Machining center

DMG DMC 1035 V ecoline

Condition: used, Year of construction: 2008, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D Powerline Siemens Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 4x H12 / 1x 14 H7 Tool-Presetter: number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg change time 1,6 sec change-time chip to chip 7,0 sec feeds: feed speeds 20.000 mm/min rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DMG MORI SEIKI - DMC 1035 V ecoline Gelhcdotzvy Tewvebn - only 3.800 spindle hours

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Gelhcdwewid Ecovobn Chip conveyor

Condition: excellent (used), Year of construction: 2013, Control system Sinumerik 840D, with 4th axe. Including probes, about 40-50 tool holders. Table 790 x 560 mm Axe X 635 mm Axe Y 510 mm Gbelhcdwjwcl Ursven Axe Z 460 mm Number of tools in tool changer 24 ISO 40 spindle revolutions 20 - 12 000 rpm Machine dimensions ... 2500 x 2000 x 2500 mm Machine weight 3 900 kg

Condition: excellent (used), Year of construction: 2008, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control SINUMERIK 810D SIEMENS table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,80 x 0,90 x 1,55 m - Serial-No.: 1539000017E - Machine ON: 17.647 h - Spindle ON: 11.198 h - Control SIEMENS Sinumerik 810 D Gjlhsum Nd Nocdwvsbn - electrical hand wheel - chip conveyor - coolant equipment

Year of construction: 2010, Condition: ready for operation (used), Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible. Gbolhcdwsvxvfhovsn

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 29110003614, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg Gbelhcdwswrfrpevsn ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle Gelot I Di Ajhcdwvsbn 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: used, Year of construction: 2017, Functionality: fully functional, Control: Heidenhain TNC 640 3D control system X travel: 1450 mm Y travel: 700 mm Gjlhcswqnqlodwvobn Z travel: 550 mm Rapid traverse: 42 m/min Speed range: 20 - 14,000 rpm Inline spindle (40/100% duty cycle): 20.3 / 14.5 kW SK40 tool holder (DIN 69871) Table size: 1760 x 750 mm Lehmann EA 510 indirect NC dividing head, center height: 150 mm 30-position SK40 tool magazine Additional features: Direct position measurement in the X, Y, and Z axes Internal coolant supply with paper belt filter: 20 bar / 600 l Infrared measuring probe: Heidenhain TS 649 DMG

Condition: used, Year of construction: 2018, We offer you: Machining center - vertical Manufacturer: DMG MORI Type: DMC 1450 V Year of manufacture: 2018 Control: Heidenhain TNC 640 Technical data: Gelhcjwqnbqjdwvobn Travel paths: - x-axis: 1450 mm - y-axis: 700 mm - z-axis: 550 mm Main spindle: - Max. speed: 20,000 rpm - Drive power (40/100%): 35/25 kW - Torque (40/100%): 130/86 kW - Tool holder: HSK 63 A Worktable: - Table clamping area: 1760 x 750 mm - Max. table load: 2,000 kg - Loading height: 820 mm Tool changer: - Number of tool places: 60 positions - Max. tool diameter: 80/130 mm - Max. tool length: 300 mm - Tool change time (chip-to-chip): 7.5 s - On time: approx. 38,100 h - Operating hours: approx. 9,700 h Technical features: - IKZ 40 bar - Extended bed flushing - Rotating viewing window - Tropical package Accessories: - Paper band filter 600l - Swarf conveyor - Heidenhain TS 649 DMG probe - Oil and emulsion mist separator Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Changes and errors in the technical data and information reserved, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2014, A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable on the doors is defective. Documentation available. On-site inspection is possible. Gboljwpk Anohcdwven