UV Digital Printing Machine

Durst Tau 330

Condition: used, Year of construction: 2014, TECHNICAL DATA: Type: 5-color digital UV inkjet press with separate white printing unit Length: 4550 mm Width: 1750 mm Height: 2200 mm Weight: 3000 kg Connected load: 39 kW / 60 A Power supply: 400 V, 3-phase, 50 Hz Auxiliary power: 230 V, 50 Hz (chiller) Compressed air consumption: 100 NL/min Required cooling capacity: 18 kW (60,000 BTU/h) Data interfaces: USB 2.0, Ethernet COOLING UNIT (RECOLD RE-C 160 INERT) Cooling capacity: 16,000 W Refrigerant type: R134a Refrigerant charge: 4.5 kg Power consumption: 8.5 kW Max. current: 15 A PRINTING TECHNOLOGY: Process: Piezo DOD Printheads: Xaar 1001 Resolution: 720 × 360 dpi UV DRYING SYSTEM: UV lamps: • 1× Hönle UV GOZ, 7.2 kW • 1× Hönle UV FOZ, 7.2 kW Pinning: LED pinning after print units 1 and 5 Exhaust: Integrated lamp cooling and odor reduction INERT GAS CURING SYSTEM: Type: Oxygen-reduced curing unit Gas consumption: < 6 m³/h WEB AND PRINT PARAMETERS: Process: Roll-to-roll Web width: 350 mm Print width: 330 mm Repeat length: 10–1000 mm Register accuracy: ± 50 µm Print tolerance: • Single distance: ± 0.2 mm • Cumulative per meter: ± 1.5 mm Speed: • 4-color mode: up to 48 m/min • With white ink: up to 30 m/min • Adjustable speed range: 18–48 m/min WEB TREATMENT AND HANDLING: Corona station: 1500 VA Web cleaning: Polymer roller LC 350 Antistatic units: 3 pieces Edge guiding: Before print module Roll diameter (unwind/rewind): max. 610 mm Roll weight (unwind/rewind): max. 120 kg Shafts: Pneumatic expanding shafts, 76 mm core Splice table: Integrated slitting and splicing table SUPPORTED SUBSTRATES: • Coated and uncoated paper • PP, PE, PVC, POPP (white or transparent) • Aluminum foil (coated or uncoated) • PET films • Acrylic coatings • CN-based primers • PET-based primers • Hybrid dispersion primers INK SYSTEM: Ink type: UV-curable, low migration Food & pharma compliance: Indirect contact Free monomers: < 10 ppb Ink laydown: 8.2 g/m² at 100% area coverage Cartridge change: Possible during operation Empty cartridge signal: Optical or acoustic PRINTHEAD MAINTENANCE: Gsdjxzrvdspfx Ah Nsir Ink recirculation system: Enclosed design Automatic daily cleaning: Suction cleaning before operation Manual cleaning: Lint-free cloth SOFTWARE: • RIP software: Esko Artwork • ICC profile management • Supported data formats: PDF-X1, PDF-X3, EPS, AI • Internal storage for designs • Unlimited substrate recipe storage • Touchscreen operator panel CONTROL AND SAFETY: • UV lamp overheat and operational monitoring • Machine interlock in event of UV system failure • Ink level warning system • Emergency stop

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Table size: 900x1150 mm Minimum ream height: 30 mm Giedpfxswth Rwe Ah Njr Manual ream height: 80 mm Compressed air requirement at 6–8 bar: approx. 2 L/min

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 5, color channels: 4, paper weight (min.): 6 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (min.): 152 mm, paper height (max.): 660 mm, number of feeding trays: 6, total length: 803 mm, total width: 1,980 mm, total height: 1,391 mm, counter reading (black): 121,526, counter reading (color): 236,579, Equipment: auto duplex, documentation/manual, Xerox PrimeLink C9070 Digital Production Machine including 1OHCF and EX-i Integrated Fiery Controller. This machine is in excellent condition and has only produced 358,105 prints! The machine has been fully tested and is ready for immediate use. Print Speed - Up to 70 ppm (color) - Up to 75 ppm (black & white) (A4) - Resolution: 2400 × 2400 dpi (high quality) - Recommended monthly volume: 10,000 – 50,000 pages - Maximum duty cycle: up to 300,000 pages/month Looking for other options on the machine? We are flexible and can configure the machine to your requirements! This machine has been thoroughly inspected and tested by our own specialized technical department. If you require further information, please do not hesitate to contact us. Worldwide shipping available. Godpfoyhnayox Ah Nsir

Condition: ready for operation (used), Year of construction: 1989, Heidelberg GTOZP 52 - 696xxx serial - 1989 Godpfx Asx Hrn Tjh Njir Front panel Alcohol dampening 35 mios Perfector documents + tools

