Refrigerant compressor

FAE PT 300 / 273h! / Forstmulcher / Bodenfräse

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length Dedpjrgzv Njfx Anzewa * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), power: 264 kW (358.94 HP), operation weight: 23,600 kg, tire size: Bridgestone 30/65R25, tire condition: 70 %, Year of construction: 2023, operating hours: 1,710 h, Equipment: air conditioning, VOLVO A30G Year: 2023 Operation hours: 1.710 hrs. ROPS Airco Back drive camera Radio Central lubrication Dsdpeya U Unjfx Anzewa body heating Tailgate Bridgestone tyres 30/65R25 approx 70% good VOLVO D11M Motor with 264kW CE Transport dimensions L/B/H - 10.5 x 3 x 3.4m Operation weight: 23,6 to.

Year of construction: 2023, condition: new, Layout: Backhoe 20 years of experience, long boom-arm manufacturing suitable for all brands and models Dedon Tmy Rjpfx Anzjwa Please send a message or call for information and offers.

Condition: new, With the Brugger Power Split S30, we present a powerful vertical log splitter that impresses with a splitting force of 30 tons. This robust machine is extremely versatile and offers maximum flexibility in terms of drive, whether through the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be split quickly and efficiently. Dedpstpxgdsfx Anzjwa Special features: - 30T splitting pressure - Combined drive: 5.5kW electric motor & PTO drive - Weight: 386kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S30 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available as an option. The Brugger Power Split S30 is the ideal choice for anyone who needs a reliable and powerful solution for splitting wood, whether for professional or private use. Prices: Power Split S30 = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Dwjdpforblx Hjx Anzea - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dwjdpevpfutefx Anzja Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer!

Condition: used, Year of construction: 2015, operating hours: 6,850 h, power: 129 kW (175.39 HP), front tire size: 600/70R28, rear tire size: 710/70R42, Equipment: compressed air brake, OPERATING HOURS 6800 / AUTOPOWR / IVT - 50 KM / COMMAND CENTER DISPLAY AUTOTRAC PREPARED / JDLINK-CAPABLE / 4600 PROCESSOR / CAB PR.-CV CAB WITH COMMAND ARM STANDARD SEAT / MIRROR - MANUAL TELESCOPIC PANORAMA WS W/PD / STANDARD RADIO / HYD Dwedpfsu Rvklex Anzsa

Condition: new, overall weight: 4,500 kg, Year of construction: 2026, LONG REACH excavator arm 8m, 10m, 12m, 14m, 16m, 18m, 20m. 22m + BOAT Dwjdpeua U Acefx Anzea POSSIBILITY OF PRICING FOR ANY MACHINE. POSSIBILITY OF PRICING FOR LENGTHS FROM 8M UP TO 22M BELOW OFFER FOR LONG REACH BOOM 16M FOR JCB JS 220 + BUCKET 0.6 M3 TECHNICAL SPECIFICATIONS Material: S355 steel Length: 16 m Maximum reach: "forward": 15.5 m Maximum digging depth: 11.2 m Weight: ca. 4500 kg Dipperstick capacity: 0.6 m3 All pins are hardened (to increase hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of couplings Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are equipped with grease nipples All "pipes" are phosphated

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Dwsdjtpw R Topfx Anzoa Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with angled front corners at 45° and rear taper of approximately 750 mm x 10° •3 pairs of lashing rings •Hardwood decking, 30 mm thick Extendable platform: •Extendable platform with rear taper of approximately 1,000 mm x 8° •Cutouts in the outer frame of the platform for attaching lashing straps •Hardwood decking approximately 48 mm thick, with chequered plate decking over the axles Two-piece steel ramps: •One pair of galvanized, two-piece steel ramps with approximately 48 mm thick hardwood decking •Ramp with hydraulically folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable •Maximum load per pair: approximately 40,000 kg Axles and tires: •BPW axles and suspension, 2 fixed axles, 1 steered axle •Technical axle load: 12,000 kg •Electro-magnetic reversing lock activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Braking system: •WABCO braking system according to EU regulations with EBS-E Paint finish: •First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component zinc dust primer •High-quality 2-component topcoat, single-color in MB 7350 Novagrau •Rear section metallized and painted in RAL 9010 Kingpin: •JOST kingpin with 2-speed gearbox for 24t lifting capacity (50t test load). Steel structure: •Steel structure made of high-strength fine-grain steels •Steel grades: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system according to EU regulations, lighting 24 volts •ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S and 15-pole sockets Included accessories: •One spare wheel with holder •One galvanized steel front bulkhead, approximately 400 mm high •Yellow-red air couplings on the galvanized connection strip at the front •4 chocks •One holder for a rotating beacon at the rear of the semi-trailer •Mounting in the rear area of the gooseneck for aluminum support ramps •Galvanized folding supports under the taper of the platform •Cover plates to bridge the gap between ramps and platform Dwjdjhlz S Nopfx Anzsa •White reflector tape according to EU regulations on the side, on the extension and at the rear in red •Electro-hydraulic unit at the rear, under the platform •On the gooseneck and on the ramps, one holder each on the left and right for warning signs including socket •Control valves for the ramps mounted on the right side of the semi-trailer •Aluminum side and rear walls on the gooseneck, approximately 2,440 x 400 mm •The rear, galvanized stake pockets are removable (length of the superstructure approximately 2,560 mm) •Four warning signs that extend by approximately 400 mm with a position light •3 pairs of WADER container pockets in the platform for a 20ft, 30ft or 40ft container •6 pairs of stake pockets (100x50 mm) in the outer frame of the platform •Extensions, galvanized, extendable by approximately 230 mm on each side •Square ladder rails 20 x 20 mm every 200 mm on the outer frame of the platform taper •A lacquered sand layer as an anti-slip coating on the chequered plates, over the kingpin and the platform •Load manometer for determining axle loads, including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel structure bead-blasted, then the defined visible surfaces hot-dip metallized with ZINACOR 850 (zinc 85% - aluminum 15%)