Used Dts for sale (132)

Condition: excellent (used), DTS Elevator screw conveyor Nwjdpfx Aspta S Hsd Hjp Stainless elevator screw conveyor, elevates from 400mm to 1900mm, screw diameter 280mm, overall length 5000mm, top mounted water spray jets, 3Ph

Condition: excellent (used), Blancher Pos. number: LTC00006401 Make: DTS Type: automatic direct steam heated full water screw blancher Model: 2004 Capacity: Ø = 800 mm x L = 3.660 mm Volume: ± 1.800 litre Input height: 1.650 mm Dimensions: L x W x H = 4.850 x 1.950 x 1.800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 3,0 kW Steam: 4 bar Features: stainless steel landing overflow sieve with collection tank for blanched water including steam injection temperature controlled with circulation pump mechanical motor gearbox This is linked with Nwjdpfxehbvmuo Ad Hop Cooler Pos. number: LTC00006331 Make: Lubot / Wakker Type: automatic screw cooler Model: 2004 Capacity: Ø = 500 mm x L = 3.000 mm Volume: ± 600 litre Output: 850 mm Dimensions: L x W x H = 3900 x 1000 x 1800 mm Frame: stainless steel Power supply: 400 Volt – 50 Hz – 0,55 kW Features: mechanical variator as-is or tested and set to customer needs

Year of construction: 2018, condition: excellent (used), DTS Stainless Steel Screw Cooler 01.400x600, serial no. 18028/01, year of manufacture 2018, with screw auger delivery and with a heat exchanger DTS Stainless Steel Screw Auger, with Mida Soak chemical injection DTS Stainless Steel Screw Auger Conveyor, with cooling water tank Nwjdpfx Adot Swbas Hjp

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Nwedpfx Aowp E Ncsd Hep Width 2000 mm Height 295 mm Number of T-slots 4 T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Nwedpfsxvcmvox Ad Hep

Condition: used, Year of construction: 2015, 2015 | Fliegl DTS 300 | Used Low Bed Semi-trailer 📍Location: Austria, Eberdorf 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nedpsxxnb Refx Ad Hjwp 👷‍♂️ Inspected by an independent expert 13 inspection points 13 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fresh Austrian road allowance, nice condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39628 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, maximum load weight: 15,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 09/2015, Subject to errors and prior sale! Internal number: 1460. 1004657----* Trailer for truck Fliegl DTS 300 with offset * HSN / TSN 7591 11A 000 * Color: matt black * Empty weight (kg) 8,300 * Gross vehicle weight (kg) 24,000 * Payload (kg) 15,700 * Body type: low loader ----The vehicle is unprepared! Nsdpfx Adov Tg Hxo Hjwp Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, functionality: fully functional, Year of construction: 2025, machine/vehicle number: SN076364, 12 months warranty, engine excluded. Minor signs of use. Nedpfxoxvqqis Ad Hswp

Condition: new, machine/vehicle number: f8fb99947a1c19bc4d63549ff, empty load weight: 6 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of front lashing eyes recessed on offset, 5 tons each 7 pairs of lashing rings at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion with M&S marking Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom (to prevent the ramps from slipping sideways, not in conjunction with hydraulic side ramp displacement) covered with wood with spring lift support Nwodpfxji Riwfs Ad Hep Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Coun

Condition: new, empty load weight: 6,060 kg, maximum load weight: 17,940 kg, overall weight: 24,000 kg, axle configuration: 3 axles, color: silver, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, beacon, 3 axles, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, 2-part loading ramps, mechanical ramps, extendable drawbar, side aluminium underrun protection, twin tyres, EBS. Body: Loading length approx. 8.5m, extendable to 3.05m. Demonstration vehicle! Parabolic suspension with axle compensation at the rear, 3x 10t SAF axles, permissible gross weight up to 30t, drawbar adjustable in length. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Nwodpfxsxbttqo Ad Hep

Condition: ready for operation (used), Year of construction: 2002, Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible. Nwjdpfeuh Azvjx Ad Hep

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imager and UV LED exposure cabinet. Devices from mid-2022. 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Date of manufacture: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum Nwedpfx Adjxb Ru Es Hjp • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 04560 03/129 • Date of manufacture: 05/2022 3. RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco, Knorr or Haldex Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Nodoi Ri Dlepfx Ad Hswp Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Hydraulic via tractor power take-off with throttle, actuation on the left side in FR Hydraulic connection with SVK plug NW 10/3, incl. connection hose Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Nsdpsi Ri Ddofx Ad Hswp Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flapsAnti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Extensions extendable to 3,000 mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes (40 lashing options) 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Country of registration / plates Country of registration: Germany 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Warning sign according to ECE - 70 Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's discretion Drive-on ramps Hot-dip galvanized Attention! These are archive pictures!

