Sandblasting unit

Gietart

Condition: used, Gietart Roller conveyor shotblasting machine Type: Roller conveyor Max. width of workpiece: 1500 mm Kledpfxsidlq Sj Abvjp Max. height of workpiece: 550 mm Max. workpiece weight: 600-800 kg/m

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 184 3500 2E Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 184cm Side wall height: 30cm Loading platform height: 68cm Gross vehicle weight: 3500kg Payload: 2746kg Braked tandem axle trailer Overrun and hand brake by AL-KO Kjdpfxjghpc Ne Abvjlp Largest possible axle and brake configuration Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks All sides foldable and removable 15mm thick, slip-resistant and robust phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel, 400kg support load 8 noise-reducing lashing rings with 800kg pulling force Reinforced 13" C-type tires with steel valve M+S tires Mesh/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, rear fog light, and triangular reflectors Upper frame mounted on rubber buffers Large rear tipping angle of 51 degrees Electric tipping operation with plug for charging the 12V battery OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with carrier - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (black powder-coated side walls and rims) - Integrated loading ramps 2800kg - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump - Safety support for maintenance work when tipped - Folding crank rear supports - Complete LED lighting - Anti-theft device - Mesh cover (fine or coarse) - H-frame - Mesh grid in various heights, also fully enclosed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus delivery to Gera and vehicle registration document €250 net Images are example views and may include optional equipment offered at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist in axle repair, also for caravans. We also offer a wide range of spare parts and accessories for trailers from various manufacturers. You’ll also find a wide array of rental trailers available. Visit us online or stop by in person!

Condition: used, Year of construction: 2010, machine/vehicle number: 0901-260005, Kaltenbach Gietart Sprint 1504 continuous blast system with 4 blast turbines. Klsdpfxjymy Hij Abvep Technical data Kaltenbach Gietart Sprint 1504 Number of turbines: 4 pcs. type C 380 Turbine output: 11 kW Brush and blow-off unit: 1 piece Sheet thickness min: 6 mm Flat material min: 60 x 80 mm Working speed: 0.8 - 1.5 m/min. Throughput speed: 0.6 - 10 m/min Feed-through opening: 1600 x 650 mm (for sheets up to max. 1510 mm wide) Roller conveyor height 640 mm Power supply: 400 V +/- 5 %, 50 Hz, Control voltage: 24 V DC Total connected load: 84 kW Compressed air supply: 7 bar, dry, oil-free, clean, 20 m³/h The blasting system is suitable for blasting: Profiles: max. 1000 x 300 mm Sheet metal: max. 1510 width Flat bars: min. 60 x 8 mm Transport length: min. 2000 mm Transport weight: max. 1000 kg/m - min. 30 kg/piece Material quality: S 235JR*NEN-EN 10025-2 Structure of the Gietart blasting machine: Machine housing, 10 mm thick Manganese lining, 4 mm thick Manganese wear strips, 8 mm thick Inlet sluice 1400 mm, with rubber curtains Outlet sluice 800 mm, with rubber curtains Collecting hopper with screw conveyor Screw conveyor to the bucket elevator

Year of construction: 2003, condition: used, Various blasting machines are for sale! Roller table blast machine Trough belt shot blast machine Klsdpfx Abs Hq S Devjp Haengebahn blasting machine Rotary table blasting machine Blast cabinet Pressure blasting cabinet .

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) Kodpfx Ajnxh T Rjbvjlp * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used) Kledpfx Aovgbcujbvsp

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available Klodpfjv U Ralex Abvsp EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Klsdpfxovpgq Ns Abvop Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. Klsdpfx Aody Dw Aobvjp These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-way Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 75cm Gross weight: 3500kg Payload: 2702kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum size axle and brake Low chassis height Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls with tension locks Fold-down and removable on all sides 15mm thick, anti-slip and durable phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing eyes with 800kg tensile strength each Reinforced 13'' commercial tyres with steel valves M+S tires Net/roping hooks on the frame 13-pin connector LED position lights at the front Rear lamps with reversing light, fog lamp, and triangular reflector Upper frame mounted on rubber bushings Generous tipping angle of 49 degrees to the rear Side tipping by relocating safety pins Electric tipping operation with charging plug for the 12V battery Electric lateral tipping angle limiter U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h package (shock absorbers) - Spare wheel with bracket - Without sideboards (discounted price) - Black Edition (powder-coated sideboards and rims in black) - Integrated ramps 2800kg - 35cm sideboards - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump to use with electric operation - Safety support for maintenance work with tilted trailer Kodpfxeghpc Ts Abvjlp - Folding crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - Headboard - Leaf mesh in various heights, also closed - 30cm extension sideboards with tension lock - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration documents (Kfz-Brief) €250 net Images are for illustration purposes and may show equipment subject to a surcharge. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate delivery. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Axle repair specialist, including for caravans. We also offer a wide range of spare parts and accessories, also for trailers from different manufacturers. A large selection of rental trailers is available on site. Visit us online or stop by directly!