Overhead crane Demag 16000mm - 6000kg 1990

Demag 16000mm - 6000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, load capacity: 6,300 kg, For sale is a nearly new overhead crane system from Konecranes. The crane is the CXTS model (single-girder bridge crane / profile girder) and is in excellent condition. ATTENTION: The crane shown in the listing photos has already been sold. However, an identical model is still available, but will not be ready for delivery until the end of 2026. TECHNICAL DETAILS - Capacity: 6,300 kg - Span: 18,600 mm - Lifting height: 6.00 m - Year of manufacture: 2020 - Lifting speed: 4.0 / 0.7 m/min (2-speed) - Trolley travel speed: 20.0 m/min (stepless) - Crane travel speed: 32.0 m/min (stepless) MACHINE DETAILS - Weights: Trolley weight: 440 kg; Crane weight without trolley: 1,832 kg - Classification: Crane Class: S3 (DIN 15018); Hoist mechanism group: FEM 2m (ISO M5), Crane drive group: FEM 1Am (ISO M4) Lajdpfx Absykbime Noh - Electrical data: Power supply: 400 V / 48 V / 50 Hz, Rated power: 4.9 kW EQUIPMENT - Radio remote control with push-button transmitter - Additional mobile pendant control (emergency control) - Overload protection and load data memory - Pre-limit and end-limit switches for crane and trolley travel - Signal horn, charging station, and spare battery - Hook collision protection Transport dimensions of the bridge: - Total length: 19,328 mm - Profile height of girder: 622 mm - End carriage width (wheel base): 2,200 mm Transport and loading can be organised across Europe at additional cost if required. Prices excl. VAT Inspection by prior appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Trading - Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or to contact us, please visit our website.

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,700 mm, feed length X-axis: 5,700 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,700 mm, position of the milling head: Testa birotativa A+B 1° + 3°, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table length: 7,300 mm, table width: 1,090 mm, spindle motor power: 30 W, Equipment: documentation/manual, rotational speed infinitely variable, - FIDIA C20/H6 numerical control - Electronic handwheel Ljdpfxszix Rwo Ab Noah - Operator platform - Spindle cooling system - 24-position tool magazine - 3 longitudinal tables, 1520 x 1000 x 900 mm - Splash guard enclosure - CE marking

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i Ljdpfx Ajyqtnnob Neah turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Lsdpfx Abezcz Srs Njah Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Lsdpfxjz Ear Se Ab Noah Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, total length: 8,635 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2006 – Hoist type: wire rope hoist – FEM/ISO hoist: 2m Dimensions – Span: 8,635 mm center-to-center – Overall length: 8,785 mm – Installation height: 900 mm – Width of wheel set including bumpers: 2,400 mm – Width of wheel set excluding bumpers: 2,200 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm – Dead weight: approx. 2,075 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) Lasdpezi Thwsfx Ab Noh – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired control panel; radio control optional – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but in working order – Dismantled: yes, available immediately

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBUT133-767, Steel single girder suspension crane Bridge crane Crane runway Indoor crane Gantry crane width approx. 8,3m - length approx. 11m, payload 500KG Track width can be changed, end beams (125cm) are bolted with 8 bolts. incl. approx. 2x 11m running rails IPE 300 (were cut in the middle) incl. conductor rail for the power supply by means of the crane track's current grinder Lodpfx Aety Sx Reb Njah The width of the trolleys can also be adjusted to a different girder dimension. Incl. complete control system, floor operation by means of control bottle The crane can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction approx. 2006 Very good condition, equipment was only used for maintenance - hardly used Shipping by forwarding agent, collection preferred Location 75053 Gondelsheim Please ask for shipping prices by postal code, we will send you an immediate and non-binding offer!

Condition: like new (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: OTT-110-015457, operating hours: 12 h, ABUS ELV overhead crane, crane system, bridge crane, hall crane, crane 4 units available!!! 3x manufactured in 2011 (9-14 operating hours) / 1x manufactured in 2016 (50 operating hours) Load capacity / lifting capacity: 3.2t - 3,200KG Lodjzund Dspfx Ab Nsah Track gauge: 9485mm, overall width approx. 9600mm Manufactured in 2011/2016 with floor control Lifting height: 6m Overall height from top of crane to hook approx. 590mm (girder 320mm + lifting mechanism 270mm) Head girder length with buffer approx. 2350mm SWP: only 12.3 full-load operating hours used!!! Remaining service life: 1587.7 full-load operating hours! Crane is disassembled and available immediately. Running rails available upon request. Very good condition - almost like new, inspection certificate available. Column-slewing cranes and wall-slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, X-axis: 13.000 mm Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Lsdpfxozkmqnj Ab Njah Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg Originally installed in an Airbus production facility and used for precision trimming and milling of aircraft fuselage window openings. The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: used, functionality: limited functionality, Year of construction: 2005, machine/vehicle number: HN-BB, operating hours: 12 h, Crane, overhead crane, bridge crane, gantry crane Load capacity / lever load: 3.2t - 3,200 kg Gauge: 9600 mm, overall dimension approx. 9800 mm Year of manufacture: 2005 Lifting height: 6 m Ledpezunz Aofx Ab Nsah Overall height from top of crane to hook: approx. 600 mm Head beam length with buffer: approx. 2450 mm Crane is disassembled and available immediately. The following defects are present: 1) Control valve missing - wiring diagram is available 2) Connector housings for the lifting motor and drive motors are partially broken (rather thin plastic) Used condition Column slewing cranes and wall slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire with your postal code. Collection preferred.