 4.55 x 3.60 m Total weight: approx. 4,900 kg Operating voltage: 400 V/3 ~50 Hz

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad Dslqxsv E Ibnolg Tekl - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: ready for operation (used), Year of construction: 2007, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 20907, feed length X-axis: 380 mm, feed length Y-axis: 280 mm, feed length Z-axis: 280 mm, swivel angle A-axis (max.): 360 °, swivel angle C-axis (max.): 340 °, Spindle replaced about 6 years ago - only 8,000 spindle hours! TECHNICAL DETAILS Control: Fanuc GE 160 i Length: 950 mm Width: 310 mm T-slots: 3 x 14 mm Grinding head, grinding spindle Spindle type: Motorized swiveling Drive power: 7.5 kW Speed range: 0 - 9,000 rpm Wheel mount: HSK 50 Wheel diameter: 50 - 200 mm Max. number of wheels: 6 Axes Travel X / Y / Z: 380 / 280 / 280 mm Rapid traverse X / Y / Z: 20 / 20 / 10 m/min Resolution X / Y / Z: 0.0001 mm Drive power X / Y / Z: 1.0 kW, 3 Nm C-axis swivel angle: 340° Rapid traverse: 66°/s Resolution: 0.001° Drive power: 1.0 kW, 3 Nm Rotational axis A: continuous Rapid traverse: 167°/s Resolution: 0.001° Drive power: 0.5 kW, 2 Nm Dslqsv Iptqsxlg Tokl Mounting taper: ISO 50 Spindle height: 210 mm MACHINE DETAILS Width: 1,590 mm Depth: 1,930 mm Height: 2,250 mm Weight: 5,500 kg Noise level: < 70 dB(A) according to DIN 45 635 Operating hours: 30,000 h Power supply Motor power: 7.5 kW Connected load: 33 kVA Voltage: 3 x 400 V AC Hydraulics Type: DMR 300 Principle: Gear pump Drive: Electric motor Voltage: 3 x 230/400 V Filling volume: 11 L Pendulum volume: 4 L Flow rate: 2.8 L/min Operating pressure: max. 98 bar Pneumatics Type: CFG 301 Machine air consumption: approx. 2,000 l/h Measuring system air consumption: approx. 3,000 l/h Air consumption: approx. 1,000 l/h Fire extinguishing system: yes Working pressure: 6 bar Maintenance: Maintenance-free, except for the filters Air quality: according to DIN ISO 8573-1 Central lubrication Type: CFG 012 Principle: Gear pump Drive: Electric motor Tank capacity: 30 bar Pressure limitation: 0.2 l/h Flow rate: 0.2 l/h Ambient temperature: +10°C to +40°C Protection class: IP 54

