Second-hand machinery for sale (2,359)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, The machine has been inspected by used machine experts and is in excellent condition. Machine was recalibrated in 2021! Multi-sensor capability allows to work with the following probes: Scanning probe ZEISS VAST-XXT, Viscan, DTS, LineScan, RST-P and RENISHAW SP25, TP2, TP6, TP20 and TP200. TECHNICAL DETAILS Travel of the axes: 3000 x 1200 x 1000 mm Table material: granite structure Automatic birotative head: RDS 2.5º x 2.5º x 2.5° Software: Calypso 5.6 (included in purchase) Dob Eot Di Trjdym Dout Machine accuracies: PE_E=(3.2+L/250) μm / MPE_P=3.0 μm / MPE_THP=4.0 μm.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Djb Eovpg T Djdym Dout Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar MACHINE DETAILS Rated power of the pump motor: 15 kW Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Condition: excellent (used), Functionality: fully functional, Year of construction: 2005, operating hours: 7,160 h, A 5-ton forklift is available for loading the machine parts. TECHNICAL DETAILS X-axis: movable support with gantry drive on both sides Y-axis: movable carriage on the X-support Z-axis: mounted on Y-slide, auto-stop in case of voltage drop Travel X / Y / Z: 3,600 / 1,800 / 1,200 mm Cube dimension (5-sided machining): 3,020 / 1,220 / 910 mm B-axis: ± 135° C-axis: ± 270° Spindle speed: 3,000 - 27,000 rpm Control: OSAI S10 510s Spindle power: 6 kW from 18,000 rpm Tool holder: ISO 30 Collet chuck; type ETS 25 for shank diameter of 16 mm Tool magazine: 8 stations, traveling Table surface: 3,670 x 1,355 mm Positioning accuracy X / Y / Z: 0.1 mm Repeat accuracy X / Y / Z: 0.05 mm Positioning accuracy C / B: 30 arcsec Repeat accuracy C / B: 22 arcsec Rapid traverse X / Y / Z: 80 / 80 / 70 m/min Rapid traverse: B / C: 25 rpm MACHINE DETAILS Connected load: 25 kVA Supply voltage: 400 V ± 5%, 50 Hz ± 5% Total weight: 7.5 t EQUIPMENT - Liquid cooling by means of cooling unit - Control panel Dsb Edyjtxxw Dom Djut - Dynamic tool control software - CMS portable control keyboard - Teach-in system: joystick - Teach-in software: Power arm for recording points on sample pieces in order to generate machining paths from them - Vacuum system - Compressed air system - Suction connection - Central lubrication

Condition: good (used), operating hours: 6,300 h, Functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Machine comes from renowned medical technology company Dob Edsu T Rcrsym Djut TECHNICAL DETAILS Control system: Siemens X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Table size: 1,200 x 560 mm Max. Table load: 1,000 kg Spindle hours: approx. 6,300 h Spindle Speed range: 20 - 12,000 rpm Interface: SK 40 Tool changer Capacity: 30 tools EQUIPMENT - Infrared sensor - IKZ (internal coolant supply) - Chip conveyor - Rinsing gun - Signal lamp - Suction unit - Preparation for 4th axis - Cabin roof

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, sheet thickness steel (max.): 20 mm, cutting length (max.): 4,080 mm, overall weight: 29,000 kg, The machine is supplied EXW free on board. TECHNICAL DETAILS General information: Year of construction: 2013 Control system: Dt-7 Touch Cutting capacity: Cutting capacity: 20 mm in St 45-60 Dusb Edyou N Id Iom Det Cutting length: 4,080 mm Cutting angle: 0°30' - 2°30' Working parameters: Number of strokes per minute: 4 - 8 Stroke: 290 mm Dimensions: Machine length: 5,900 mm Machine width: 3,800 mm Machine height: 2,950 mm Machine weight: 29,000 kg Oil system: Oil tank capacity: 500 l Power and energy: Motor power: 45 kW Connected load: 100 A Special features: Removal option: Small parts can be removed from the front. Condition: Very good condition, fully functional Documentation: All documents are available