Condition: new, machine/vehicle number: 2dff0c136c85096f36822a0bb, empty load weight: 7,150 kg, maximum load weight: 16,850 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 3 pairs of lashing points each 10 to integrated in the floor at the front 6 pairs of lashing points at the top and sides, each 10 tons, integrated in the outer frame 1 x to the neck area remaining distributed in between Spacing not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included in the scope of delivery) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation axle load compensation (rocker compensation) Nwsdpfx Adsi Riy Ee Hjp Brake system 2-line compressed air brake system Colored line routing for easy servicing. Spring-loaded parking brake Incl. 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, then with 70 mm softwood floor, steel/checker plate flooring in the wheel housing area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 8,200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Covered with wood Incl. with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for two-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, at the manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) Nsdpei Ri Rysfx Ad Howp 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Njdpfx Adei Ri Rvj Hswp Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: like new (used), Year of construction: 2004, functionality: fully functional, Equipment: type plate available, Professionele Coenraadts eibreekmachine – Type CEB 432 (ei-breker) + CAL 216-2 (lader) + CAS432 (scanner) Nwjdpfx Ajxak N Tjd Hsp Te koop: een industriële eibreekmachine van het merk Coenraadts, type CEB 432 + CAL 216-2 + CAS 432 Deze machine is speciaal ontworpen voor het efficiënt breken en verwerken van eieren in grootschalige productieomgevingen, zoals eiverwerkende bedrijven en voedingsmiddelenfabrieken. ⸻ Specificaties: • Type: Coenraadts CEB 432 (ei-breker) + CAL 216-2 (lader) + CAS432 (scanner) • Capaciteit: maximaal 43.200 eieren per uur • Elektriciteit: 3-fase 400V + N + PE, 2,16 kW • Luchtverbruik: 600 L/min bij 5-6 bar • Koud water: 1 L/min ⸻ Kenmerken: • Hoogwaardige RVS constructie – hygiënisch en eenvoudig schoon te maken • Voorzien van toevoerband en separatie-unit (eiwit/eidooier) • Industriële kwaliteit – gebouwd voor continue productie • Compleet met diverse aansluitingen en bedieningspanelen • Machine is nog in zeer nette staat en heeft weinig geleden, compleet aanwezig ⸻ Toepassing: Deze machine is uitermate geschikt voor bedrijven die liquid egg producten produceren (eiwit, eidooier, heel ei) voor bakkerijen, voedingsindustrie of verdere verwerking. 📞 Bij interesse of vragen neem gerust contact op via Marktplaats-berichten. Nieuwprijs: €360.000 Vraagprijs: €110.000

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Njdpoxy Ng Rsfx Ad Howp Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. Nwjdpfx Aexxyigjd Hjp The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: used, mileage: 104,313 km, power: 130 kW (176.75 HP), first registration: 01/2009, overall weight: 10,500 kg, fuel type: diesel, color: silver, maximum load weight: 3,810 kg, empty load weight: 6,690 kg, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro4, suspension: other, Year of construction: 2009, total length: 5,880 mm, construction height: 2,900 mm, ENGINE DAMAGE!!! The Mercedes-Benz Atego 1018 right-hand drive Schmidt SK 500 R is a used sweeper with a Euro 4 diesel engine. The vehicle has engine damage. With an output of 130 kW (177 hp) and a displacement of 4,249 cc, this Atego is suitable for demanding cleaning operations. The sweeper was first registered on January 21, 2009 and has a Njdpfjvmt E Iex Ad Howp mileage of 104,313 km. With a permissible total weight of 10,500 kg, it is designed for professional use. The dimensions are 2,900 mm in height, 2,500 mm in width and 5,880 mm in length. A rear-view camera makes maneuvering easier. Suitable for sale to tradespeople or for export, this vehicle is a used but specialized option for companies that require a sweeper with extensive functions. Viewings are possible without registration. Sale only to tradespeople (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 3,665 km, power: 46 kW (62.54 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 2,250 mm, overall weight: 4,200 kg, first registration: 02/1981, color: orange, driver cabin: day cab, tire size: 340/80 R18, Equipment: additional headlights, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, shortcut: House, rear window, 6-speed switch, differential lock, work lights, beacon, leaf spring suspension Nwsdowzbzfepfx Ad Hep Wheelbase: 2250 mm Superstructure: Schmidt snow blower VF1B with Mercedes-Benz auxiliary engine 115 kW – drive engine for the blower mounted on the loading platform, DB 115 kW OM 352A! Former municipal vehicle from Rottach-Eggern! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to modifications, prior sale, and errors!

Condition: used, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/1992, Year of construction: 1992, Internal vehicle number: G200183 German vehicle At our yard in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English)   Unladen weight 7,300 kg Gross vehicle weight 35,000 kg   Subject to errors   We are happy to accept your used vehicle in trade. Financing available directly with us in-house. GOLEC COMMERCIAL VEHICLES GMBH Nwjdpfx Adswcuzne Hep We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Condition: used, Year of construction: 1997, Set of devices used in the production of carbonated beverages with the addition of syrups, such as orangeade. The set includes: - 2000 L tanks x 3 pcs - 2000 L tanks with agitator x 2 pcs - SCHMIDT Sigma MK27 pasteurizer - Tank with agitator - Installation kit with control cabinet Model: OST/WEST Q3000l/h Capacity: 3000 L/h Year of production: 1997 Nwjdeubykuepfx Ad Hsp Condition: used

Condition: good (used), Year of construction: 2001, Air-operated airless pump on a pump trolley The T2001 piston pumps are robustly constructed air-operated airless pumps designed for conveying, transferring, and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE, or PE. ATX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during pumping and spraying - Versatile thanks to stainless steel, carbide, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning thanks to the self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction head (empty pump): 1.5 mWS Suction head (filled pump): 6.5 mWS Material temperature: +10 to +85 °C Maximum stroke rate (short): 50 cycles/min Maximum stroke rate (continuous): 20 cycles/min Maximum material pressure: 6 bar Transmission ratio: 60:1 Nwjdpfx Adjrt Uy Ns Hsp Volume per cycle: 270 cc Maximum operating pressure: 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4" Material outlet: G3/8" Material inlet: G1" Weight: 45 kg Customs tariff number 8424 8970 Year of manufacture: 2001 New price: €13,600 incl. VAT. You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!