Hydraulic cylinders

DIMTER

Condition: used, Year of construction: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of construction: 2001 Commission no.: 0682-10 Rotary current: 400 V / 50 Hz Godpfx Aowtgcxobuobh Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Condition: used

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m Gbedpexhqqmefx Abush SAUTER turret 12 pos. , VDI 30 chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Godov T Aqyspfx Abuebh Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Gbodet Sc T Iopfx Abush Finger joint press Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm OPTIONAL with hydraulic unit

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: Gbodpfxsv Rbivo Abush - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : Gsdeg T Spaepfx Abuebh feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive saw >>without electrical equipment

Condition: used, Year of construction: 2004, cutting width max. 700 mm Cutting height max. 120 mm Gbsdpfx Abex Eblvjush saw-blade dia. max. 700 mm

Year of construction: 2019, condition: new, The creation of a written offer / cost proposal for a powder coating system of the company Romer. Gsdpfsc Sd D Sex Abuobh

Condition: ready for operation (used), Year of construction: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input length: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Filling width per cycle: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: Max. usable press width depends on individual lamella widths • In multi-lane operation, filling widths may vary by max. 15 mm • Minimum contact surface per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Press bed and construction: • Press bed area: approx. 2500 x 1300 mm • Stable base frame with lower press table in stainless steel (ground electrode) • Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances • Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width • Integrated hydraulic unit for press force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection value of press (without options): 7 kW • Electrical connection value for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and control panel • Protective cover Additional equipment • Collection table extended to 3700 x 1300 mm (with stainless steel wood support) Gbjdpfox D I Nrox Abujh • Motor-driven multifunctional pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue head • Feed system for different widths • Camera • Washing and rinsing device for glue head • Modem with software for online connection

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Gbsdpfx Aom Habdjbuoh

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Gbjdpfog Npiwox Abuoh Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm Gbjdperf Ty Ssfx Abueh width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Gedpfx Aow Uf Tkobuobh Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system Gedpfx Abswcq Hgsusbh

Condition: used, Dimter Profipress 2500 L Year of manufacture: 2006 Gedpfxeyhggrs Abuebh