Positioning machine

Festo 2.Stk Linienportal C99023

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Gsdpfx Aofww Sqjbuobh Please do not hesitate to contact us.

Year of construction: 1991, operating hours: 0 h, condition: used, machine/vehicle number: 20086, Sliding door For sale is a 1991 Chevrolet Step Van manufactured by Grumman Olson. Vehicle is equipped with a 6.2L V8 OHV 16V DIESEL. Mileage 178460 Miles The hatch in the rear can be opened without any problems. The general condition is good. Vehicle is sold as is with US Title. Gedpfx Aohrf H Tobujbh A data sheet must be procured itself what is needed for registration in Germany. If you have any questions, please contact me by mail or phone, quoting the internal number 20086.

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Gedpfx Aovvkt Iobuebh

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min Gsdpfok Sat Dex Abuebh weight 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2010, Used Hankook model 7NB x 4000 2 axis CNC lathe Year 2010, serial number 41L09117 Manufacturer Hankook Country of Origin South Korea Model Protec 7NB x 4000 mm Machine Type Description 2 Axis CNC flat bed turning Centre CNC Control Fanuc 21- iT with MG-i MACHINE CONSTRUCTION & FEATURES  Heavy Cast iron Construction  Heavy Duty Hardened & Ground Solid Slideways  Large Spindle Bore  Full Length Rear Chip Guard  Automatic Lubrication to All Critical Areas MACHINE CAPACITIES Swing Over Bed Ø 750 mm Swing Over Carriage Ø 480 mm Max. Turning Dia. Ø 750 mm Gbsdpfx Abev Rqftjujh Distance Between Centres 4,000 mm Load Capacity 3,000 Kg SPINDLE Spindle Bore Ø 176 mm Nose A2-11 Spindle Centre Taper MT #6 Spindle Speed 3 – 1,000 RPM Spindle Speed Range Manual 2 Step AUTOMATIC V8 TURRET Number of Tools 8 Holder Diameter Ø 60 mm Mechanism Electric FEEDS Rapid Traverse X 3 m/min Z 6 m/min Travel X 425 mm Z 2070 mm TAILSTOCK Taper/Diameter MT #6 Quill Diameter Ø 112 mm Max. Quill Travel 200 mm MOTORS Spindle 15/18 Kw X - Axis 1.2 Kw Z - Axis 3 Kw WEIGHT Weight 5,520 Kgs STANDARD MACHINE FEATURES • CNC System • Single Front Door • Coolant System • Foundation Bolts and Liners • Work Light • Work Light • Centre Sleeve MT #6 x Taper 1/10 • Tool Box • Centre MT #6 • Full Length Rear Guard • Live Centre MT #6 STANDARD FITTED MACHINE OPTIONS • Fanuc 21-iT • Transformer for 415V, 3Ph, 50Hz HANKOOK 7NB x 4000mm with Fanuc 21-iTB Modified guarding for long boring bars 20” Chuck Steady rest 50 - 250mm Steady rest 250 - 450mm Algra Automatic 8 station Turret Boring Bar attachment 100mm diameter 60mm diameter boring bar toolholder (1 off) Inch Metric conversion Custom Macro B Additional Block Skip G Code System B/C Programmable Data Input Actual Spindle Speed Output tool offsets 32 Pairs Extended Part Program Edit Manual Guide i External i/o device control External data Input High Skip ADDITIONAL ACCESSORIES INCLUDED • Special Revolving Centre (TBC) • Marposs TT30 Removable Tool setting Arm • Short LNS swarf conveyor and coolant / swarf trays • Sandvik damped/tuned boring bar of size 100mm dia x 1500mm length supplied with the boring attachment. • Filtermist filtration • Additional door guarding.

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Gsdop E Eglepfx Abusbh working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Gbedpfx Abouiy Nyoujh Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Gbodpfxegyy I Ao Abuoh Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm Gbjdpfep E Ed Rjx Abueh roll core for rolling rings: 190 mm

Year of construction: 1998, condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Specifications: • Blade diameter: 550mm Gbodpotlpl Hjfx Abueh • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm