Goldhofer STZ-H6-57/80A telescopic low-bed trailer for wagon transport

Goldhofer STZ-H6-57/80A Teleskop-Tieflader Waggontransport

Condition: used, total width: 30,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Wagon Transport                                 Approval          Technical 1 Speed:      80 km/h                65 km/h Fifth wheel load:                23,000 kg              26,000 kg Rear axle load:        10,000 kg              11,000 kg Total weight:      83,000 kg              92,000 kg Payload:                  52,500 kg              61,500 kg Tare weight: (without accessories):          30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: angled 10 degrees Front corners: angled 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical drop-side supports and hydraulic lowering cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Hjdsyfvf Sopfx Abujw Type: Platform Liftable: no Length: 13,000 mm Width: 3,000 mm Decking: Sheet metal/Spruce 50 mm Wheel recesses: no Extensions: no Extendable: single telescopic Length1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Telescopic loading platform, designed as an outer and inner tube structure, with a 1,070 mm long, fixed loading platform section at the front. Integrated bolt-on coupling in the fixed loading platform section for connecting tank bridge extension beams; the welded track rails serve as a rail track in the track gauges of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by means of spring accumulators and conical bushings Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear axle: Axle design: Standard Loading height, loaded: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Decking: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Axles: Number of axles: 6 Lift axle: see accessories Axle type: Steered stub axles Axle equalization: hydraulic Axle manufacturer: BPW/Eco Operating positions: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raising/lowering valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steered axles: 6 Steered axle arrangement: all steered Maximum steering angle: 45° Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: According to EU standard: Yes ABS: Yes ALB: Yes EBS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers, see accessories below) Control elements protected on the left in the direction of travel...

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Hedpfxjhyc Nwj Abuow Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Hodpeifkldjfx Abujw Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Damages: none Hedoymrb Sspfx Abuow YAFTL2007F0017329 = More information = Year of construction: 2015 Empty weight: 13.600 kg Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Hjdpofn Tvisfx Abuew Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder Hsdpjwgakvsfx Abuow - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: King-Pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg GVW: 134,000 kg Empty weight: 33,750 kg Loading capacity: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7-axle steering (Axle 2 rigid) First two axles liftable Drum brakes Brake SN 3020 for ABS, with sensors Tires: 245 / 70 R17.5 Double fitted Load index 143/141J Measurements: Length: 17,700 mm Extensions: 19,500 mm Max extended length: 37,900 mm Loading floor width: 3,990 / 3,450 mm Loading floor height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information: NATO plug Hedeuu E Tispfx Abusw Hydraulic foldable ramps Outriggers + planks for widening loading floor Electro-hydraulic pump for trailer functions Spare wheel + holder Working lamps Rear bumper with lights King-pin 2.0” Central lubrication Lashing rings Wooden loading floor Marker boards for oversize load Remote control = Further information = General information: Year of construction: 2024 Design year: 2024 Axle configuration: Tire size: 245/70 R17.5 Double Fitted (143/141J) Axle brand: BPW ECO PLUS Brakes: Drum brakes Suspension: Hydraulic suspension Rear axle 1: Double tires; Lift axle; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 2: Double tires; Lift axle; Max. axle load: 12,000 kg; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 3: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 4: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 5: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 6: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 7: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Rear axle 8: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inside: 100%; Tire tread depth left outside: 100%; Tire tread depth right inside: 100%; Tire tread depth right outside: 100% Weights: Empty weight: 33,750 kg Payload: 100,250 kg GVW: 134,000 kg Functional: Loading floor height: 105 cm Extendable superstructure: Yes Condition: Overall condition: very good Technical condition: very good Optical condition: very good Financial information: Price: On request

Condition: new, functionality: fully functional, empty load weight: 28,000 kg, maximum load weight: 200,000 kg, tire size: 235/70 17.5, Year of construction: 2026, chassis model: Lider Heavy-Duty Chassis, Equipment: ABS, Heavy-Duty Lowbed Semi-Trailer. Lider Trailer for Heavy-Duty Trailers. High Quality and Durability Manufacturing. EU Standards. EBS or Double Line Brake Systems. One-year Warranty for Manufacturing Defects. 2026 Production Hodpfxjrcb Eaj Abuow Customer Requested Colour.

Condition: used, Year of construction: 1990, -1- used drive roller/deflection roller, drum length approx. 750 mm, drum diameter approx. 400 mm, with 20 kW Stiebel (5042.04.00301.05) gearbox, year not known to us. Price EXW Hedpfx Abswqfzhsuew

Condition: used, mileage: 99,770 km, power: 471 kW (640.38 HP), first registration: 10/2020, fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 11/2026, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Ceramic clutch at WSK, electric glass sunroof, electrically heated/adjustable mirrors, control module at the top of the sleeper cab, Net-Black decorative trim on the dashboard, electric sunblind, smoker's package, reversing warning system, cornering light, 4 work lights, LED daytime running lights, 2 rotating beacons, MAN sound system, video function with USB/SD interface, SD navigation system for Europe, DAB+, AUX/USB, Rio box, MAN Smart Link, preparation for rear-view camera, Rockinger 56 EU trailer coupling mounted at the bottom, JOST JSK 38 C 3.5" loose fifth wheel coupling, 3-stage hydraulic system for heavy transport, additional hydraulic connections at the end of the frame and on the front crossmember for heavy transport. Hjdpfxolxw Auo Abuew