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, operating hours: 29,623 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Load center of gravity: 600 mm Lifting height: 5,500 mm Free lift: 2,800 mm Mast type: Duplex Fork length: 1,400 mm Djb Edymeuh Ucls Deut MACHINE DETAILS Length: 4,850 mm Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,200 mm, table load: 2,000 kg, rotational speed (max.): 4,000 rpm, controller manufacturer: Heidenhain, controller model: TNC i530, Machine has been overhauled by technical experts for used milling machines CME. TECHNICAL DETAILS Travel: 1200 x 750 x 750 mm Working speed: 20 m/min Rapid traverse: 30 m/min Speed: 4,000 rpm Control: Heidenhain TNC i530 Table size: 1300 x 700 mm Table load: 2 t Fixture: ISO-40 Power: 28 kW Duobst Di Tfo Edym Det EQUIPMENT - Electronic handwheel - chip conveyor Machine is in very good condition and ready for immediate commissioning.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 8M2807A, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection pressure: 1,389 bar, injection weight: 6,098 g, TECHNICAL DETAILS Mold clamping force: 8,000 kN Dusbsvpg Nfe Edym Djt Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T33100-0636, Year of construction: 1996, operating hours: 21,419 h, load capacity: 16,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 3,650 mm, TECHNICAL DETAILS Machine type: Diesel forklift Load center: 900 mm Load capacity: 16,000 kg Mast and fork Mast type: Standard Lifting height: 3,700 mm Fork length: 2,180 mm Fork width: 350 mm Fork thickness: 75 mm Fork carriage width: 2,500 mm Tires Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 Dsb Edymoulyhpe Deut MACHINE DETAILS Drive type: Diesel Overall length: 5,200 mm Overall width: 2,550 mm Overall height: 3,650 mm Net weight: 22,220 kg EQUIPMENT - Heating system - Full cabin

Condition: good (used), Year of construction: 1999, Functionality: fully functional, feed length X-axis: 200 mm, feed length Z-axis: 675 mm, bed width: 300 mm, rotational speed (max.): 4,000 rpm, TECHNICAL DETAILS Control: Heidenhain Manual Plus cycle control Handwheel: Electronic handwheel Travels X-path: 200 mm Dusb Edou T Hx Neym Djt Z-path: 675 mm Machining area Bed width: 300 mm Spindle speed: 4,000 rpm Tool system Turret: 8-fold EQUIPMENT - Movable control panel - Half cabin - Work area lighting - Chip tray with coolant device under the machine bed - Free-standing switch cabinet - Automatic central lubrication - Monitored work area safety doors - Collet chuck - Manual gear range selection in 3 stages

Condition: excellent (used), Year of construction: 2004, operating hours: 12,464 h, Functionality: fully functional, machine/vehicle number: 29100003782, travel distance X-axis: 640 mm, controller manufacturer: Siemens, controller model: Sinumerik 810 D, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, Reconditioned by technical experts for used DMG-Mori machining centers. TECHNICAL DETAILS Travel X / Y / Z: 640 / 600 / 500 mm table: 850 x 600 mm Dueb Eet Di Ntodym Det Table load: max. 600 kg Speed: 18,000 rpm Rapid traverse X / Y / Z: 70 / 40 / 40 m/min Tool changer: 30 positions, ISO 40 Control: Siemens 810 D MACHINE DETAILS Internal cooling: 40 bar EQUIPMENT - Tool measuring device

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 61009829, clamping force: 8,000 kN, screw diameter: 135 mm, clearance between the columns: 1,120 mm, injection weight: 6,098 g, ejector force: 200 N, opening stroke: 2,100 mm, TECHNICAL DETAILS Mold clamping force: 8,000 kN Mold opening force: 560 kN Plate dimensions (h x v): 1,600 mm x 1,530 mm Distance between columns (h x v): 1,120 mm x 1,000 mm Mold opening distance: 1,600 mm Mold installation height (min. - max.): 500 mm - 1,100 mm Plate opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Dsbjvpg Iuj Edym Djut Injection system Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection size for PS: 6,098 g Screw speed (standard/optional): 121 rpm / 153 rpm Electrical/hydraulic equipment Nominal pump motor power: 110 kW Installed heating power: 57 kW Number of cylinder heating zones: 7 Number of drying cycles according to Euromap: 965 1/h Oil tank capacity: 1,500 l MACHINE DETAILS Net weight with control cabinet: 45 t Machine dimensions (L x W x H): 10.81 m x 2.92 m x 2.51 m

