1/2 JUMBO STORAGE UNIT with 61 drawers

Glass Serwis

Condition: good (used), The compartments are slanted to the right. Support width: 65 mm. For glass height: 2030 mm. Height: approx. 2400 mm. Depth: approx. 3750 mm. Width: approx. 2400 mm. Gsdpfjxq Rkljx Aqisbr Weight: approx. 1900 kg. 2 pieces available. Condition: good, second-hand.

Condition: used, Year of construction: 2010, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 545 VSXE-46 - Year 2010 Max dimensions: 4600 x 3210 mm Min dimensions: 150 x 125 mm Thickness: - Monolithic: 3-8 mm - Laminated (2 + 2) – (8 + 8) Gbodpfx Aqjy E I A Reior + BOTTERO 101 BLC-J – Year 2010 Jumbo Loading table Tilting function

Condition: good (used), Year of construction: 2010, Straight line edging machine - mitering from 0° to 45°, SCHIATTI Type FPS SME 10, Year 2010 Gedpfx Aqswrdfzoisbr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system Gbedpfoymxk Hjx Aqior variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: ready for operation (used), Year of construction: 2016, A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible. Gbedpfx Ajyxq T Seqier

Condition: good (used), Year of construction: 2009, Cutting width: 3700 mm. With glass loading and unloading device. Cutting system: heating and blade. Working height: 950 mm. Total length of the system: 4080 mm. Gedpfsxpnk Hex Aqijbr Table width: 4020 mm. Width across the bridge: 4820 mm. Year of manufacture: 2009 Weight: approx. 6.2 t. Condition: good, second-hand

Condition: good (used), Year of construction: 2007, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, Glass cutting line for split strips - consisting of: Glass Hegla Cutting Table OPTIMAX3323F 6372 2007 00305 Glass Hegla Glass loading Table BBS 3323 7176 2007 00306 Gbedpfx Aqju S R Ileior Glass Hegla Breakout Table LKB 4230 15811 2007 00307 3 racks included , fencing included

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Gbsdpfxox Tq S Do Aqijr

Condition: used, Year of construction: 2012, Second hand MISTRELLO semi-automatic glass storage racks – 22 positions (for Jumbo or 2 x DLF glass sheets), year 2012 Gsdpfx Aoyqycleqisbr

Condition: excellent (used), Year of construction: 2005, operating hours: 8,000 h, functionality: fully functional, travel distance X-axis: 4,120 mm, travel distance Y-axis: 2,310 mm, For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced. The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet. Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled. Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry. Technical specifications: 1. Working area: 4.12 × 2.31 meters 2. Software: ICam 3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs) 4. 3 reference starting points 5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used. The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility. Gbodpfxsymgfle Aqior Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed. A VAT invoice will be issued. The listed price is NET. Possible disassembly date: From 10/02/2026 onward. Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased. Preferred contact method: email.