Glass cutting table

Bottero 131BMK Floatschneidetisch

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head Ppodpjyywcvsfx Am Tow No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: good (used), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 Pjdpfeuqlc Njx Am Tspw • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Ppsdpfx Amor Nfvmj Tjw Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, machine/vehicle number: 008147, Max. panel width: 1100 mm Max. panel length: 2500 mm Length of conveyor: 8100 mm Panel return for edgebander: Right Ppjdexqm Hispfx Am Tew

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe Psdpfx Amjw S Efzj Tspw With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. Psdsv Eguyepfx Am Topw In very good working condition. Available: March / April 2025.

Condition: excellent (used), Year of construction: 2022, Vetromac SA 33-26 Cutting table for Glas Max. workable Size: 3.300 x 2.600 mm Thickness: 2-19 mm Speed: 0-180 m/min Options: - tilting arms Podoyn Dqnspfx Am Tspw - Operatorpanel incl. Software

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Ppodpfow U Nzrjx Am Tow

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 • Comes from ongoing production Podpfx Amovxthts Topw • More information on request

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Ppedeyfrvyspfx Am Tew Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately