Second-hand machinery for sale (2,373)

Condition: good (used), Year of construction: 1999, Functionality: fully functional, feed length X-axis: 200 mm, feed length Z-axis: 675 mm, bed width: 300 mm, rotational speed (max.): 4,000 rpm, TECHNICAL DETAILS Djlju T Hx Nsn Sx T Ssut Control: Heidenhain Manual Plus cycle control Handwheel: Electronic handwheel Travels X-path: 200 mm Z-path: 675 mm Machining area Bed width: 300 mm Spindle speed: 4,000 rpm Tool system Turret: 8-fold EQUIPMENT - Movable control panel - Half cabin - Work area lighting - Chip tray with coolant device under the machine bed - Free-standing switch cabinet - Automatic central lubrication - Monitored work area safety doors - Collet chuck - Manual gear range selection in 3 stages

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, sheet thickness steel (max.): 20 mm, cutting length (max.): 4,080 mm, overall weight: 29,000 kg, The machine is supplied EXW free on board. TECHNICAL DETAILS General information: Year of construction: 2013 Control system: Dt-7 Touch Cutting capacity: Cutting capacity: 20 mm in St 45-60 Cutting length: 4,080 mm Cutting angle: 0°30' - 2°30' Working parameters: Number of strokes per minute: 4 - 8 Stroke: 290 mm Dimensions: Machine length: 5,900 mm Machine width: 3,800 mm Machine height: 2,950 mm Machine weight: 29,000 kg Dusln Ssu N Id Iox T Sst Oil system: Oil tank capacity: 500 l Power and energy: Motor power: 45 kW Connected load: 100 A Special features: Removal option: Small parts can be removed from the front. Condition: Very good condition, fully functional Documentation: All documents are available

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, operating hours: 29,623 h, load capacity: 15,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,400 mm, fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Load center of gravity: 600 mm Lifting height: 5,500 mm Djlnsuh Uclj Sx T Seut Free lift: 2,800 mm Mast type: Duplex Fork length: 1,400 mm MACHINE DETAILS Length: 4,850 mm Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T33100-0636, Year of construction: 1996, operating hours: 21,419 h, load capacity: 16,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: standard, construction height: 3,650 mm, TECHNICAL DETAILS Machine type: Diesel forklift Load center: 900 mm Load capacity: 16,000 kg Mast and fork Mast type: Standard Lifting height: 3,700 mm Fork length: 2,180 mm Fork width: 350 mm Fork thickness: 75 mm Doln Sjulyhpex T Sjut Fork carriage width: 2,500 mm Tires Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 MACHINE DETAILS Drive type: Diesel Overall length: 5,200 mm Overall width: 2,550 mm Overall height: 3,650 mm Net weight: 22,220 kg EQUIPMENT - Heating system - Full cabin

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, saw blade diameter: 550 mm, saw blade speed: 3,000 rpm, cutting length (max.): 3,350 mm, saw blade bore: 33 mm, saw blade width: 5 mm, swivel angle A-axis (min.): -23 °, swivel angle A-axis (max.): 45 °, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Saw blade diameter: 550 mm Saw blade bore: 33 mm Saw blade width: 5 mm Workpiece length: 300 - 3,350 mm Swivel range: -22.5° to +45° (servo-controlled) Type: carbide saw blade Saw drive Motor power: 3 kW Speed: 3,000 rpm Feed drive Power: 0.75 kW Speed: 3,000 rpm Cutting area Hydro-pneumatic feed control: available Cutting zone protective covers: available Horizontal and vertical pneumatic clamping devices: available Lubrication system Cooling lubrication system: available Operation and automation Djln Ssvvv Ahjx T Sjut Touchscreen control panel: Smart Touchscreen Panel PC Integration of the digital loading conveyor: available MACHINES DETAILS Dimensions: 4,268 x 1,905 x 1,600 mm Weight: 440 kg Air pressure: 6 - 8 bar Air consumption: 98.5 l/min Compatibility and control Compatibility with cutting lists: available Safety operation (two-hand control): available Data transfer: Ethernet and USB

