Automatic 4 Position Pallet Handling Sys

DMG MORI Automation PH 150

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm Hsdpfx Adjb Eldnjdsng spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Year of construction: 2024, condition: new, arm length 5 m total column height 5,5 m weight max. in kg 80 kg travel of hook 4,3 m *NEW*Never used*OVP* Pillar jib crane - lifting capacity 80 kg with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 HV.3 V16/4 Year of manufacture Hook path max. 4.3 m Chain size 4.2 x 12.2 RDC/TDK Hodpfx Ajvzhhtsddjng Mains connection 380 - 415 v Uc: 24 v

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet Hedofc T Tqopfx Addong -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left Hodechhfuepfx Addeng cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Hjdpfx Ajw Awmteddjng Erowa Robot Easy 250 automation with pallets

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good Hnsdpjd Izmaefx Addog as new condition, approx. 1,000 working hours.

Condition: good (used), Year of construction: 2014, DMG MORI DMU 75 monoBLOCK Year of manufacture: 2014 Control system Siemens SINUMERIK 840D sl ShopMill Working area / Axes Traverse paths X / Y / Z: 750 / 650 / 560 mm 5-axis simultaneous machining NC swivel rotary table Table / Workpiece Table size: Ø 650 mm Max. table load: 600 kg Max. workpiece dimensions: Ø 840 mm, height 500 mm Spindle Tool holder: SK40 Max. speed: 18,000 rpm Through-spindle coolant (IKZ): 40 bar Feeds / Dynamics Rapid traverse X/Y/Z: 40 m/min Feed rate: up to 40,000 mm/min Acceleration: 6 m/s² Tool changer Chain magazine: 60 tool positions Max. tool weight: 8 kg Max. tool length: 315 mm Max. tool diameter: Ø 80 mm (adjacent positions occupied) Ø 160 mm (adjacent positions free) Tool change time (chip-to-chip): approx. 4.9 s Chip removal Chip conveyor Hnjdpfx Ajx N H Rzoddeg The machine is supplied with a newly packaged window/disc.

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Hjdpfx Adsxb Edzodsng Equipment/accessories: - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Hnedpfow T Sd Tjx Addog Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm Hnodpsxgnz Tofx Addog - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!