Channel baler, baling press

BOA Continu 25 LB

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. Iedpfotyqizjx Ah Usik The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Iodpfx Aorx S Iweh Usik Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.

Year of construction: 2014, condition: refurbished (used), REEPAK REEFLOW 250 ID.NO. 2050 Iisdpfx Aeg Rcabsh Uek Reepak mod Reeflow 250 flowpack machine from 2014 which has previously packed apples but is suitable for all kinds of food etc. Dimensions max packaging L 600 x 250 mm H 100 mm. NOTE THE MACHINE IS IN NEW CONDITION! Dimensions 570 x 145 H 205 cm.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Iedpfovwlqqjx Ah Uoik Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 1990, functionality: fully functional, BOBST AUTOMATIC FOLDER & GLUER MACHINE Ijdpfx Aovm Atboh Usik • TYPE : DOMINO 100-M • SIZE : 100 CM • LOCATION : Our Warehouse in Venlo-Netherlands Details: Full revised in 2022 3 point glueing “NORDSON” Cold Glueing System "ERO" Glueing System 2025 (Optional) “KQ” Glueing System 2025 (Optional) With standart equipments Regularly maintained by Bobst It is completely cleaned and painted It is in perfect condition Available immediately

Condition: good (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Iodpfoic Rl Dox Ah Usik Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), functionality: fully functional, stack height: 100 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 140 kg, Professional Double Corner rounding machine, solid construction, weight 14kg, Iijdpfsv T S Ubjx Ah Uek easy to adjust, cut two corners in one pass, geared brake motor, 3 phase 400V. Machine is in a very good working condition.

Condition: good (used), functionality: fully functional, Due to cessation of operations at the Norderstedt site, for sale as-is, not loaded. Kugler Paternoster punching machine, suitable for Wire-O and index tabs Iijdpfx Ahorn R Rfo Uok Format 50 x 50 cm Includes 2 punching tools Final price reduction!!!

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 33-010, 16 station Gathering machine, handfeeding station, Criss-cross delivery, Spiral raceway, Main milling station, Spine preparation unit, Spine and side glue unit, Cover feeder, Single nipping station, Laydown delivery unit onto conveyor system. Isdpsh T Dhqefx Ah Ujik

Condition: new, Year of construction: 2025, HEAD CORNER ROUNDING MACHINE Ijdpfx Ahokx Hp Es Ujik MAGRAF RA-1