Tipper

Fliegl DHKS 390 - 27 m³

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 55 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Additional Information Chassis Fine-grain steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load not possible; in the uncoupled state, the vehicle must be tilted backwards. Chocks + holder Underrun protection, foldable Half shell mudguards Integrated mudguard holder, surface designed to repel stones Splash flaps behind the last axle in asphalt design, attached to the mudguard with hinges, with the option to be hooked onto the mudguard at the top, mudguard shortened Towing hook at the rear Axles + Suspension SAF drum brake axles Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, incl. forced lowering and starting assist; operation via 3x braking (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinders and ladder on the front wall. Membrane rear wall Rear wall as a pendulum flap, externally supported with double hook locking. 2 clamping screws with lever closures on the side at the bottom. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, side, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform with ladder, connecting plate for air/electrical and brake connections with large space for optimal operation. Roll-up tarpaulin on one side for storage on the right, with central locking on the left Operating Instructions For transport of salt, lime, etc., we recommend a tilting cylinder with a hard chrome-plated piston rod to protect against rust The specified total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration/ Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Manufacturer's certificate for thermal vehicles according to RS 10 - 2013 prepared for license plate holder, single row Contour marking Iasdpfx Agei Rix So Uou

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding Isdoyux H Depfx Ag Uoau "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue Isdpfxoyu Rllo Ag Usau