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, edge thickness (max.): 8 mm, product height (max.): 45 mm, product height (min.): 6 mm, product length (min.): 180 mm, TECHNICAL DETAILS Control: Convenient PLC control Aggregates: All can be selected individually Error management: Integrated operating data acquisition and error diagnosis Control panel: Swiveling Program memory: Available Pressure bridge adjustment: Manual Feed: Using a transport chain Feed speed: 8 / 16 m/min Workpiece support: Extendable Workpiece and edge material Edge thickness of rolled material: 3 mm Edge thickness of strip material: 8 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 6 - 45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Distance between workpiece support: 470 mm Support plate Ø for edge material: 800 mm Infeed & material feed Infeed ruler: Motor-adjustable Edge feed: 1903 Material feed: Automatic feed of roll and Strip goods Milling and processing units Joining milling unit: 1961 Joining milling cutter power: 2 x 2 kW Milling cutter type: Diamond jointing cutter in parallel and counter-rotating motion Immersion path: 5 mm Adhesive application Adhesive application system: 1906 M with automatic reloading Glue height adjustment: Automatic with sensing nozzle Printing unit & trimming unit Printing unit: 1913 Number of rollers: 3 1st roller: Driven and pneumatically controlled Other rollers: Pneumatically actuated Cutting unit: 1918 Cutting saw: Pneumatically pivotable from 0° to 10° Milling and edge processing Multifunctional unit: 1942 MOT 2 for flush, radius and chamfer milling Adjustment: Motorized Corner copying unit: 1832 Maximum edge thickness for corner copying: 3 mm Radius scraper: 1929 MOT 2 Tactile roller adjustment: Motorized (horizontal) Cleaning & polishing Chip catcher box: For radius scraper Surface scraper: 1964 (for removing the adhesive residue for a clean adhesive joint) Extraction hoods: Available Buffing unit: 1940 (for cleaning and polishing edges) Performance data & extraction Cutting knife for rolled goods up to: 3 mm Heating time: 3.5 min Cutting saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction nozzle for joint milling unit: 120 mm Extraction nozzle for milling unit: 70 mm Extraction nozzle for scraper unit: 70 mm MACHINE DETAILS Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm EQUIPMENT - PLC control with plain text display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed by means of transport chain - Extendable workpiece support - Motor-adjustable infeed ruler Dolqxovzyi Njlg Tjkl - Jointing milling unit with diamond jointing cutters in synchronous and counter-rotating motion - Automatic feeding of rolls and strips - Glue application system with automatic reloading - Automatic glue height adjustment with tactile nozzle - Printing unit with 3 rollers (1. roller driven) - Cutting unit with pneumatically pivoting cutting saw - Multifunctional unit for flush, radius and chamfer milling - Corner copying unit up to 3 mm edge thickness - Radius scraper with motorized feeler roller adjustment - Chip catcher box for radius scraper - Surface scraper for clean adhesive joints - Extraction hoods - Buffing unit for finishing and polishing edges

Condition: refurbished (used), Year of construction: 2012, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: 139640, power: 247 kW (335.83 HP), rotational speed (max.): 270 rpm, torque: 8,700 Nm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Power: 247 kW Number of poles: 24 Rated speed: 270 rpm Rated torque: 8700 Nm Voltage (Un/In): 345 V / 490 A Maximum current: 855 A Mechanical data Maximum torque: 14,720 Nm Protection class: IP 54 Operating mode: S1 Dkslqxlgsv Rd Nfe Tsl Control & sensors Encoder type: Hübner MHG400 Control: SSI/SinCos Cooling Cooling type: Water Water flow rate: 20 l/min MACHINE DETAILS Weight: 1,180 kg

Condition: reconditioned (used), Year of construction: 1988, Functionality: fully functional, center height: 180 mm, workpiece weight (max.): 250 kg, center width: 650 mm, grinding wheel diameter: 400 mm, spindle speed (max.): 450 rpm, spindle speed (min.): 30 rpm, TECHNICAL DETAILS Grinding process: external grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece and tailstock data Workpiece spindle: MK 4, Speed: 30 to 450 rpm Swivel range: 0 - 90° Tailstock: MK 4, quill stroke 45 mm Quill force: 200 - 600 N Table inclination: 10° Movement and adjustment ranges Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Drives and motors Grinding spindle motor outside: 4 kW Dkjlqxlgsv Hrixe Tol Grinding spindle motor inside: 2.2 kW Workpiece spindle motor: 0.55 kW MACHINE DETAILS Weight: 3600 kg EQUIPMENT - Machine completely repaired and checked + painting work - DC motor - Fully automatic work cycle with feed movement via wind rose switch for rapid forward, rapid reverse, grinding operation, feed stop and µm feed - Automatic longitudinal grinding cycle - Central coolant supply for all grinding points - Workpiece headstock with continuously adjustable drive with rotating and lockable spindle - Feed control for longitudinal grinding and plunge grinding with input for retrieval, feed amounts, feeds, spark-out times and idle strokes - Air cushion-supported adjustment of the grinding headstock

Condition: good (used), Year of construction: 2006, operating hours: 10,000 h, Functionality: fully functional, turning diameter: 310 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: FANUC, TECHNICAL DETAILS Control: FANUC Dkelqxsvyh Haelg Tjl Max. spindle speed: 4,500 rpm Tool turret: 12-way Tailstock: available EQUIPMENT Parts catcher: with box Chip conveyor: available Chuck: Schunk wedge bar chuck Interface: bar loader interface

