Used spotting presses for sale (47)

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height Bedjulwzmspfx Amislh 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Bledpfjwyuqkex Amioh Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Bledpfx Aswpkv Ismish Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.

Condition: excellent (used), Year of construction: 2006, Table size 3500 x 2500 mm Siemens Simatic OP7 controller Max. work load 80 Ton New price 1 Mil EUR Working force up to 250 Bar Power 30 kW Distance between column:3700mm Hight under roof: 2650mm Table Length: 3500mm Ram stroke: 2100mm Approche speed: 80mm/min. Working speed: 8mm/min. Return speed: 50mm/min. Length: 7800mm Width: 5500mm Blodpfx Ajxam Sdsmijh Height: 6510mm Weight: 135000kg

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Bedpjrr Ui Rsfx Amielh Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: new, machine/vehicle number: DF0178, pressing force: 500 t, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? Blsdjfxyh Ujpfx Amijh :inklusiv ? :inklusiv ? :inklusiv ?

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Bedpfxsxd Tv De Amielh Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Blsdpfoy Ec H Rox Amioh Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0309, pressing force: 200 t, pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. Bsdpfx Amofxyi Doielh pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm Bljdjffamqopfx Amish table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: new, machine/vehicle number: DF0261 - Rev.00, pressing force: 63 t, pressure:63 t table length:1200 mm Blsdpfxsfhcc Ss Amish table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Condition: new, Year of construction: 2025, pressing force: 110 t, Hidrobrasil Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm Available for sale is a hydraulic spotting press from the manufacturer Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a swiveling and tilting table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it especially suitable for spotting, die tuning, and tryout operations in tool and mold making. ==== Technical Data & Information: Spotting Press Hidrobrasil – Tryout Press – 110 t ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Type: Tryout Press / Spotting Press - Pressing Force: 110 t - Machine Weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm ==== Working Area - Maximum Open Height: 1,300 mm - Stroke: 800 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Mounting - Ram rotatable: up to 180° ==== Speeds - Downstroke speed: 1–10 mm/sec - Upstroke speed: 25 mm/sec ==== Hydraulics Bodpfx Asv N D Ncomislh - Hydraulic system: Bosch Rexroth ==== Control and Electrics - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ===== Spotting operations, tool tuning, die tryout, mold making, toolmaking, tryout operations, adjustment processes, flexible tool machining Hydraulic press, spotting press, die trial press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), conforming to EC standards and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these requirements. Our core competence is in custom machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm Bsdpfx Ajtwmp Semislh For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: new, machine/vehicle number: DF0177, pressing force: 315 t, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW Bledefxyhispfx Amieh work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Blsdpshtm E Nofx Amish Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW Bjdpfxod Ap Uge Amielh voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: used, Year of construction: 1998, For sale is a used spotting press from manufacturer Reis, featuring an adjustable pressing force of up to 100 tons. This 4-column press offers a table size of 1600 × 1300 mm, a maximum open height of 950 mm, and is equipped with an ejector in the table, making it particularly suitable for spotting, adjustment, and toolmaking work in mold and die construction. ##### Technical Data & Information: Bjdpfx Ajxd Tiqjmijlh Spotting Press – REIS TUS 80-100 #### General Specifications - Designation: Spotting Press - Manufacturer: REIS - Type: TUS 80-100 - Design: 4-column press - Year of manufacture: 1998 - Pressing force: 26–100 tons (adjustable) - Maximum return force: 45 tons - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Max. open height: 950 mm - Overall dimensions (W x D x H): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm #### Hydraulic System - Hydraulic pump: Rexroth SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Max. operating pressure: 200 bar - Pressure accuracy: ±5 bar - Tank oil volume: 215 L - Hydraulic oil: HLP 36 #### Features / Equipment - 180° tiltable ram plate (up to 3 t) - Table ejector (3.5 t / 130 mm) - Oil coupling sockets for core pullers - Digital measuring system - Material feed through ram plate possible (injection molding) - Speed increase #### Control System - Operator panel - Control system: Siemens / Pilz - Functions: - Ram up / down - Tilt ram plate - Extend table - Operate ejector - Adjust pressing force - Control core pull / oil couplings #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 7.5 kW - Total connected load: approx. 10 kW (spotting press, tryout press, tool adjustment press, toolmaking press, 4-column press, hydraulic press, REIS press, toolmaking spotting press)

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad Bljdpfedxrqxex Amijh :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: used, Year of construction: 2019, pressing force: 200 t, pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t Blodpfx Aed E Irlsmish pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Bjdpfxswva I Hs Amislh Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Year of construction: 1988, pressure 70 t distance between columns 750 mm stroke 900 mm table surface area 700 x 1000 mm Distance table/ram, stroke up 900 mm table height over floor 680 mm ram surface 700 x 1000 mm side window 600 mm max. tool weight 5,0 t max. capacity of swivelling ram plate 2,0 t Speed down 0 - 50 mm/s Speed up 0 - 48 mm/s Working speed 0 - 8 mm/s oil volume 140 l Blodovuumpopfx Amijh power capacity 9,5 kW weight 8,0 t Dimensions (WxDxH) 2,2 x 1,2 x 3,7 m with swivelling ram, movable table, ejector in table

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm Bodpfx Ajvuumcomijlh ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Bjdpfx Amjvuul Seielh Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Bljdpfxstdnnme Amish

Condition: good (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 64511, stroke length: 500 mm, pressing force: 100 t, Very rarely used test press for running in new tools. Machine works perfectly Pressing force: 100 tons Distance table - punch: 500 mm Table size 1100 x 800 mm Weight: approx. 7 tons Dimensions: 2300x1100x3000 mm (LWH) Bsdpfx Aom Rgh Tjmislh Hydraulic unit: 1200x1200x1600 mm (LWH) Free loading