Second-hand machinery for sale (2,392)

Condition: used, Year of construction: 2020, machine/vehicle number: 108CM00772, with hydraulic clamping, coolant device and roller conveyor feed, length: approx. 6000 mm Coliowdbtyom Ttyegt

Condition: used, Year of construction: 2015, machine/vehicle number: 917, 5-Axis CNC Gantry Milling Machine HG GRIMME SysTech GmbH G-DT-F 12/10 SB Machine Data Year of Manufacture: 2015 Serial Number: 917 Operating Hours: 12,613 h External Dimensions: 6,382 x 3,568 x 3,180 mm (L x W x H) Workpiece Material: Plastic Workpiece Size: Max. 1,200 x 1,000 x 400 mm (L x W x H) Travel Paths: X = 1,800 mm, Y = 1,600 mm, Z = 815 mm, C = +365°/-95°, A = +/-181° Electrical Data Voltage: 230/400 V Cgslijwfid Nem Ttyst Power: 24.5 kW Frequency: 50 Hz Milling spindle Manufacturer: Jäger Type: Z80-K530.04 Tool holder: WK25 Power: 4.6 kW Speed: max. 30,000 Balancing: Quality level Q < 0.4 Control system Manufacturer: SIEMENS Type: SINUMERIK 840D sl Operator panel: OP 10 C Note: This is a starting price. The sale will be made via an online auction to the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: used, 30A, 3x230V, cables included Cjljwdh H Tjim Ttysgt

Condition: used, X/Y/Z 800/800/1,000mm, B-axis 360degrees / support circle 900mm, A-axis 270degrees, clamping plate 460x460mm, spindle 18,000rpm, feed X/Y/Z 60m/min, max. tool weight 12kg, 52-pos tool magazine, CNC SIEMENS SINUMERIK 840D sl, 400V 50Hz 31kVA, LxWxH, approx. 6,100x2,000x3,500mm, weight, approx. 12to the indicated price corresponds to the starting bid! hammer price plus 18% buyer's premium, plus 20% VAT, plus handling fee Cgelimovf En Ee Ttyst

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 1102-139, turning diameter over bed slide: 930 mm, turning length: 2,000 mm, spindle speed (max.): 710 rpm, torque: 8,500 Nm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: conventional Working area Turning diameter over bed: 930 mm Turning diameter over support: 630 mm Turning length: 2,000 mm Center height over bed: 465 mm Spindle Spindle bore: 95 mm Cslim Tswfhbaetysgt Speeds: 7 - 710 rpm Torque: max. 8,500 Nm Adapters and accessories Faceplate diameter: 800 mm Chuck diameter: 400 mm MACHINE DETAILS Machine weight: approx. 8,600 kg EQUIPMENT - 1 steady rest

Condition: used, Year of construction: 2001, Gildemeister CTX-400 ST CNC Lathe. Serial No. 01160012621 (2001) Cgelim Tjwakqtjtyot Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2001, Travels: X-axis: 1000 mm, Y-axis: 500 mm, Z-axis: 425 mm, table dimensions: 1000x500 mm, with fleece filter system Cjljwdbtteim Ttyegt

Condition: used, Year of construction: 2017, machine/vehicle number: 4445, REICHENBACHER ECO-RS III DUO 5-Axis CNC Machining Center Machine Data Year of Manufacture: 2017 Machine No.: 4445 Operating Hours Spindle 1: 7,685 h Colim Towfid Aetysgt Operating Hours Spindle 2: 7,098 h Footprint: X = approx. 5.8 m, Y = approx. 3.6 m, Z = approx. 3 m Machine Weight: approx. 15 t (with control cabinet, without auxiliary units) Rated Power: 7 kW (S1 operation), constant from 12,000 - 40,000 rpm Speed: 1,000 - 40,000 rpm, clockwise/anticlockwise rotation Travels: X = 2,320 mm, Y = 1,980 mm, Z = 860 mm Tool Holder: HSK-40 Tool Length: max. 270 mm from spindle nose Tool diameter: max. 40 mm Saw blade diameter: max. 240 mm Control system Manufacturer: SIEMENS Type: SINUMERIK 840D Solution Line CNC control: NCU 720.3B Note: This is a starting price. The sale will be conducted via an online auction against the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: used, type: Ariane 8060, built: 2003, mobile, total length: 3m Celim Ttowdh H Hsysgt