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,000 h, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, controller manufacturer: Mitsubishi, controller model: M700, number of slots in tool magazine: 24, Müga center RMV250-RT - highly efficient tilting rotary table performs the entire machining process in a single clamping operation. The X, Y and Z axes are completely isolated from chips. The high dynamics of the machine guarantee fast traversing operations and short machining cycles. TECHNICAL DETAILS Traverse path X / Y / Z: 500 / 250 / 350 mm Spindle to table distance: 200 - 550 mm Spindle speed: 12 - 12,000 rpm Spindle power: 5.5 / 7.5 kW Drilling capacity: Ø25 mm x 0.1 mm/rev Tapping: M24 Rapid traverse X / Y / Z: 48 / 60 / 96 m/min Tool holder: HSK-A 63 Tool length/diameter: 200 / 65 mm Tool magazine: 24 places Tool change time: 1.6 s Chip-to-chip time: 3.4 s MACHINE DETAILS Dimensions: 1900 x 2751 x 2750 mm Footprint: 5600 x 3300 mm Weight: 5.5 tons Djln Sxet Sv H Io T Seut EQUIPMENT Pallets: not included in the scope of delivery Belt filter: not included in scope of delivery Chip conveyor: included in scope of delivery Equipment: including HSK-A 63 holder package (9 tools)

Condition: excellent (used), Year of construction: 2014, operating hours: 13,175 h, Functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, TECHNICAL DETAILS Control system: SIEMENS SINUMERIK 840 D 3D control system X-travel: 1,150 mm Y-travel: 700 mm Z-travel: 550 mm Spindle Speed range: 20-18,000 rpm Interface: SK 40 Operating times Switch-on time: 48,384 hours Spindle hours: 13,175 hours EQUIPMENT - Double gripper device incl. direct manual tool loading into the tool magazine - Infrared measuring probe - Direct stroke measuring system incl. air barrier protection - MPC (machine protection through quick shutdown) - Air blast through the center of the spindle Dslneu T Hp Io Sx T Sout - Internal cooling lubricant supply (IKZ) - Paper belt filter with 40 bar operating pressure - Chip conveyor, bed flushing, cabin roof - Rotating viewing window - Flushing gun for chip flushing - Mechanical oil and emulsion mist separator - Active cooling unit for switch cabinet - No handwheel

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2002, operating hours: 7,355 h, load capacity: 5,000 kg, lifting height: 5,950 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fuel: electricity, TECHNICAL DETAILS Drive: electric Load capacity: 5000 kg Load center of gravity: 700 mm Lifting height: 5950 mm Free lift: 1900 mm Mast type: Triplex Fork carriage width: 1,250 mm Telescopic forks: 165 x 70 x 1,400 / 2,400 mm Platform height: 850 mm MACHINE DETAILS Length: 4500 mm Construction width: 2200 mm Overall height: 2860 mm Front tires type: Superelastic Delnjtwdmus Sx T Sout Front tires size: 27x10-12 Rear tires Type: Superelastic Rear tires Size: 27x10-12 Battery Volt: 80 V Charging capacity: 840 Ah Battery year of construction: 2015 EQUIPMENT - Fork positioner - Heating system - Full cab - Full free lift - loader

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2015, operating hours: 15,384 h, load capacity: 16,000 kg, lifting height: 4,610 mm, fuel type: diesel, mast type: standard, construction height: 3,160 mm, fork carriage width: 2,650 mm, total length: 5,520 mm, fuel: diesel, TECHNICAL DETAILS Load capacity: 16,000 kg Center of gravity: 1,200 mm Mast: Standard Mast height: 3,960 mm Lifting height: 4,610 mm Fork carriage width: 2650 mm Fork positioner: 700 / 2350 mm Forks: 350 x 75 x 1700 mm Dsln Setwphqsx T Sout MACHINE DETAILS Engine: Diesel Weight: 24,140 kg Tires: Pneumatic 12.00-20 Length: 5,520 mm Width: 2,520 mm Forklift height: 3,160 mm EQUIPMENT - Sideshift - Cabin - heater - Scales