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions Delqov E Hz Hjxlg Tekl NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: excellent (used), Year of construction: 2016, operating hours: 8,732 h, Functionality: fully functional, machine/vehicle number: 90-12-19-00, laser power: 95 W, laser wavelength: 1,064 nm, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis: 300 mm Y-axis: 300 mm Z-axis: 500 mm B-axis: ± 120° C-axis: 360° TruPulse 103 laser parameters Laser power on the workpiece: 95 W Max. Pulse peak power: 5 kW Beam quality: 12 mm-mrad Wavelength: 1,064 nm Pulse duration: 0.3 ms - 50 ms Max. Pulse repetition frequency: 833 Hz Max. Pulse energy: 30 J Min. diameter of laser light cable: 300 µm Type of laser light cable: LLK-B Max. Axis speeds Axis speed parallel to axis in X: max. 6 m/min Axle speed parallel to axis in Y: max. 6 m/min Axis speed parallel to axis in Z: max. 6 m/min Simultaneous axis speed: max. 10 m/min Axis speed B-axis: max. 15 1/min Positioning accuracy Linear axes (X, Y, Z): 0.1 mm Rotary axes (B): 0.1° Repeat accuracy Linear axes: 0.03 mm Rotation axes B, C: 0.03° Work table clamping surface X-Y cross table: 390 mm x 300 mm T-slots basic table: 600 mm x 375 mm Rotary axis C125 Turntable diameter: 125 mm Diameter center passage: 61 mm Speed: 200 1/min, 150 1/min Positioning accuracy: 0.2° Mass moment of inertia: 0.02 kg-m², 0.04 kg-m² MACHINE DETAILS CNC control: TRUMPF control system based on a B&R control system Ambient temperature: 5°C - 43°C Connection and consumption Electrical connection (voltage): 380 V - 460 V Electrical connection (frequency): 50 Hz - 60 Hz Type. Power consumption at rated output: 3.8 kW Cooling: Water-water Design Dimensions (W x H x D): 980 mm x 1,220 mm x 505 mm Weight: 230 kg Max. Max. number of laser light cables: 3 Protection class (water cooling): IP54 Ambient temperature (water cooling): 10°C - 40°C EQUIPMENT - TruPulse 103 Dolqouwrz Tjxlg Tskl - Rotary axis C125 with rotary feed-through - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Parts removal - Status ramp - Line laser - Counter spindle prepared for pneumatic chuck - Large number of driven tool holders - Large number of fixed tool holders

Condition: reconditioned (used), Year of construction: 2010, Functionality: fully functional, edge thickness (max.): 8 mm, product height (max.): 60 mm, product height (min.): 6 mm, product length (min.): 180 mm, product width (min.): 60 mm, TECHNICAL DETAILS Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Feed speed: infinitely variable 10 - 18 m/min Control: Edge Control 19 Screen: 18.5" touchscreen color screen Milling and processing units Joining milling unit: 1802 Edge feed: 1901 Glue application station: cartridge 1906MG, sensing nozzle, with automatic glue height adjustment Printing unit: 1913 pneumatic Cutting unit: 1918 Multifunctional milling unit: 1826 MOT 6 with 6 servo axes for flush, radius and chamfer milling Copy milling unit: 1983 Radius scraper unit: incl. pneumatic adjustment 1929 Surface scraper: 1964 MACHINE DETAILS Total length: 5,195 mm Weight: approx. 2,200 kg Extraction connection: 180 + 80 mm, 2,100 m³/h Compressed air connection: 6 bar / 327 NL/min EQUIPMENT - Jointing milling unit 1802 - Edge feeder 1901 - Glue application station cartridge 1906MG with tactile nozzle and automatic glue height adjustment - Pneumatic printing unit 1913 Dkjlovzx R Eoqxlg Tsl - Trimming unit 1918 - Multifunctional milling unit 1826 MOT 6 with 6 servo axes for flush, radius and chamfer milling - Copy milling unit 1983 - Radius scraper unit 1929 including pneumatic adjustment - surface scraper 1964

Condition: good (used), Year of construction: 1995, operating hours: 18,000 h, Functionality: fully functional, overall weight: 6,500 kg, rotor diameter: 370 mm, rotational speed (max.): 118 rpm, filling opening width: 2,500 mm, filling opening length: 1,450 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DATA Inlet length: 1,450 mm Inlet width and rotor length: 2,500 mm Djlqev Rdz Isxlg Tokl Screen size: 30 mm Rotor Diameter: 370 mm Number of blades: 71 (40 × 40 mm) Speed: 118 rpm Drive Motor power: 75 kW Voltage: 400 V Frequency: 50 Hz MACHINE DETAILS Weight: 9,000 kg

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 551739, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc automation FastLoad FastLoad loading system Special feature: Fully contained in the machine casing Area of application: Automation solution for low production volumes Access: Operator access from the front of the machine Grip set: One set for the entire diameter range Space requirement: Does not increase the machine footprint TECHNICAL DETAILS Peak power grinding spindle: 9.5 kW Directly driven grinding spindle: yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Axes X-axis: 384 mm Y-axis: 317 mm Dkslqxlgjv Ednqj Tel Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Charging time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Measurement of the tool profile: directly on the machine without removing the tool MACHINE DETAILS Machine base made of polymer concrete: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 14.5 kVA EQUIPMENT - Measuring probe on the grinding head - Possibility of direct tool profile measurement - Machine base made of polymer concrete

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 27578101, travel distance X-axis: 600 mm, travel distance Y-axis: 250 mm, controller model: SIEMENS 840C, number of slots in tool magazine: 90, HIGHLIGHTS Dslqxlovygxheg Tjkl - Machine with Promot portal loader - completely overhauled 10 years ago TECHNICAL DATA Control: SIEMENS 840C Tool magazine: 90 places Equipment: turret and sub-spindle

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Center distance: 900 mm Travel paths Turret slide 1 (XYZ): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (XYZ): 165 / 420 mm Turret slide 3 (XYZ): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT Djlqov E Hk Ijxlg Tskl - Y-axis - Driven tools - Chip conveyor - Top XF 375 bar loader (BX06121026), built in 2007 Tools and clamping devices are not included

Condition: ready for operation (used), Year of construction: 1998, operating hours: 19,162 h, Functionality: fully functional, machine/vehicle number: 1108 000002 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Dolqxlgsv Exhxj Tekl Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 24,220 h Spindle hours: 19,162 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, product height (max.): 50 mm, product height (min.): 6 mm, product length (min.): 180 mm, product width (min.): 60 mm, TECHNICAL DETAILS Workpiece thickness: min. 6 mm / max. 50 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Edging thickness depending on equipment: 0.4 - 5 mm Edging height max.: 55 mm Edging length strips: min. 350 mm Edging overhang/height per side: max. 3 mm Feed speed Feed speed: 12.5 m/min Extraction Joining milling unit Extraction volume flow: 900 m³/h Milling unit Extraction volume flow: 280 m³/h Scraping unit Extraction volume flow: 280 m³/h Static negative pressure of joining milling unit: 1,490 Pa Static negative pressure of milling unit: 1,650 Pa Minimum air speed: 20 m/s Joining milling unit Connection diameter: 70 mm Scraping blade connection diameter: 70 mm MACHINE DETAILS Total length: 5,291 mm Compressed air: 6 bar EQUIPMENT - Infeed ruler manually adjustable - Milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with tactile nozzle - Pressure unit 1816 pneumatic - Trimming unit 1918 - Milling unit 1942 M radius, bevel, flush - Blow nozzle complete - Scraping blade unit 1929 - Chip collection box - Surface scraping blade 1964 - Extractor hood set Dkjlqxlgovzx I De Tsl - Protective hoods complete

