Used surface grinding machines for sale (31)

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Optional Accessories available Hjdjzwpt Espfx Ahaot

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 440 mm, overall weight: 2,900 kg, number of axes: 3, This 3-axis OKAMOTO ACC64 DX was manufactured in 2018. It features a table size of 650 × 440 mm and a maximum workpiece weight capacity of 420 kg. The grinding wheel size is Ø305 × 38 × Ø127 mm, with a speed of 1,800 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC64 DX surface grinding machine we have for sale. Contact us for further details. • Table size: 650 × 440 mm • Magnetic chuck size: 600 × 400 mm • Maximum workpiece weight: up to 420 kg • Grinding wheel size: Ø305 × 38 × Ø127 mm • Grinding wheel speed: 1,800 rpm • Automatic vertical feed: servo-controlled, with fine infeed increments • Hydraulic longitudinal and cross table feed • Automatic grinding cycles • Automatic vertical downfeed Hodszvx Ipspfx Ahaot Additional equipment • Magnetic chuck • Coolant system (depending on machine configuration)

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 650 mm, number of axes: 3, This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details. - Handwheel Graduations: 0.01 mm, 0.002 mm, 0.2 mm- Control Panel: Dedicated pendant control panel featuring an emergency stop button and an analog meter Hjdpfx Ahezu R Rtjajt

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, overall weight: 3,000 kg, total width: 3,350 mm, total height: 1,800 mm, product length (max.): 2,180 mm, number of axes: 3, This 3-axis OKAMOTO ACC 84DX surface grinding machine was manufactured in 2013. It features a table size of 800 x 400 mm and a stone diameter of ø355 mm. With its robust design, this machine is ideal for precision grinding applications. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 84DX machine we have for sale. Contact us for further details. Hjdpoztdz Nsfx Ahaet • Stone = ø355 x 38 x ø127

Year of construction: 2002, condition: ready for operation (used), controller manufacturer: FANUC, Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details. • Offered in a set with Mitutoyo PH 350, including a complete set of accessories • Outer length: 600 mm Hedozr Nciepfx Ahaot • Outer width: 200 mm • Including accessories: 42 pcs of new discs • New discs widths and quantities: 3 mm - 6 pcs, 4 mm - 1 pc, 6 mm - 11 pcs, 8 mm - 9 pcs, 10 mm - 3 pcs, 13 mm - 9 pcs, 16 mm - 2 pcs, 20 mm - 1 pc • Used discs mounted on a carrier - different roughnesses - 10 pcs • Diamond dressers: newly sharpened angle and radius - 19 pcs, suitable for repair - 7 pcs, 4 pcs on the machine • 5x disc drive • 1x balancer • Very good condition • Only one owner • Operated by the same operator 90% of the time

Year of construction: 2022, operating hours: 1,861 h, condition: excellent (used), functionality: fully functional, For sale is a Rösler wheel processing system, type FBA 24/2 Turbo. This system was specifically developed for the needs of professional wheel processing and, thanks to two laterally arranged unbalance motors, enables flawless results with short processing times. The stepless speed control and adjustable motor position allow the system to be flexibly adapted to almost any processing task. The compact wheel processing system is ideal for pre-grinding, fine-grinding, and polishing of standard and custom wheels up to 24 inches. Thanks to easy operation and quick abrasive change, wheels can be polished to a mirror finish in just a few hours – for a high-quality mirror finish in an elegant metallic look, both for used and new wheels. The pneumatic loading and unloading system makes loading and unloading the wheels very easy and quick. In addition to wheels, other components can also be processed here. The working container is equipped with a flexible clamping device for different wheel types and is lined with a high-quality wear-resistant lining made of polyurethane elastomer (Rösler HD 90). The specially ribbed, stress-relieved, annealed welded construction ensures a long service life and smooth, robust operation even in continuous operation. Application areas: High-gloss polishing of wheels of all types (automotive and motorcycle) up to 24 inches Aluminum, cast, and forged wheels Polishing of other engine components Refurbishing of components, e.g., from the classic car sector or the aerospace, defense, etc. industries Technical specifications: Manufacturer: Rösler Oberflächentechnik GmbH Type: FBA 24/2 Turbo wheel processing system Working container: Inner diameter 700 mm, container depth 550 mm Wear-resistant lining: high-quality polyurethane elastomer, Rösler HD 90 Design: durable, specially ribbed welded construction, stress-relieved, annealed Motors: 2 special unbalance motors designed for continuous operation Speed: 3,000 rpm, steplessly adjustable via frequency converter Automatic reversing of direction of rotation Various programs can be stored in the Siemens PLC control system, thus achieving reproducible results. An automatic program sequence guarantees a low error rate for the operator. Hsdpfx Aszw A Rwehaot We have a total of over 80 vibratory finishing systems in stock; please contact us for all your vibratory finishing needs.

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 950 mm, travel distance Y-axis: 440 mm, overall weight: 3,900 kg, number of axes: 3, This 3-axis OKAMOTO ACC84 DX surface grinding machine was manufactured in 2018. It features a table size of 850 × 400 mm and a maximum workpiece weight of 700 kg. The grinding wheel dimensions are Ø355 × 38 × Ø127 mm, with a grinding wheel speed of 1,800 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC84 DX machine we have for sale. Contact us for further details. Hodpfx Ahjzn N E Nsaot • Working area: • Table size: 850 × 400 mm • Maximum workpiece weight: 700 kg • Distance from table surface to spindle centre: 47.5–547.5 mm • Grinding unit: • Grinding wheel: Ø355 × 38 × Ø127 mm • Grinding wheel speed: 1,800 rpm • Automatic vertical feed: 0.001–0.03 mm per pass • Feeds and cycles: • Hydraulic longitudinal table feed • Hydraulic cross table feed • Automatic grinding cycles • Automatic vertical downfeed Additional equipment • Magnetic chuck, 800 × 400 mm • Coolant system (depending on machine configuration)

Condition: as good as new (ex-display), functionality: fully functional, Demonstration unit. Hsdjzwv E Uspfx Ahaet

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B • Power Supply: 200 V Hsdpfx Ahezk I Afjajt • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 250 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 60,000 rpm, number of axes: 5, This 5-axis KUGLER Micromaster MG2 was manufactured in 2002. It features an X-axis travel of 250 mm, Y-axis travel of 305 mm, and Z-axis travel of 200 mm. The machine is equipped with a high-speed Fischer Precise spindle, capable of speeds between 60,000 and 160,000 rpm, and a SERCOS real-time motion control interface. If you are looking to get high-quality grinding capabilities, consider the KUGLER Micromaster MG2 ultra-precision micro-grinder we have for sale. Contact us for further details. • Spindle speed range: 60,000-160,000 rpm • B-Axis: ±90° • C-Axis: Integrated • 5-AXIS: 5-axis kinematics (X, Y, Z, B, C) • Oil tank: Approx. 450 l • Ultra-Precision Micro-Grinder • Year of manufacture: 2002 • Condition: Used • Spindle: Fischer Precise • Spindle controller: PCF310 • Coolant system: RumA oil-cartridge system • Fischer Precise high-speed spindle • PCF310 spindle controller • RumA oil-cartridge coolant system • SERCOS real-time motion control interface • Spindle overhauled in 2019 Hedpfezk Eipox Ahast • Vacuum table / fixtures available on request

Condition: good (used), machine/vehicle number: 64 DX, Okamoto 64 DX surface grinder. Hodpfx Ahozkwudjast

Year of construction: 1990, condition: excellent (used), O F F E R Subject to prior sale and errors excepted, we can offer you, without obligation, the following ex-stock: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Model: T Year of manufacture: 1990 _____ Grinding carriage center height: approx. 200 mm Grinding wheel Ø x bore: 200 x 30 mm Grinding wheel speed: approx. rpm Hedjxzuuvopfx Ahaot Grinding wheel drive power: approx. kW Workpiece headstock center height: 160 mm Workpiece headstock longitudinal adjustment: approx. 100 mm Workpiece headstock transverse adjustment: approx. 200 mm Workpiece headstock swiveling either side: approx. 2 x 30° Collet chuck capacity: 0.5 – 20 mm Weight: approx. 500 kg Accessories / Special equipment: • Workpiece headstock swiveling for pointing and deburring • Collet chuck with approx. 10 different collets • Plexiglass safety guard for grinding wheel • Compact, free-standing on sturdy base • Optional cross-slide feed unit Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further tool grinding machines available from stock – please enquire!