Condition: excellent (used), Year of construction: 2014, operating hours: 13,175 h, Functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, TECHNICAL DETAILS Control system: SIEMENS SINUMERIK 840 D 3D control system X-travel: 1,150 mm Y-travel: 700 mm Z-travel: 550 mm Djb Edysu T Hp Ism Dout Spindle Speed range: 20-18,000 rpm Interface: SK 40 Operating times Switch-on time: 48,384 hours Spindle hours: 13,175 hours EQUIPMENT - Double gripper device incl. direct manual tool loading into the tool magazine - Infrared measuring probe - Direct stroke measuring system incl. air barrier protection - MPC (machine protection through quick shutdown) - Air blast through the center of the spindle - Internal cooling lubricant supply (IKZ) - Paper belt filter with 40 bar operating pressure - Chip conveyor, bed flushing, cabin roof - Rotating viewing window - Flushing gun for chip flushing - Mechanical oil and emulsion mist separator - Active cooling unit for switch cabinet - No handwheel

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 8,000 kN, screw diameter: 100 mm, injection pressure: 1,613 bar, opening stroke: 1,175 mm, TECHNICAL DETAILS Clamping force: 8,000 kN Opening stroke: 1,175 mm Dueb Edovpg E Tjym Dst Tool height (min./max.): 450 mm - 950 mm Platform distance: 2,125 mm Clearance between columns: 1,310 mm x 1,210 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,613 bar Injection volume: 3,338 cc Weight of PS injection: 3,038 g Weight of PE injection: 2,370 g Plasticizing speed: 190 rpm EQUIPMENT 2 x hydraulic core 2 x air valve Euromap 67 for the robot

Condition: good (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS control: multipulse 64 X-axis: 525 mm Y-axis: 400 mm Z-axis: 375 mm Work table Work table size (L x W): 730 x 630 mm Electrical data Operating voltage: 400 V - 50 Hz Power consumption: 12 A Control voltage: 230 AC / 24 DC Back-up fuse: 25 A Dielectric tank Capacity: 400 l Dusb Edjuqbx Heym Djt MACHINE DETAILS Width: 2,100 mm Depth: 2,450 mm Height: 2,600 mm EQUIPMENT - Machine documentation - Accessories from pictures

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 90859, clamping force: 10,000 kN, screw diameter: 120 mm, clearance between the columns: 1,400 mm, injection pressure: 1,632 bar, plate width: 1,690 mm, plate height: 1,960 mm, TECHNICAL DETAILS Control: UNILOG B4 Clamping force: 10,000 kN Column spacing (h x v): 1,120 mm x 1,400 mm Plate dimensions (h x v): 1,960 mm x 1,690 mm Installation height (min.): 550 mm Dujb Edjvpgxasym Djt Installation height (max.): 1,020 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering of the moving platen (D): 250 mm Centering of the fixed platen (D): 315 mm Injection system Screw diameter: 120 mm Injection volume: 5,655 cc Injection weight: 5,146 g Injection pressure: 1,632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min⁻¹ Screw torque: 11,370 N·m MACHINE DETAILS Machine dimensions (L x W x H): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg EQUIPMENT 2 x core on fixed platen, MOOG control. 2 x pneumatic mold nozzle control on fixed platen. 1 x hydraulic mold nozzle control on fixed platen. 2 x pneumatic blow-off valves on movable platen.

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 34, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 30, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: Fanuc MSG 502 Number of axes: 4 X-axis: 610 mm Y-axis: 760 mm Z-axis: 460 mm Tool system Dob Edymeuqbnne Djut Tool holder: BT 40 Tool changing device: 30 positions Work table Table dimensions: 740 x 550 mm Pallet changer: 2 pieces MACHINE DETAILS Machine weight: 9000 kg Connected load: 44 kVA EQUIPMENT - 3D probe - Internal coolant supply 50 bar - Oil mist lubrication

Condition: good (used), Year of construction: 2001, Functionality: fully functional, clamping force: 12,000 kN, screw diameter: 100 mm, clearance between the columns: 1,200 mm, injection weight: 4,363 g, New machine control Dob Edyjvpgwijm Dout TECHNICAL DETAILS Clamping force: 12,000 kN Distance between columns: 1,200 mm x 1,200 mm Minimum mold height: 500 mm Maximum mold height: 1,695 mm Distance between tables: 2,000 mm Injection unit Screw diameter: 100 mm (barrier screw) Injection volume: 4,800 cm³ Injection weight: 4,363 g Performance Pump motor power: 75 kW Heating power: 70 kW

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Heidenhain TNC 410 Handwheel: Heidenhain Travels X-axis: 600 mm Y-axis: 500 mm Djbjuqbm Dj Edym Dout Z-axis: 450 mm Spindle Max. Speed: 6,300 rpm (with gearbox) Max. Torque: 800 Nm Tool system Tool holders: SK 40 Work table Table size: 530 x 900 mm Machine running time Operating hours: approx. 10,000 h EQUIPMENT - Chip tray - External cooling

