Electric motor 5.5/8/22 kW 740/975/1475 Rpm

BEN KDY 200L-8/6/4

Condition: new, machine/vehicle number: 1900040028, conveyor belt length: 1,700 mm, conveyor belt width: 440 mm, conveyor belt speed: 57 mm/s, power: 0.18 kW (0.24 HP), input voltage: 230 V, input frequency: 50 Hz, Conveyor belt in front 1,700 x 440 mm Ledpfx Aotv E Dienxshl FDA compliant

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Lhedeyk Sl Sopfx Anxol Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Subject to price changes, errors, misprints and typographical mistakes excepted. Ljdpfx Answzzh Eexehl

Condition: used, mileage: 113,000 km, power: 100 kW (135.96 HP), first registration: 11/2013, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - 3-way tipper - Trailer coupling Lhjdpfx Anoxznafoxol - New coupling Suspension: Leaf spring suspension

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor Lhjdpfx Ajt Drkysnxjl -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm Lhsdpfx Ajgv Dinjnxsl -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm -Weight: 5.7 kg

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm Ledpfou Idkzjx Anxjhl table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A Lhodpfjd Hn Ufsx Anxol welding circuit at 100% ED: 135 A electrical connection: 380 V space needed: 650 x 550 x 850 mm weight: 118 kg

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Ledjittnzspfx Anxjhl Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps.

Condition: used, ORT RP18B overhauled Lhjdpeuua H Refx Anxel