Bramidan B5 W waste baler

Bramidan Baler B5 Wide

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h Bdsdpfx Aju Thbxoczjk bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Bodpfx Acera Nyuszjdk Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Condition: excellent (used), Year of construction: 2013, screw diameter: 38 mm, This machine is in storage at Plastima Used Machinery Bodpfxjvcqccj Aczsdk

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control Bjdpfx Astuui Djczjdk

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale Bsdpfxstzbvye Aczjdk year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Bjdoumubyepfx Aczjdk Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Cutting unit size: length 1600 mm x width 980 mm Bodpfx Ajwva Hijczsdk Quick-change blade system, SEW gearbox, Including hydraulic pusher, hydraulic rated power: 7.5 kW, Control cabinet, Cutting unit overhauled, Dimensions: Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Total weight: approx. 17 t

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Bdodpfx Ajur Ravjczjk Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bale outlet dimensions: 77 cm x 52 cm Bdodpfxst Ucqfs Aczok The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Bdjdpfxswty Hks Aczjk