Condition: excellent (used), Year of construction: 2000, operating hours: 27,383 h, Functionality: fully functional, grinding length: 1,000 mm, grinding diameter: 350 mm, rotational speed (max.): 3,000 rpm, The machine was thoroughly checked by STUDER. No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: GE Fanuc Series 16-T X-axis: 275 mm Z-axis: 1,050 mm Grinding head Dsbjuqbhnj Edym Djut Rotatable universal sanding head: For external, surface and internal sanding Sanding diameter: 350 mm Table Table load: 130 kg Capacity Max. Revolutions per minute: 3,000 rpm Precision: in the 1 μm range (single part and automatic series production) Machine running time Operating hours: 27,383 h EQUIPMENT - Tailstock - Belt filter system

Condition: used, Year of construction: 1999, Functionality: fully functional, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, workpiece diameter (max.): 570 mm, TECHNICAL DETAILS Control: Heidenhain CNC pilot control Z-axis: 635 mm X-axis: 220 mm Machining area Workpiece diameter: 570 mm Speed range: 25 - 5,000 rpm Tool system Turret: 12-station VDI-30 EQUIPMENT - chip conveyor - Hydraulic 3-jaw chuck - tailstock - bar passage Dujb Edyeuqa Tcjm Dot

Condition: like new (used), Year of construction: 2022, operating hours: 1,300 h, Functionality: fully functional, turning length: 755 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 755 mm, Only 1,300 operating hours - as good as new! TECHNICAL DETAILS V4: turning + milling + Y-axis Control: SIEMENS SLIMline Handwheel: Electronic handwheel X-axis: 276 mm Y-axis: ±60 mm Z-axis: 755 mm Dob Edyjuqa Rzom Deut Machining range Turning length: 755 mm Main spindle speed: 4,000 rpm Torque: 426 Nm (at 40% ED) Power: 25.5 kW (at 40% ED) Tool system Tool turret: 12-station servo tool turret, VDI 40 holder Driven tool stations: 12 Additional equipment Ergonomic control panel: DMG MORI SLIMline multi-touch control Hydraulically movable tailstock: via M-function Hydraulic 3-jaw chuck: SMW MACHINE DETAILS Installation dimensions: 4,298 x 3,202 x 2,295 mm Installation weight: 6,250 kg EQUIPMENT - Chip conveyor - Bar package - Documentation in German - DMG MORI Netservice - Measuring arm for tool measurement - Flushing gun - Signal lamp - IKZ (internal coolant supply) with 12 bar - Programmable tailstock

Condition: used, Year of construction: 2001, operating hours: 35,000 h, Functionality: fully functional, machine/vehicle number: 01160009241, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, workpiece diameter (max.): 570 mm, TECHNICAL DETAILS Name: Heidenhain CNC - Pilot control Z-axis: 635 mm X-axis: 220 mm C-axis: available Machining area Dujb Edyjuqazgsm Dst Workpiece diameter: 570 mm Speed range: 25 - 5,000 rpm Tool system Turret: 12-fold VDI -30 Switch-on time: approx. 97,0000 h Program run: approx. 35,000 h EQUIPMENT - Chip conveyor - Tailstock - Bar passage - 6 driven tools Condition: The hydraulics are not 100% leak-proof. However, the repair is not a major effort.

Condition: excellent (used), Year of construction: 2012, operating hours: 2,138 h, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Acceptance according to new machine IB protocol. Machine has only 2,138 program running hours TECHNICAL DETAILS Number of axes: 3 Control: SIEMENS 810D+ X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Spindle Max. spindle speed: 8,000 rpm Tool system Tool changer: 20-fold Interface: SK 40 Dsb Edymsuqaa Ne Dout Work table Work table size (L x W): 790 x 560 mm Maximum workpiece weight: 600 kg EQUIPMENT - Electronic handwheel - Renishaw measuring probe - Tool measurement - Siemens handwheel

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, The machine was completely measured according to the new machine IB protocol. TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 2,000 mm Y-axis: 600 mm Z-axis: 700 mm Work table Table dimensions: 2,200 x 600 mm Deb Edsu U Iyksym Djut Spindle Speed range: 20 - 15,000 rpm Interface: SK40 Tool system Tool changer: 48-fold EQUIPMENT - Partition wall preparation - Partition wall for pendulum machining - Direct distance measuring systems - Complete cabin (closed at the top)