Electric chain hoist, electric lifting device, crane 500 kg with trolley, hoisting unit, electric ho

DEMAG PK2N-F

Condition: excellent (used), DEMAG Chain Hoist Type Pk 2 N-F Lifting speeds: 10 and 2.5 m/min. 380 Volt 0.5 kW Travel drive: 380 Volt 0.5 kW Lsdpfjy Sldlox Anxsag

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Lsdpsh Akm Tjfx Anxjag

Condition: excellent (used), DEMAG Chain Hoist Lasdpfxoyy S Tio Anxsg Type PK 2N-F Stock number (1221) Lifting capacity 500 kg 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Lasdpfsiryyaox Anxsg Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: excellent (used), Year of construction: 2007, Universal Milling Machine, gear type, feed range X/Y/Z 500/350/400 mm, table size 800x400 mm, rotary / tilting table 600x300 mm, motor 3 KW, 18 speeds 40-2000 rpm., ISO 40, quill travel 60 mm, boring capacity Ø 40 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling head, collant systen, halogen lamp, + round- / tilting table, dimensions 1500x1700x1750 mm, weight ca. 2200 kg; ex demonstration machine Ljdpfx Asfvci Eonxjag

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: Lajdpfxsia Taxo Anxjg - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us

Condition: good (used), Year of construction: 2004, Peripheral devices Ledpfx Ansh Hbpwoxsag Brand: Tool - Temp Type: TT - 157E Available: 14 pieces

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer Lasdpfx Aozyplgsnxeg * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Laedpfoyy A Iqsx Anxeg Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, Year of construction: 2005, x-travel 600 mm y-travel 500 mm z-travel 600 mm control iTNC 530 Heidenhain table surface area 900 x 500 mm Lajdpevxwq Ejfx Anxjg spindle turning speed - stepless 0-12.000 U/min spindle drive 10 kW tool taper SK40 DIN 69871 tool magazin: 24 total power requirement 22 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 5,3 x 3,5 x 3,5 m Chip conveyor scraper belt Coolant system 3 pumps / cartridge filter Grundfoss high-pressure pump type CRK2-220/22 A-W-A-AUUV