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 210/210002, travel distance X-axis: 2,500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 18,000 rpm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 90 °, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis (longitudinal): 2,500 mm Y-axis (transverse): 200 mm Z-axis (vertical): 180 mm A-axis (profile rotation): -90° | 0° | 90° Positioning speed X-axis: 64 m/min Y-axis: 64 m/min Z-axis: 40 m/min A-axis (rotation): 60°/s Spindle Maximum power: 4.5 kW Maximum speed: 18,000 - 24,000 rpm Tool holder type: ISO 30 Cooling type: electric fan Compressed air Pressure: 6-8 bar Flow rate: 18 gal/min Tool magazine Manual tool magazine: available Maximum tool capacity: 4 Machining units Direct tool use (top surface): 3 Profile positioning Right-hand pneumatic profile reference alignment: available Control Touch screen: 15" industrial PC Working area Standard number of clamps: 4 Manual clamp positioning on X-axis: available Lubrication of the tool processing area: present Safety barrier (light barrier): optional MACHINE DETAILS Total weight: 1,650 kg Total length: 3,415 mm Total width: 1,615 mm Total height: 2,020 mm Electrics Power: 9.6 kW Current: 30 A Voltage/frequency: 400 V / 3~, 50 - 60 Hz EQUIPMENT - Documentation and manual Duelevvvnwsn Sx T Sst - Manual clamping positioning - Industrial PC with Windows-based touchscreen interface - Data transfer via remote network connection, Ethernet and USB - High processing capacity to increase efficiency - Automatic lubrication in the processing area

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,000 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, number of slots in tool magazine: 30, Hartford Pro 1000 - stable 3-axis milling center with large machining area, ideal for multiple clamping for machining the 6th side. TECHNICAL DETAILS Travel X / Y / Z: 1000 / 600 / 630 mm 4th axis: can be added if required Control: Heidenhain iTNC530 Spindle speed: 40 - 8000 rpm Distance table to spindle: 100 - 730 mm Dueln Sxjt Svgho T Set Number of tool positions: 30 Tool holder: SK40 Feed rate: 12,000 mm/min Rapid traverse X, Y / Z: 20 / 2 m/min MACHINE DETAILS Power consumption: 23 kVA Machine weight: 6 t Dimensions: 2880 x 2290 x 2496 mm Pallets: not part of the scope of delivery Belt filter: not part of the scope of delivery Chip conveyor: available Equipment: SK 40 pick-up pallet (15 tools) included The automation shown and any accessories are not offered for sale.

Condition: good (used), Year of construction: 2000, Functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS control: multipulse 64 Dslsuqbx Hon Sx T Ssut X-axis: 525 mm Y-axis: 400 mm Z-axis: 375 mm Work table Work table size (L x W): 730 x 630 mm Electrical data Operating voltage: 400 V - 50 Hz Power consumption: 12 A Control voltage: 230 AC / 24 DC Back-up fuse: 25 A Dielectric tank Capacity: 400 l MACHINE DETAILS Width: 2,100 mm Depth: 2,450 mm Height: 2,600 mm EQUIPMENT - Machine documentation - Accessories from pictures

Condition: used, Functionality: fully functional, Year of construction: 2000, operating hours: 4,990 h, TECHNICAL DETAILS Length: 8000 mm Overall width: 2780 mm Overall height: 3320 mm Dead weight: 19000 kg Loading shovel width: 2800 mm Technical condition: poor Front tires type: Air Front tires size: 23 5-25 Rear tires Type: Air Rear tires Size: 23 5-25 EQUIPMENT Heating system Full cabin Duoln Sxetwn T Eo T Sst

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 170 mm, number of slots in tool magazine: 12, Machine is provided "free loaded on truck". No dismantling and loading costs! TECHNICAL DETAILS X-axis travel: 3,280 mm Y-axis travel: 1,320 mm Z-axis travel: 170 mm CNC control: BiesseWorks Working beams: 6 pieces Suction cups: 18 pieces Tool magazines: 12 Djln Sx Tovvvcbo Sjut MACHINE DETAILS Total weight: 3,000 kg Electrics Input voltage: 400 V Type of input current: AC Required power: 25 kW EQUIPMENT - Safety mats - BECKER vacuum pump

