Used glass burners for sale (23)

Condition: used, Year of construction: 2009, functionality: fully functional, For sale: a complete used solar glass production line, fully functional. Gkjdpfx Ako Aitm Rshed The entire system consists exclusively of components from reputable manufacturers: Glaston / Tamglas (tempering furnace) Hegla Benteler Zippe (cullet recycling system) Kuka (robots) ABB ... The solar glass production line is to be sold as a complete unit, including all machines, fences, platforms, etc. The system is located in Germany and can be inspected by interested parties. Some of the system components can be put into operation for demonstration purposes during an inspection. The system has been regularly maintained and is in good condition. Comprehensive documentation is available.

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Gsdpfx Ajzh Uyrskhjkd Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Condition: used, Year of construction: 2007, operating hours: 8,700 h, functionality: fully functional, machine/vehicle number: 119, total width: 6,570 mm, total length: 23,000 mm, type of input current: three-phase, power: 1,556 kW (2,115.57 HP), Uniglass tempering line with convection system for a maximum size of 2400x4800mm Only 8700 operating hours Heating power: 1056 kW Motor power: 500 kW Gkeds Aibf Nspfx Akhed Total power: 1556 kW

Condition: used, EFCO Glass Tempering Plant 750 °C Thermal glass tempering plant for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering plant from the renowned British manufacturer EFCO Furnaces Ltd. The plant is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System components & design Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the closed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air ("quenched") to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main switch cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Godpfx Akez Hm Ipehjkd Type: Glass Temperer Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Voltage: 380 V / 3 phases Maximum glass size: 1,200 × 2,400 mm Glass thicknesses: 3–19 mm Overall length: 16,800 mm Overall width: 2,800 mm Overall height: 2,250 mm Year of manufacture: 2001 Conformity marking: CE-certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m For clear float glass, heating times of approximately 40–50 seconds per millimeter of glass thickness can be assumed. Estimated production capacity Glass thickness Heating time Calculated batches/h* 3 mm 120–150 sec. 24–30 4 mm 160–200 sec. 18–22 5 mm 200–250 sec. 14–18 6 mm 240–300 sec. 12–15 *Theoretical upper limit based solely on the heating time. Transport, quenching, and cooling times can reduce the throughput. Production area With the specified maximum glass size of 1,200 × 2,400 mm, the area is 2.88 m² per fully loaded batch. The actually usable area may be smaller. Complete set of replacement ceramic rollers: A full, unused/new set of high-quality transport rollers (fused silica rollers) with a new value of over €10,000 for the oven area. "One-stop shop: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems Gkodpoz Rv Dpjfx Akhsd - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Godez Dhm Uspfx Akhekd

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RC 14-43, power: 810 kW (1,101.29 HP), GLASTON RC200 2136-380-R - Tempering furnace, 2100 x 3600 mm Gsdpfsz D Ic Nex Akhskd Group: Tempering - With convection (Low-e) Process: Tempering furnace, 2100 x 3600 mm Code: 90010x7 Manufacturer: GLASTON Model: RC200 2136-380-R Year of manufacture: 2014 Condition: As is Tempering furnace - Maximum glass size: 2100 x 3600 mm - Minimum glass size: 100 x 250 mm - Glass thickness: 4 - 19 mm - Total power: 810 kW - Vortex Plus convection system (top) - Technical description can be found in the appendix as technical data - In good working condition, still in operation - In very good and clean condition - As is - Immediately available Dismantling and installation can be carried out by our service team upon request.

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor Gsdoz Ru Iyjpfx Akhskd The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Glass laminating oven with vacuum mat (bag oven), manufacturer SIMTECH (Belgium), Flexlam series – Glass Laminating Solutions. Manufacturer: SIMTECH (Belgium) Model: Flexlam Laminating Oven Godpjzqmhajfx Akhjkd Electrical panel: Alfametal / Dynamics, Project No. 0467 Year of manufacture: December 2007 Power supply: 3 x 400V AC + PE, 50Hz Network: TN-S, Icc < 10kA Control panel: Allen-Bradley PanelView 300 Micro Controls: Cycle Start/Stop, Vacuum Start, Reset, Emergency Stop Vacuum system: Dedicated vacuum pump, vacuum mat/bag Signaling: Signal tower (End of Cycle / Alarm-Fault / In Process)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total length: 23,700 mm, type of input current: AC, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / Glaston, ProConvection-2448-CTS-20-R 3,8 – 19 mm, 2400 x 4800 mm, Right – Left. Year: 2005. With convection (Low-E glass). Noise reduction cabin included. 400 V, 50 Hz, total power: 1747 kW (heating 1100 kW, motors 647 kW) In good technical condition. Inspection during production is possible by appointment. Gjdpfx Ako Agwh Ijhokd Available: DECEMBER 2026

