Used Lasercell 1005 for sale (179)

Condition: like new (used), functionality: fully functional, Log sorting line with 4 pockets, 2 on each side. Material diameter: 100-500 mm, length: 3-5 m. Knodoz Dtchjpfx Aqiob Accumulation conveyor, 12 m, new. Stepfeeder, new. Receiving conveyor, 10 m, refurbished. Pockets, 13 m, 50% new. ABB and Siemens electronics, new. Hydraulic system, new.

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Kodpfx Aqez Dvfxeionb Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: ready for operation (used), Year of construction: 2007, A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible. Kodpfx Aoy Ax Tnoqienb

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Ksdpfx Ajuxmlisqionb

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs, on a solid base cabinet with drawers -Length: 1500mm -Width: 1005mm -Plate: with support ribs -Base cabinet: 3 cabinet doors, pull-outs see photos -Total dimensions: 1500/1005/H910 mm Ksdspbigxspfx Aqionb -Weight: 1200 kg

Condition: like new (used), Year of construction: 2004, operating hours: 2,177 h, functionality: fully functional, machine for producing cylindrical logs with a diameter of up to 400 mm and a length of up to Knedpfx Aqezcgtbsisb 10 m.

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012); Ksdoy Ey E Rspfx Aqisnb

Condition: ready for operation (used), KUKA 1FK7100-5AZ91-1ZZ9-Z S05 servo motor, serial number: YFVN50667032009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kjdpfxjz Dztzs Aqisnb

Condition: ready for operation (used), KUKA 1FK7100-5AZ91-1ZZ9-Z S05 servomotor, serial number: YFW250673501009, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kjdpjz Dzt Isfx Aqienb

Condition: excellent (used), The milling cutter motor has a power of 37 kW, and the roller drive motor has a power of 4 kW. Knodpfx Aqszxc Aijiob

Condition: used, TECHNICAL DETAILS - number of hours : 34373 - strokes X x Y x Z : 220 x 120 x 170 [mm] - fixed table size : 350 x 140 [mm] - working feed : 0 - 5000 [mm/min.] - spindle speed : 20 000 [Rpm] - spindle diameter : 60 [mm] - tools type : ISO 25 - changer : RANDOM 20 positions - spindle motor : 1.5/3.4 [kW] - installed power : 6 [kW] - size : 1830 x 1250 x 1750 [mm] - weight : 1 500 [kg] EQUIPMENT - control CNC FANUC 16i - rigid tapping Kedpfx Asuhbq Nsqienb - spindle cooling unit - oil mist extractor - measuring rule on the 3 axis (1/10 [um]) - tools measurer Blum - Humard robotization for parts - 3 R parts cell - lubricating tank with pump

Condition: like new (used), functionality: fully functional, The machine has undergone a complete overhaul. It features new shafts, bronze bushings, bearings, rollers, rear sprockets, a completely new pneumatic system, a new electrical cabinet, and a feed rate control has been installed. Kedpfszv Euvjx Aqionb

Condition: used, functionality: fully functional, Well-maintained Roland VersaUV LEJ-640 UV hybrid printer in good working condition. This versatile printer can print directly onto a wide range of rigid and flexible materials, delivering high-quality, vibrant results with Roland's UV-LED technology. Ideal for signage, promotional products, packaging prototypes, displays, and specialty graphics. The printer has had regular professional maintenance throughout its lifetime and has been operated by a single owner since new. It has been carefully maintained to ensure reliable performance and consistent print quality. Kjdpfozw U Ubjx Aqisnb Key features: UV-LED hybrid printing technology Prints on both rigid and roll media CMYK + White + Gloss capabilities Suitable for a wide range of substrates Regularly serviced and maintained One-owner machine Reliable and proven production printer Available for inspection and test printing. Please contact us for additional information, photos, or pricing.

Condition: used, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Knodpfjy N E Tbox Aqijb Your specialist and contact for intralogistics

Condition: like new (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 905 mm, measuring range Y-axis: 1,005 mm, measuring range Z-axis: 805 mm, Buy your coordinate measuring machine from the leading specialist in CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a pre-owned machine that has been thoroughly inspected, tested, and guaranteed ready for use – quality you can trust. General machine data: Machine type: CRYSTA-Apex V9108 Year of manufacture: 2020 Manufacturer: Mitutoyo Measuring range: 905 x 1005 x 805 mm Accessories: Probe head mount: PH10MQ Probe head: Renishaw SP25M with SM modules Additional accessories: Kjdoyvit Sopfx Aqisnb Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0 As specialists, we are happy to provide tailored advice to help you find the right machine for your measuring requirements. Worldwide delivery available upon request!

Condition: used, mileage: 44,142 km, power: 150 kW (203.94 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Errors and prior sale excepted! Internal number: 1005. X017544 ----EQUIPMENT * Double cab with 3 seats in the 2nd row * 19-inch alloy wheels * Fixed tow bar with trailer stability control * Battery/generator capacities: standard battery and higher-capacity generator * Gross vehicle weight: Permissible gross weight 3.2 t – Permissible total weight 3,200 kg – Suspension and dampers for vehicles with 3.2 t permissible total weight – Center wheel arch cover – Reinforced on-board tools and jack for vehicles with 3.2 t permissible gross weight * Glove compartment with lighting * Rear wing doors without windows – Rear wing doors without window cutouts – Rear wing door lock with internal release function – Without rear window – Without interior safety mirror * Rear wing door lock with internal release function * Partition walls: high partition without window, plus 8 tie-down eyes for cargo securing – High partition – No child safety lock in passenger compartment – Reinforced tie-down eyes for cargo securing (ISO 27956) * Seat configuration – 3. seat adjustments: Height adjustment for left single seat in driver’s cab * Air conditioning in driver’s cab, electronically controlled * Seat configuration – 3. seat adjustments: Height adjustment for left and right single seat in driver’s cab * Seat configuration – 3. seat adjustments: Height adjustment for right single seat in driver’s cab * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support for left driver’s cab seat * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support, left and right, for single seats * Lighting and visibility – Automatically dimming interior safety mirror – Daytime running lights with automatic headlight control, "Leaving home" function and manual "Coming home" function – Windscreen wiper interval control with rain sensor for front wipers * Differential lock – Mechanical rear axle differential lock * Steering wheel: 3-spoke multifunction leather steering wheel * Multifunction display: Digital cockpit and fatigue detection * Radio navigation system “Discover Media” including “Streaming & Internet” – Voice control – 2 USB interfaces (Type C) in dashboard – Radio navigation system “Discover Media” with 20.3 cm (8 inches) touchscreen, incl. streaming and internet – Navigation functionality/preparation – 4 speakers: 2 tweeters, 2 woofers – Wired & wireless App-Connect * Fog lights incl. cornering lights * Note: Without child safety lock in passenger compartment * ParkPilot front and rear Kjdpfx Aqozi Ihreijnb * ParkPilot rear * Tire pressure monitoring indicator * Driver assistance systems: Rear view camera “Rear View” (static guidelines) * Reinforced tie-down eyes for cargo securing (ISO 27956) * Auxiliary heaters: Water auxiliary heater with programmable parking heater function * Auxiliary heaters: Water auxiliary heater with programmable parking heater function with remote control * 2 broadband loudspeakers * Airbag for driver and passenger * Permanent all-wheel drive 4MOTION * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill start assist * Third brake light * Green tinted windows * Rev counter * Three-point automatic safety belts * ESP Electronic Stability Program * Chassis: 17" chassis and brake system * Electric windows (2) * Fresh air system with multi-stage fan * Transmission: 7-speed DSG automatic

Condition: used, This listing is for a Thomas 7100561 Vacuum Pump. The unit is in full working condition and is ready for immediate release. Ksdpfx Aqsxxyhveienb The Thomas 7100561 Piston Vacuum Pump is a top-tier dry-running WOB-L® piston pump, meticulously engineered for high-pressure applications. Its design prioritises low vibration and balanced flow, ensuring smooth operation while maintaining low power consumption, making it an excellent choice for energy-efficient workflows. Key Benefits: - Precision Performance: Known for its reliability, this pump is ideal for demanding environments, catering to industries such as medical, laboratory, and environmental applications. - Impressive Flow Rate: Achieves a maximum free flow rate of 212 l/min (7.5 cfm), allowing for efficient handling of various tasks. - High Pressure Capabilities: Supports a maximum continuous pressure of 12.1 bar (175 psi), making it suitable for tasks requiring substantial pressure levels. - Strong Vacuum Performance: Provides a maximum continuous vacuum of -990 mbar (29.2 ), ensuring effective suction for a variety of applications. Specifications: - Type: Dry-running WOB-L® piston pump - Applications: Medical, laboratory, environmental - Maximum Free Flow Rate: 212 l/min (7.5 cfm) - Maximum Continuous Pressure: 12.1 bar (175 psi) - Maximum Continuous Vacuum: -990 mbar (29.2 )

Condition: excellent (used), Year of construction: 2003, Chain hoist crane, 500 daN, year of manufacture 2003 Knodpfxjxu Ek Ue Aqieb

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Kodjtmtvljpfx Aqijnb Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: used, mileage: 227,000 km, power: 121 kW (164.51 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,360 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Equipment: Navigation system * Power steering * Partition wall * Central locking Knodpfx Aqoz Aq Ubjijb Speed control: Cruise control Air conditioning: Air conditioner Safety: ABS Payload: 1005 kg Transmission issues, 1st gear pops out, fully operational! Belgian registration!! No TÜV Absolute fixed price

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler Knsdpfjyzn Dtjx Aqieb -Heat exchanger: Oil cooler, shell and tube heat exchanger -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. capacity: 2.5 tons per hour. Knedpfx Aqjzn Au Rjiob

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,550 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty Container Reachstacker Transmission: Dana TE17300 Ksdpfxoz Dydro Aqijnb Condition: Ready for operation and fully functional Technical condition: good Front tyre size: 14.00-24 Rear tyre size: 14.00-24 EN: Central greasing system, rear view camera, air-suspended driver's seat

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm Knsdpsya Dz Defx Aqiob - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Knsdpfx Aqozqzznjijb Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L