Working platform semitrailer

FAYMONVILLE MAX Trailer MAX210 Telesattel

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire fleet of vehicles—including those available for immediate or short-term delivery—on our website. Extract from the equipment list. Complete equipment details available upon request. Cargo area: * Extendable cargo area with pneumatically operated locking mechanism * Cargo area with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Landing gear: * JOST mechanical landing legs with 2-speed gearbox, 24t lifting capacity (50t test load) Tyres: * 385/65 R 22.5 tyres Axle: * BPW axles and suspension, all axles hydro-mechanically forced-steered * With disc brakes * Technical axle load: 10,000 kg (ET 0) Redpfx Aoxl Nf Dob Rjch * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paintwork: * High-quality 2-component (2K) topcoat in single-tone RAL 3002 Carmine Red Accessories: * Steering from front and rear, operated via cable remote control with push buttons, with single-track axle monitoring (without installation in towing vehicle) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * Galvanised connection strip at the front with yellow-red air couplings * Mounting bracket for rotating beacon at the rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the cargo area * 1 spare wheel holder under the cargo area on the right-hand side (no spare wheel included) * Load gauge for determining axle loads, including load diagram Including special accessories: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the cargo area for 1 x 20' container, 2 x 20' containers or 1 x 40' container; additional locking point in the extension for a 45' container * 4 crosswise pairs of stake pocket rails mounted in the cargo area for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes, screwed to the inside of the front wall * Boarding ladder mounted left and right in the direction of travel * INOX toolbox approx. 1,200 x 460 x 550 mm, mounted at the front under the cargo area on the left in the direction of travel * Additional INOX toolbox approx. 1,200 x 460 x 550 mm, under the cargo area on the left in the direction of travel * Cargo area with approx. 30 mm thick wooden floorboards framed in omega profiles * Lift axle on the front axle with control via TEBS E * BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear panel * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart Rcjdexf Sifopfx Ab Roh * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Loading Platform * Double extendable version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tension belts (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles hydro-mechanically forced steered * Air suspension with lift and lower valve Braking System * According to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including Accessories * Remote steering from front and rear via cable remote control with push buttons, with single-track control (no installation in tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder mounted on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection strip at the front * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * European reflective signs (red-yellow) on the trailer's rear * One mudflap on the trailer's rear * Manual and instructions on USB stick * Loading platform with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Galvanized supports under the inclined section of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Hook-in rail for ALU access ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load chart * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection cover * Spiral cable supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with connector (NATO-NATO) Rjdpfek Ugacjx Ab Rech * Coated sand layer on the central beam as anti-slip protection * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of crosswise stake pocket rails mounted in the loading platform, for 100 x 50 mm plug-in stakes * Storage for up to 9 pairs of plug-in stakes, approx. 100x50 mm, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the loading platform left and right in the direction of trav