Three-phase synchronous motor

Baumüller SEW DSOG 100-M

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm Kjdpfewm Rqajx Agnolt travel -y axis 560 mm travel -z axis 510 mm

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, empty load weight: 2,450 kg, Charmilles Robofil 240 Kodpfxewqdrrs Agnolt Year of manufacture 2001 Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is cleaned, overhauled, and tested by us before delivery. We are happy to offer you the commissioning of the machine.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t Kljdpfxjpumdcs Agnot horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Klodpfxjdkdi Tj Agnet Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Kjdpfx Agsifn N Nenjlt Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Parts shown by hand not come. Technical details shown on pictures. Kledpfx Aewybg Segnst

Year of construction: 2015, condition: new, Vertical furnace height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW Kedpfecdi D Dsx Agnslt three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders Klodpfx Aovptmwsgnjt *

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor Klodencfd Rspfx Agnst - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: used, Year of construction: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine Model FS 50 SA Grinding area 500x250x375mm, Vertical automatic with fine-pole electro-magnetic chuck, Grinding wheel diameter 300x50x76.2mm, Klodpfxjwq Nc Ne Agnst with paper band filter system, with manual dresser on top. various wheels and flanges Weight: approx. 2400 kg Space requirement approx. 2500x1800xHeight 2500mm Machine is located with us in 71334 Waiblingen-Beinstein and can of course also be inspected. Please contact us.