Stationary garbage press No 05

Avermann AVOS SP-16

Condition: good (used), Press: BJ 2000 380V 32A 3,300 x 2,100 x 2,200 mm (LWH) Coupling container: Kodpfjv D A Itsx Ah Uonf BJ 2016 25 m³ 6,000 x 2,500 x 2,600 mm (LWH)

Condition: ready for operation (used), Year of construction: 1991, | Model | Lokomo C-140B Jaw Crusher | | Feed Opening (Width × Height) | approx. 1400 mm × 1000 mm | | Maximum Feed Size | approx. 600–800 mm | | Strength of Material to be Crushed (e.g. rock) | ~200 MPa (varies significantly depending on material) | Kjdpfx Aoxcg Spjh Ujnf | Capacity (Throughput) | estimated 400 t/h | | Motor Power | 200 kW | | Weight Range | 55 tons |

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Type: 36/H/MC Incl.: basic chasis and oil unit Kodpfx Ajpn I H Teh Uonf

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm Knedpfx Ahsivql Ie Uof -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters -Total weight: 8600 kg

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Kedpfx Aoiuky Ieh Uenf

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material Knsdovwlqqopfx Ah Uef 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: Knodpfjh Nyfyox Ah Usf length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. If you have any questions, please contact us at 539 660 495.

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Kjdpfxofhb Tks Ah Usnf

Condition: ready for operation (used), Year of construction: 1989, Used single-toggle jaw crusher 1300 x 900 mm, including spare shaft and FAG 23152 K MB C3 bearings. Year of manufacture and make are unknown. The crusher operated reliably until 2023 and was then replaced with a mobile plant. Kodpfx Aowmgw Neh Uenf

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW Kjdpfx Ahjfhb Tie Uonf 400 V