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, outer diameter: 3,200 mm, rotational speed (max.): 172 rpm, The Rösler Long Radius system concept uniquely combines either throughfeed or batch processing with minimum space requirements. One pass is about 8.5 m long and the container is 3.2 m wide, so that even very long components can be ground or deburred without any problems. TECHNICAL DETAILS Speed: 172 rpm Grinding wheel: RSG 6/6 D Measuring surface: 105.60 m² Workpiece: Camshaft carrier Noise level: 89.5 dB Input width: 630 mm Output width: 350 mm Input height: 1480 mm Discharge height: 1450 mm Continuous flow system; R 400/9 LR Centrifuge: Z 800 K-HA MACHINE DETAILS Drive power vibrator: 22.0 kW Year of construction: 2005 Djlnot Su E Ne Sx T Ssut Drive power centrifuge: 5.0 kW Year of construction: 2017 Supply voltage; 400 V, 50 Hz, 3Ph/N/PE Nominal power: 6.0 kW EQUIPMENT - Water treatment incl. centrifuge and automatic dosing system - Control cabinet for the machine control - Hand lever valve for the separating flap - Central lubrication system

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 34, travel distance X-axis: 610 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 460 mm, number of slots in tool magazine: 30, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control system: Fanuc MSG 502 Number of axes: 4 X-axis: 610 mm Y-axis: 760 mm Z-axis: 460 mm Tool system Tool holder: BT 40 Tool changing device: 30 positions Work table Table dimensions: 740 x 550 mm Pallet changer: 2 pieces MACHINE DETAILS Machine weight: 9000 kg Connected load: 44 kVA EQUIPMENT - 3D probe - Internal coolant supply 50 bar - Oil mist lubrication Duoleuqbnnsn Sx T Sst

Condition: good (used), Functionality: fully functional, Year of construction: 2005, operating hours: 22,793 h, load capacity: 6,000 kg, lifting height: 5,900 mm, fuel type: diesel, mast type: standard, construction height: 3,930 mm, fuel: diesel, TECHNICAL DETAILS Duolnjtwn Hxs Sx T Sst Load capacity: 6000kg Load center: 600 Lifting height: 5900mm Length: 3300mm Overall width: 1900mm Overall height: 3930mm Dead weight: 10520kg Mast type: Standard Fork length: 1140mm Front tires type: Superelastic Front tires size: 355/65-15 Rear tires type: Superelastic

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: 6280028128, Machine is provided "free loaded truck". No dismantling and loading costs! TECHNICAL DETAILS Max. profile cutting width: 320 x 160 mm Min. profile cutting width (depending on gripper position): 30 x 10 mm Raw material system Length of the raw bar system: 7,600 mm Finished part system Finished part length: 3,500–4,600 mm Kurt cell Kurt cell (50-150/150-350): optional Feed system Shortest raw bar length: 1,500 mm Swing arm selection: 5 (option 9) Support plate: 10 (over 120 mm 5) Infeed Servo drive: linear Gripper adjustment electric: Y/Z Gripper guide: standard Remnant piece measurement: optional Remnant piece processing: fully automatic Processing station Number of axes: 5 Milling spindles: 8 (can be prepared) Saw Number of axes: 3 Saw blades (diameter): Ø 550 mm, optional Ø 650 mm Saw angle: 22.5°–157.5° (swivel) Notch cuts: standard (from above) Outfeed chip carriage Number of axes: 1 Outfeed conveyor Delnjvvu S Is Sx T Sout Lifting station: yes Swing selection: 5 Width of outfeed conveyor: 4,000 mm MACHINE DETAILS Dimensions: 20 x 3 x 4 m Weight: 8.8 t Connection power: 39 kW Operating voltage: 3/N/PE 400 V EQUIPMENT - Feed magazine - Loading transport - Processing station with milling unit, saw unit and clamping blocks - Unloading transport of profiles (removal gripper) and unloading conveyor - Acoustic protection cabin - Control panel on the soundproof cabin - Control cabinet - Fencing and protective doors

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, No minimum price - guaranteed sale at the highest bid! Dujln Seuqbm Dox T Set TECHNICAL DETAILS Control: Heidenhain TNC 410 Handwheel: Heidenhain Travels X-axis: 600 mm Y-axis: 500 mm Z-axis: 450 mm Spindle Max. Speed: 6,300 rpm (with gearbox) Max. Torque: 800 Nm Tool system Tool holders: SK 40 Work table Table size: 530 x 900 mm Machine running time Operating hours: approx. 10,000 h EQUIPMENT - Chip tray - External cooling

