Straightening and hot parting machine

BUENDGENS UDR

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, wire working range: 0,1 - 2,0 mm Podpfx Akszwdggonjgr cutting length: 5 - 50 mm output: 600/min. complete with ciller and motorized decoiler

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm Psdpfx Akjvc Ax Nenegr mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine approx.LxWxH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! Psdpfx Asvc Akleknogr i.D. *

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm Pgedpfx Akedx Ryyjnjr coil outside diam.: max. 1.100 mm coil hight: max. 800 mm

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace Pgsdpfx Aeiryyaskner - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Gscxckebw Run out table - 4m Speed -80' m/min. Pgedpfeh In Thex Akner Reconstruction- 2022

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall Pjdpfstycpaex Aknsgr

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg Pgodpjfv Awasfx Aknjr dimensions 160 x 230 mm

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Pgjdpfx Aet Tvk Ajknsr 22 kw motor with discharge auger

Condition: used, functionality: fully functional, Mabi 4QS + Stanze 4H Quadro seam-forming machine and tacking device Mabi 3000E segment shear Mabi casing bending machine Pgodpfxeyz Ad Uo Akner Mabi hole punch Mabi 40 cap trimming machine + Mabi 4K cap punch