Condition: used, Year of construction: 2004, DMG DMC 1035V Vertical Machining Centre with Heidenhain iTNC-530 Control. Serial No. 28860011522 (2004), Table Size 1200 x 600mm, 24 Position ATC, Spindle Taper CAT40 Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Celim Ttswakmnsyogt

Condition: used, machine/vehicle number: TS2510341-2020, Year of construction: 2020, fuel type: gas, Max. load capacity: 3500 kg, dead weight: 6115 kg, with digital weighing unit Colim Ttewdbt Hsyegt

Condition: used, Year of construction: 2016, machine/vehicle number: 4417, REICHENBACHER ECO-RS III DUO 5-Axis CNC Machining Center Machine Data Year of Manufacture: 2016 Machine No.: 4417 Operating Hours Spindle 1: 10,960 h Operating Hours Spindle 2: 11,454 h Footprint: X = approx. 5.8 m, Y = approx. 3.6 m, Z = approx. 3 m Machine Weight: approx. 15 t (with control cabinet, without auxiliary units) Rated Power: 7 kW (S1 operation), constant from 12,000 - 40,000 rpm Speed: 1,000 - 40,000 rpm, forward/reverse rotation Travels: X = 2,320 mm, Y = 1,980 mm, Z = 860 mm Tool Holder: HSK-40 Tool Length: max. 270 mm from spindle nose Tool diameter: max. 40 mm Saw blade diameter: max. 240 mm Control system Cslimjwfidve Ttyjgt Manufacturer: SIEMENS Type: SINUMERIK 840D Solution Line CNC control: NCU 720.3B Note: This is a starting price. The sale will be conducted via an online auction against the highest bidder (plus premium and VAT). Please follow the link for further information and photos of this lot.

Condition: used, total length: 6m Celimowdh Hys Ttysgt

Condition: used, Year of construction: 2015, machine/vehicle number: 12430004503, With CNC control, manufacturer: HEIDENAIN, type: TNC640, travels: X-axis: 750 mm, Y-axis: 650 mm, Z-axis: 560 mm, table diameter: 650 mm, dimensions: 800 x 650 mm, max. 18,000 rpm, with automatic tool changer, with 60 tool positions, tool holder: SK40-HSK63-BT40-CRT40, internal cooling system, fleece filter system, manufacturer: BMF, and chip conveyor Celim Tswdbq Setyegt

Condition: used, total length: 6m Cslim Ttowdh Hteysgt

Condition: used, Year of construction: 2014, machine/vehicle number: S0320111051, Table diameter: 914 mm, with 3 workstations, with coolant device Cslim Ttjwdbudsyegt

Condition: used, total length: 6m Cslim Towdh Hmstyegt

Condition: used, Year of construction: 2020, Travels: X-axis: 1500 mm, Y-axis: 500 mm, Z-axis: 425 mm, with magnetic clamping plate, size: approx. 1500 x 500 mm, CNC control, make GEIBEL & HOTZ, separate control/switch cabinet system, make RITTAL and oil mist extraction, make HERR Cslim Tjwdbqxstyegt

Condition: used, total length: 6m Colswdh Hgsim Ttyjgt

Condition: used, machine/vehicle number: 7231, with pivoting magnetic clamping plate, size: approx. 1000x300 mm Colim Towdbtmjtysgt

Condition: used, total length: 6m Cgolijwdh Haem Ttyot

Condition: used, type: 700A, 380v Cgeliowdh E Njm Ttyet

Condition: used, type: 45-2, built in: 1991, total dimensions: 10.5m x 1.50m Cgolim Tjwdh E Aetyjt

Condition: used, type: CE1000-2, built in: 2020, total dimensions: 3.5m x 2m Celjwdh Evjim Ttyogt

Condition: used, type: Commercial 106, including Full space punching plates and metal racks, platform and 2 metal cabinets accessories. (incl. automatic waste removal via conveyor belt), 6mx2.5m (without platform), 400V, year of manufacture: 2008 Cslim Towdh Epjtysgt