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us. Giedpjiklxbsfx Ah Ner

Condition: new, Year of construction: 2024, functionality: fully functional, Konica Minolta’s AccurioShine 3600 with iFoil One option allows printers to meet the demanding needs of today’s printing requirements. The device enables in-house spot UV varnishing, from prototyping to full production, without the need for screens, plates or dies. The AccurioShine 3600 with iFoil One utilizes ground-breaking technology for adding 2D and 3D gloss effects, as well as 3D embossed foiling at a reasonable cost without the complicated steps of conventional systems, allowing printers a range of high-impact finishing effects never seen before – such as personalized embossed foil, while raising profit margins. This machine is a newer generation of MGI JETVARNISH 3D ONE with iFoil Please find all technical specifications in brochure attached. For more info - please contact directly. * Professional demonstration and loading is included in the price. Location - Vilnius, Lithuania. Very good opportunity if you are looking for such a machine! Gsdowmnz Aspfx Ah Noir Also available MGI JETVARNISH 3DS with foil unit. It has possibility to print on sheet up to 120 cm length.

Condition: used, AGFA APIS-Board Rev. 'B2'. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44 - E/S/XT) Giedobrtd Uspfx Ah Nor

Year of construction: 2024, condition: new, The FL-430 automatic labeler is perfect for fast and automatic labeling of flat products. The friction feeder allows products of different thickness, dimensions and material to be easily and reliably separated. Gjdpfx Asickh Reh Neir - LCD display - Standard speed of up to 30 m/min. and a max. label width of 140 mm in combination with the friction feeder 400 installed. - Extended version dispensing labels with a max. speed of up to 50 m/min. and a max. width of up to 260mm - Transparent labeling possible

Year of construction: 2026, condition: new, SoloBaker's superb NEW BCS 201 vertical cake and pie slicer. Universal automatic knife slicer with a rotary table designed for slicing all kinds of cakes and pies. The solid construction, precise drive system, automatic cleaning, blades heating and adjustable cutting head speed give almost unlimited possibilities to adapt the device to the selected product. In combination with the affordable price and small dimensions, the slicer is a good and economical solution for small and large patisserie enterprises. Dimensions 130 x 110 x H 148cm. Power consumption 1,2 kw. Voltage: Single phase 230V 50Hz with voltage stabilizer. Required air connection 0.6-0.8 MPa and a flow rate of 200-300 l/min (depending on the cutting speed). Giodehabdpspfx Ah Nsr Vertical automatic cake and pie slicer (cutting machine) with a rotary table designed for fast slicing of all types of cakes and pies without compromising their attractive appearance and structure into square and triangular portions. With the help of a PLC, the touchscreen allows easy setting of the parameters of the cut part (s) and the built-in microprocessor allows to store up to 20 cutting programs in memory. The cover of the machine is made of stainless steel. The 9L air tank is built into the machine at the front part. The double blades of the knives are made of food grade stainless steel and have a precise drive system and an automatic system for cleaning and heating the blades and an adjustable cutting speed allow the machine to cut various cakes and pies to an effective height 80 mm. Most important functions: - The double blade knife, vibrating in the opposite direction, makes cutting cakes smooth and clean. - Anti-slip rotary table (40x60cm) with a rectangular tray can be easily replaced by 2 round trays (diameter each 30 cm). - Slicing 2 round cakes at the same time. - Locking wheels make it easier to transport the machine to the desired location. - Induction system for heating the knife up to a temperature of 100°C ensures an even cut of hard glaze, chocolate and other similar surfaces. - High degree of accuracy of cutting parameters is achieved by means of two servomotors, which ensure precise operation of knives and table rotation. - Cake pieces are obtained with the same weight, shape and volume, which eliminates the need for additional control. - The speed of lowering and lifting the knife is set according to the characteristics of a particular product - this will allow you to achieve maximum productivity. - Electronic air pressure control ensures smooth and accurate machine operation. - High quality automatic knife cleaning system maintains the perfect appearance of the cut product and eliminates the need to wipe it by hand before each cutting. The cleaning system includes mechanical removal of product residues by a return slider (bar) and a stream of air into a special collection tank. - Residue collection containers eliminate the need for frequent cleaning of the machine and the surrounding work area.. - The machine makes up to 40 cuts per minute. - PLC & touchscreen Siemens. - Built-in voltage stabilizer for stable operation of the electronics and servomotors. CUTTING RANGE: Round cake/pie with a diameter of 15-30 cm - cut into triangles into 2/4/6/8/10/12/14 equal parts. Rectangular cake/pie up to 60 cm x 40 cm - cut into rectangular or triangular shapes. 1 Year Warranty

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Gsdpot Iwyujfx Ah Neir Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Condition: used (see pictures and type plate)