Condition: refurbished (used), Year of construction: 1995, Functionality: fully functional, rotor diameter: 370 mm, rotational speed (max.): 118 rpm, filling opening width: 1,600 mm, filling opening length: 2,000 mm, TECHNICAL DATA Inlet length: 2,000 mm Inlet width and rotor length: 1,600 mm Screen size: 30 mm Rotor Diameter: 370 mm Number of blades: 42 (40 × 40 mm) Speed: 118 rpm Drive Motor power: 75 kW Voltage: 400 V Dkeljv Rdr Tsqxlg Tjl Frequency: 50 Hz EQUIPMENT - Feed hopper - Steel beam - Electrical control panel

Condition: excellent (used), Year of construction: 2006, operating hours: 8,582 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 510 mm, controller model: FANUC 21iMB mit Manual Guide i, coolant supply: 20 bar, Equipment: chip conveyor, TECHNICAL DETAILS Machine type: VICTOR VC70 milling machine Control: FANUC 21iMB with Manual Guide i Travel path X: 700 mm Travel path Y: 480 mm Travel path Z: 510 mm Spindle speed: 8,000 rpm IKZ (internal coolant supply): 20 bar Tool holder: SK40 Dkelqxlevygpmeg Tsl Tool magazine: 24 spaces MACHINE DETAILS Part counter: 34,294 pieces Control switch-on time: 54,559 h Program run: 8,582 h Feed time: 11,150 h EQUIPMENT - INDUNORM automation cabinet - Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, operating hours: 17,785 h, Functionality: fully functional, machine/vehicle number: 1108 000006 3, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-travel: 600 mm Y-travel: 525 mm Z-travel: 500 mm Control system: HEIDENHAIN Head swivels: ±90° Work table Table clamping area: 1,000 x 543 mm Table load: max. 350 kg Spindle Spindle mount: SK 40 Standard: DIN 69871 Spindle speeds (infinitely variable): 20 - 12,000 rpm Feeds and rapid traverse Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min MACHINE DETAILS Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Coolant system: yes On time: 18,534 h Dkolqxlgov Exgzs Tol Spindle hours: 17,785 h Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 570 023 4, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, table width: 500 mm, table length: 700 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Work table length: 700 mm Dkjlqxev Exdmolg Tol Work table width: 500 mm Spindle Spindle speed (min.): 20 rpm Spindle speed (max.): 12,000 rpm Spindle motor power: 25,000 W Rapid traverse speed & feed rate X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min X-axis feed rate: 10 m/min Y-axis feed rate: 10 m/min Z-axis feed rate: 10 m/min MACHINE DETAILS Total height: 3,300 mm Total length: 4,600 mm Total width: 5,500 mm Total weight: 6,000 kg Input voltage: 400 V Type of input current: three-phase Any vices, tool holders and chucks shown are not part of the scope of delivery!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 97,307 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection weight: 94 g, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Injection unit - plasticizing cylinder: B Screw diameter: 30 mm L/D ratio: 20 Dslqxlev Exblsg Tokl Specific injection pressure: 1,995 bar Displacement volume: 106.0 cm³ Injected part weight (PS): 94 g Max. dosing path: 150 mm Max. nozzle path: 200 mm Nozzle immersion depth (SVO): 40 mm Nozzle contact force: 60 kN Installed cylinder heating: 8.3 kW Filling hopper capacity: 35 L Total machine Oil tank capacity: 180 l Pump unit: 22.0 kW Installed total power: 30.3 kW Dry cycle rate according to EUROMAP 6a: 1.92 s - 259 mm Noise level (unpressurized circulation): 57.0 dB (AS) Noise level (power): 71.0 dB (AS) Switch-on time: 97,307 h Cylinder heating: 55,786 h Machine cycles: 3,160,294 Any visible vices, tool holders and chucks are not part of the scope of delivery!

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Travel paths X - Y - Z: 1,100 - 610 - 810 mm CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers Dslqxljv Ew T Hjg Tjkl - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!