Ball valve internal thread

Edelstahl DN40 R 1 1/2 Zoll

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Type: K-TT 700 Motor: 55 kW 1500rpm Lsdpfx Aneh H S Hdsxoag Fully Stainless execution

Condition: used, 4 tank containers made of stainless steel, used Contents: 35 cbm Order number: 4244 Material: 1.4404/1.4401 External dimensions: 7,820 mm length 2,438 mm width 2,591 mm height Operating data: according to type plate 1 container = -0.4/+4 bar operating pressure, 150 °C 1 container = -0.4/+3 bar operating pressure, 110 °C 1 container = +3 bar operating pressure, 120 °C 1 container = +4 bar operating pressure, 130 °C Design: cyl. horizontal container in a 20' transport frame with curved bottoms half pipe coil approx. 6.5 sqm heating surface, designed for 3 or 4 bar operating pressure 50 mm insulation around cylinder and bottoms Ljdov Dtgajpfx Anxjag connections: 2 domes DN 500 on the upper apex line and various connections outlet in the front weight: approx. 4.4 tons if required: frame for 4 tank containers made of painted mild steel, dismantled for transport external dimensions: 9,173 mm length, 7,254 mm width, 6,124 mm height additional charge on request.

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm Ljdpfx Aoip Niksnxjag - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Year of construction: 1990, condition: ready for operation (used), Now available Lasdpfx Anjhbzi Nexog Used van Aarsen 1400 2D Hammermill incl. feeder with magnet. 200kW 3000 rpm 2 pieces available Amount of hammers: 272 Weight: ca. 5850kg Sieve Diameter: 600mm More information on request

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 -Manufacturer: Siemens Lajdpfodpg T Rjx Anxog -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm -Weight: 9.7 kg

Condition: used, CNC Control, -Transfer in current condition as seen -unchecked from stock -Manufacturer: Siemens -Type: Simatic Sinumerik 3M 6FC 3441-OFA-Z -Power supply: 1 -Control cards: 10 -Type: Sinumerik 03810 -Type: Sinumerik 03200 -Type: Sinumerik 03260 -Type: Sinumerik 03310 A/B -Type: Sinumerik 03320 -Type: Sinumerik 03840 -Type: Sinumerik 03160 -Type: Sinumerik 03830 -Type: Sinumerik 034 -Type: Sinumerik 03 Lajdpsc Itmcofx Anxjg -Dimensions: 550/320/H440 mm -Weight: 13 kg

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: +-10 Volt Lodpfxsh D Syvs Anxeag Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: ready for operation (used), Dissolver Niemann KDV 491-50 Laodpfozidpxex Anxsg Power: 37 kW Speed range: 300-1400 rpm Niemann Speedcontrol All functions controlled via the control panel New clamping jaws Electric container clamping device Control cabinet

Condition: good (used), Year of construction: 1999, operating hours: 11,462 h, load capacity: 1,500 kg, lifting height: 3,500 mm, fuel type: electric, construction height: 2,200 mm, mileage: 11,462 km, Electric forklift Brand: JUNGHEINRICH Capacity: 1,500 kg Lasdpfx Anjzxzggjxog Equipped with a FREELIFT and a SIDESHIFT Lifting height: 3,500 mm Compact model Overall height: 2,200 mm Battery: 2006 Equipped with an external charger Make an appointment for a test drive Watch the video on YouTube.

Condition: excellent (used), Ball valve, ball valve with internal thread Ledpodz A Tfjfx Anxsag -Condition: very good, unused, original packaging -Material: Pressed brass -Internal thread: 2" inch -full: passage, full ball -Number: 63 ball valves available -Price: per piece -Weight: 2.1 kg