Crushing unit

FABO Mobile Tracked Impact Crusher 450-500 tph FTI-130S

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Fpsdevwlqqspfx Abmjb Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. Fpsdpfeh Nyfyex Abmeb If you have any questions, please contact us at 539 660 495.

Condition: used, mileage: 899,992 km, power: 331 kW (450.03 HP), first registration: 09/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2028, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2013, Equipment: air conditioning, Internal vehicle number: G200181 German vehicle On our yard in Kaufungen - Kassel, available immediately More information at * Luis Lucena * Viktoria Sologubova   Mercedes Benz Actros 1845 Year of manufacture 2013 Automatic Retarder   Errors excepted   Fpsdpfxeu Hvyxj Abmsb We are happy to accept your used vehicle as payment. Financing is possible directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.   ----.

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Fodpfx Absip D Rzjmjpb

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Fpedpfx Absxl Rqbemob Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: excellent (used), Used 450 kva Volvo Diesel Generator Engine diesel Volvo TAD1640GE Stamford alternator, RPM 1500, Hertz 50, Phase 3, Voltage 400, Working hours 85, Fpsdpfx Abounb Sbemob

Condition: used, mileage: 709,000 km, power: 310 kW (421.48 HP), first registration: 05/2004, fuel type: diesel, number of seats: 51, gearing type: mechanical, emission class: euro3, brakes: retarder, Year of construction: 2004, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Mercedes Benz O 350 Tourismo * First registration: 05-2004 * EURO 3 Fedpexvhbxofx Abmjpb * Manual transmission * Air conditioning * 50+1 sleeper seats * Retarder * Toilet * TV * MB engine 310 kW / 410 HP V6 * More pictures and videos via WhatsApp * Information without guarantee; subject to prior sale.

Condition: refurbished (used), color: yellow, Year of construction: 2006, VOLVO A40D. YEAR: 2006. HATCHBACK. BOX IN GOOD CONDITION. VERY GOOD GENERAL OPTICAL AND TECHNICAL CONDITION. Fpedpfsu Dk D Tsx Abmeb

Condition: excellent (used), mileage: 1,130,000 km, power: 460 kW (625.43 HP), first registration: 02/2013, Equipment: parking air conditioner, For sale: tractor unit or combination Volvo FH 13 EEV, year 2013, 460 hp. Mileage: 1,130,000 km. Features: stationary air conditioning, air suspension front and rear, factory ADR, refrigerator. SCHMITZ STANDARD semi-trailer, year 2013: serviced, sliding roof, pallet boxes, 385/65/22.5 tires, SAF axles, good floor, holder for 2 spare wheels. Semi-trailer Smitz. Fpedpfx Absw A Imwjmjb

Condition: excellent (used), power: 397 kW (539.77 HP), tire size: Michelin 35/65R35, tire condition: 30 %, Year of construction: 2012, operating hours: 16,983 h, Equipment: air conditioning, cabin, VOLVO L350F Year: 2012 operating hours: 16.983 hrs New engine in 2020, the engine has now approx. 5.000 Hrs ROPS Airco Radio Back drive camera Fsdpjx Nmpwefx Abmjpb central lubrication Michelin 35/65R35 tyres: approx 30% good Bucket with teeth engine with 397 kW CE Operation weight: 56,3 to.