Articulated Dumper

Volvo A30

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Pgedpfx Aevqbhloc Her Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED Pjdpezmpryjfx Ac Hegr * 4 work lights on the front roof of the cab Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 14,300 h, Metso Nordberg HP200 – Cone Crusher for Sale Operating hours: 14,300 Condition: Fully operational, currently in use, regularly serviced Machine Description We offer a Metso Nordberg HP200 cone crusher – one of the most proven and efficient machines in its class. The crusher is still in daily operation, maintained according to manufacturer recommendations and kept in very good technical condition. Ideal for producing high-quality aggregates in both stationary and mobile installations. Key Features - High crushing efficiency and consistent product quality - Excellent performance on hard and medium-hard materials - Hydraulic closed side setting (CSS) adjustment - Stable operation and low wear costs - Reliable, robust design commonly used in European quarries Pgsdpfx Acoxyi Rie Hjr Technical Specifications (HP200) - Head diameter: 940 mm - CSS range: 6–38 mm (depending on configuration) - Maximum feed size: 185 mm - Motor power: 132 kW - Capacity: up to approx. 250 t/h (depending on application and settings) - Crusher weight: approx. 12,000 kg Details of the Offered Unit - 14,300 operating hours - Fully operational, in continuous use - Regular maintenance and service records available - Inspection of the machine in operation is possible

Condition: used, Year of construction: 2020, operating hours: 5,000 h, * Liebherr R920 Compact LC tracked excavator * Year of manufacture: 2020 * 4,990 operating hours * 22,400 kg * 110 kW * OQ65 fully hydraulic quick coupler * Variable-geometry boom * Blade * Central lubrication system * Refueling pump * Air conditioning * 3 m undercarriage width * 75 cm track pads * 180° camera Pgsdpfxjzbwn Ho Ac Hor * Undercarriage in very good condition * Maintained according to service schedule

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches Psdpjrgzv Nsfx Ac Hegr * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. Podpfx Acoxa Anhe Hjgr EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Condition: new, functionality: fully functional, power: 195 kW (265.13 HP), fuel type: diesel, color: yellow, overall weight: 18,500 kg, Year of construction: 2023, machine/vehicle number: SW4055CD00288, Equipment: air conditioning, cabin, cruise control, standard shovel, The new SANY SW405 wheel loader takes productivity to the next level. With its powerful Deutz common rail diesel engine and rugged, robust frame design, it is the ideal choice wherever power and reliability are required. Its distinguishing features are strong unloading forces and large tipping loads. Moreover, with its many equipment options, this powerhouse is a multipurpose machine that can handle a wide range of wheel loader tasks with flying colors. Psdpsrblkksfx Ac Hsgr

Condition: new, Year of construction: 2026, We have all Europe documents! We can delivery the trailers with FOB-EXW-CPT-CFR-CIF If you have an interest please contact with us; For European Countries; For African Countries; Pjdpfx Acjqx Nd Re Hsgr

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Podpfx Ajg Sk T Doc Hogr Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: new, PRICE: 2000 EUR Podpfjx Dcdqox Ac Hjgr Meat grinder Manufacturer: Ital Form Completely made out of stainless steel Voltage: 220V / 50Hz Power: 2.2kW