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter Hjdpjyw Rhmjfx Ahajt - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2006, operating hours: 45,852 h, condition: ready for operation (used), travel distance X-axis: 380 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 280 mm, controller manufacturer: FANUC, controller model: Series 160i-MB, overall weight: 8,000 kg, total width: 1,765 mm, total height: 2,200 mm, spindle motor power: 9,000 W, product length (max.): 2,500 mm, spindle speed (max.): 6,000 rpm, number of axes: 5, This 5-axis Schneeberger Sirius HPM was manufactured in 2006. It features a powerful control unit, GE Fanuc Series 160i-MB, and operates with grinding oil. The machine is equipped with an Absolent A5 oil mist extraction system for enhanced performance. If you are looking to get high-quality grinding capabilities, consider the Schneeberger Sirius HPM surface grinding machine we have for sale. Contact us for further details. Hedpfozdt H Nsx Ahaot - Control Unit: GE Fanuc Series 160i-MB / Quinto 4- Operating Medium: Grinding oil- Automation: None / Without loader- Working Voltage: 3 x 400 VAC- Kind of Current: 3L + PE- Frequency: 50 Hz- Control Voltage: 230 VAC / 24 VDC- Rating: 48 kW / 41 kW- Rated Current: 83 A- Optional Equipment: Absolent A5 oil mist extraction system (visible mounted on top of the machine)- The spindle is present but needs to be repaired and is not currently running.- The frequency converter for the spindle is also not working.

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,500 mm, number of axes: 3, This 3-axis ELB Surface Grinder was manufactured in 1989. It features a working area of 1,500 mm x 500 mm, ensuring ample space for various grinding tasks. If you are looking to get high-quality surface grinding capabilities, consider the ELB Surface Grinder we have for sale. Contact us for further details. - Manufacturer: ELB- Working Area: 1,500 mm x 500 mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Hedpfszb Et Dox Ahast

Year of construction: 1989, condition: ready for operation (used), travel distance X-axis: 1,200 mm, number of axes: 3, This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details. - Manufacturer: Reform- Working Area: 1,200mm x 500mm- Year of Manufacture: 1989- Condition: Very good / Fully functional Hsdpfxjzb Erao Ahaot

Condition: good (used), 1 x table grinding machine Sigg Polyfinish D 2 for small parts with 10 chambers. Accessories: 8 x plastic containers, 4 of which come complete with lid and holder. Hodpfx Aevpikxjhast Further details to follow. The machine can be viewed under power.

Year of construction: 2000, condition: ready for operation (used), overall weight: 8,100 kg, number of axes: 3, This 3-axis ROSA ERMANDO STEEL 11.7 CN was manufactured in 2000. It features an ECS 2401 control system, a grindable size of 1,000 x 750 mm, and a grinding height of 600 mm. The machine can handle a table load up to 1,400 Kg and offers a longitudinal speed of 1–38 m/min. Consider the opportunity to buy this ROSA ERMANDO STEEL 11.7 CN surface grinding machine. Contact us for more information about this machine. • Grindable size: 1,000 x 750 mm • Cross travel: 750 mm Hedpfxjygl Hzj Ahajt • Longitudinal travel: 1,000 mm • Grinding height: 600 mm • Longitudinal speed: 1–38 m/min • Usable table surface: 1,100 x 500 mm • Permissible table load: 1,400 kg • Wheel dimensions: Ø 400 x 30 mm • Rotation speed: 1,450 rpm

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Hjdpfx Ahegxug Neaot Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) Hedpfxogxug Ts Ahajt spindle diameter: 35 mm Buffer: 50 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tension, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers, with buffer 50 mm

Year of construction: 2021, condition: new, for grinding belts max. 80 mm x 2000 mm length with 3 kW drive power, for contact wheel Hsdpfx Aegxuhmjhaet max. diameter 80 mm x 80 mm

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm Hedpfx Ahogxug Eoajt grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers With top roller for free belt grinding

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. Hodpfxswdnb Rs Ahajt If you have any further questions, please feel free to contact us!

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm Hsdsxby Sgspfx Ahast - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Year of construction: 2003, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, overall weight: 2,000 kg, table load: 300 kg, number of axes: 2, Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details. Hjdpfx Aey I U Hbjhaet • Table size: 600 × 300 mm