Condition: excellent (used), Year of construction: 2000, operating hours: 27,383 h, Functionality: fully functional, grinding length: 1,000 mm, grinding diameter: 350 mm, rotational speed (max.): 3,000 rpm, The machine was thoroughly checked by STUDER. No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: GE Fanuc Series 16-T X-axis: 275 mm Z-axis: 1,050 mm Dusln Sxouqbhne T Set Grinding head Rotatable universal sanding head: For external, surface and internal sanding Sanding diameter: 350 mm Table Table load: 130 kg Capacity Max. Revolutions per minute: 3,000 rpm Precision: in the 1 μm range (single part and automatic series production) Machine running time Operating hours: 27,383 h EQUIPMENT - Tailstock - Belt filter system

Condition: used, Year of construction: 1999, Functionality: fully functional, turning diameter: 400 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, workpiece diameter (max.): 570 mm, TECHNICAL DETAILS Control: Heidenhain CNC pilot control Z-axis: 635 mm X-axis: 220 mm Machining area Workpiece diameter: 570 mm Speed range: 25 - 5,000 rpm Tool system Turret: 12-station VDI-30 EQUIPMENT Dueleuqa Tcsn Sx T Sst - chip conveyor - Hydraulic 3-jaw chuck - tailstock - bar passage

Condition: like new (used), Year of construction: 2022, operating hours: 1,300 h, Functionality: fully functional, turning length: 755 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 755 mm, Only 1,300 operating hours - as good as new! TECHNICAL DETAILS V4: turning + milling + Y-axis Control: SIEMENS SLIMline Handwheel: Electronic handwheel X-axis: 276 mm Y-axis: ±60 mm Z-axis: 755 mm Machining range Turning length: 755 mm Main spindle speed: 4,000 rpm Torque: 426 Nm (at 40% ED) Power: 25.5 kW (at 40% ED) Tool system Tool turret: 12-station servo tool turret, VDI 40 holder Driven tool stations: 12 Additional equipment Ergonomic control panel: DMG MORI SLIMline multi-touch control Hydraulically movable tailstock: via M-function Hydraulic 3-jaw chuck: SMW Duoln Souqa Rzsx T Sot MACHINE DETAILS Installation dimensions: 4,298 x 3,202 x 2,295 mm Installation weight: 6,250 kg EQUIPMENT - Chip conveyor - Bar package - Documentation in German - DMG MORI Netservice - Measuring arm for tool measurement - Flushing gun - Signal lamp - IKZ (internal coolant supply) with 12 bar - Programmable tailstock

Condition: used, Year of construction: 2001, operating hours: 35,000 h, Functionality: fully functional, machine/vehicle number: 01160009241, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, workpiece diameter (max.): 570 mm, TECHNICAL DETAILS Name: Heidenhain CNC - Pilot control Z-axis: 635 mm X-axis: 220 mm C-axis: available Machining area Workpiece diameter: 570 mm Speed range: 25 - 5,000 rpm Tool system Turret: 12-fold VDI -30 Doln Souqazgjx T Sjut Switch-on time: approx. 97,0000 h Program run: approx. 35,000 h EQUIPMENT - Chip conveyor - Tailstock - Bar passage - 6 driven tools Condition: The hydraulics are not 100% leak-proof. However, the repair is not a major effort.

Condition: excellent (used), Year of construction: 2012, operating hours: 2,138 h, Functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Acceptance according to new machine IB protocol. Machine has only 2,138 program running hours TECHNICAL DETAILS Dujlnjuqaa Ne Sx T Sjt Number of axes: 3 Control: SIEMENS 810D+ X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Spindle Max. spindle speed: 8,000 rpm Tool system Tool changer: 20-fold Interface: SK 40 Work table Work table size (L x W): 790 x 560 mm Maximum workpiece weight: 600 kg EQUIPMENT - Electronic handwheel - Renishaw measuring probe - Tool measurement - Siemens handwheel

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, The machine was completely measured according to the new machine IB protocol. TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 2,000 mm Y-axis: 600 mm Z-axis: 700 mm Work table Table dimensions: 2,200 x 600 mm Spindle Speed range: 20 - 15,000 rpm Interface: SK40 Tool system Djlsu U Iykjn Sx T Sout Tool changer: 48-fold EQUIPMENT - Partition wall preparation - Partition wall for pendulum machining - Direct distance measuring systems - Complete cabin (closed at the top)