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Gksdpfx Ajx Trg Askhjd

Condition: used, Glasbeek Finish Gas Chamber Furnace, Type 003.05 Manufacturer: Glasbeek Finish Type: Gas Chamber Furnace Heating Medium: Natural gas Type 003.05 Includes loading cart Maximum temperature: 200 °C Burner type: Forced draft burner Manufacturer: Dreizler Type: M 06.2-95 Type: Forced draft burner Gkjdped Spx Dofx Akhod Modulating operation Burner output: 40-110 kW Gas family: Natural gas Category: 12L Connection pressure: max. 100 mbar Power connection: 220/230V / 50 Hz Motor power: 0.27 kW Electrical power consumption: 0.6 kW Combustion chamber pressure: 1.6 mbar Burner number: 0201756 Year of manufacture: 2002 Dimensions Internal dimensions approx. W1900mm x D2950mm x H1800mm External dimensions approx. W2530mm x D3300mm x H2800mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Gjdpfxox Dy Sfo Akhokd

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Godpfxeyw Hgrj Akhjkd Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A

Condition: used, Year of construction: 2007, temperature max. 450 ° internal length of the oven 1500 mm internal width of the oven 1500 mm internal height of the oven 2000 mm total power requirement 65 kW weight of the machine ca. 12.800 kg dimensions of the machine ca. 2,4 x 2,4 x 2,72 m Nabertherm N 4500/45HA industrial forced-air chamber furnace, never used, in mint condition,to be sold by an educational institution. Capacity 4,500 litres (4.5 m³) B150 controller The Nabertherm N 4500/45HA is an electrically heated forced-air chamber furnace which is primarily used in industrial thermal process applications, in foundries or in glass and fibre-optic processing for heat treatment. • Forced-air system: Ensures excellent temperature uniformity throughout the chamber, optimally tailored to demanding holding phases. • Robust construction: Designed for heavy industrial charges (often loaded using pallet trucks or bespoke charging racks). • Sustainable insulation: Free from carcinogenic ceramic fibres (RCF) in accordance with Gkjdpfx Akj Aaq Srohod modern safety standards. Translated with (free version)

Condition: excellent (used), Year of construction: 2014, Glass tempering furnace Maximum glass size: 2100 x 3600 mm Minimum glass size: 100 x 250 mm Glass thickness: 4 - 19 mm Total power: 810 kW Vortex Plus convection system (top side) More technical information can be found attached as Tech. data file Gjdpfs Afnawox Akhjkd Good working order, still in production In very good and clean condition As is See video Available immediately

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Gksdpoxcb Hnsfx Akhod Max temperature: 1000°C

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace Gksdpfsxguqnsx Akhed EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm Gkedpfxeipx Dye Akhjd KW: 814,5 Dimensions: length = 22 m, width = 7 m

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m Gkedpfx Akjxcbldshod

Condition: excellent (used), Year of construction: 2008, Glass tempering furnace With top convection for low-e glass tempering Maximum glass size: 2100 x 3600 mm Minimum glass size: 100 x 250 mm Glass thickness 3,8 - 19 mm Installed power – 850 kW Layout can be found attached as Tech. data file Gjdpfsz D A D Uex Akhekd More technical information upon request Very good and clean condition Good working order, still in production See video As is

Condition: used, • Front side: 2 boxes for the films Gedpfx Aowc Abvjkhokd • 2 flaps for vacuum • Dimensions: W 2,450 x L 3,000 x H 2,650 mm • For production of double mirrors or laminated glass • Price on request

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm Gedpfx Aoxur Ndekhokd MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW