All terrain crane

Grove GMK3055 Diesel, 6x6x6, 55t Capacity, 43m Main Boom

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Codsvl Dl Aopfx Aa Negp Functional Lifting capacity: 8.000 kg Identification Serial number: Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 962,877 km, lifting height: 20,000 mm, Year of construction: 2007, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 25.460 kg Functional Lifting capacity: 14.800 kg Identification Serial number: 970090 / 5127349 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Goodyear Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Additional information Please contact PFEIFER GROUP for more information Codpfexwim Eox Aa Nogp

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. Cjdpfx Ajxcgy Hea Njgp The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: good (used), functionality: fully functional, Year of construction: 1995, load capacity: 70,000 kg, machine/vehicle number: 65068, Equipment: cabin, crane, low noise, Product Description Used truck mounted Terrian crane Manufactured by Tadano faun Model ATF70-4 Crane has a maximum Loading capacity of 70 ton Machine sold as its condition Operates on Diesel Engine More information Please contact VIJAY Codoul Uvuepfx Aa Njgp JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: used, Year of construction: 2025, operating hours: 1 h, General information Field of application: Construction Serial number: 51508182 Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Cgodpfxsxbxpde Aa Njp Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar Cjdsfn Tvhepfx Aa Nogp ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment Cgedpfx Aew T Sc Aja Nop • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), mileage: 186,419 km, fuel type: diesel, color: red, first registration: 03/2007, mast type: telescopic, Year of construction: 2007, Technical Information Number of cylinders: 6 Engine displacement: 9,186 cc Drive: Wheel Dimensions Dimensions (L x W): 1,345 x 260 cm Weights Unladen weight: 35,750 kg Payload: 250 kg Gross vehicle weight: 36,000 kg Functional Superstructure brand: SPIERINGS SK377-AT3 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SPIERINGS SK377-AT3 TOWER CRANE CHASSIS: EURO 4 DRIVE 6X4 MANUAL TRANSMISSION 186,419 KILOMETERS 85 KM/H 3 AXLES IN TOTAL DAF ENGINE 360 HP 365 KW TYRES: 445/75 R 22.5 CAMERA CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE: OPERATING HOURS 15,000 MAX. LIFTING CAPACITY 7,500 KG AT 10.4 METERS MAX. LIFT AT 33 METERS: 1,900 KG HORIZONTAL WORKING HEIGHT: 19.8 METERS MAX. WORKING HEIGHT: 36 M (30°) TOWER HEIGHT: 22 METERS 4 OUTRIGGER PADS CAMERA ON THE MAST CENTRAL LUBRICATION SYSTEM RADIO REMOTE CONTROL FULL BALLAST ALL AVAILABLE BOOKS, DOCUMENTS AND CERTIFICATES DUTCH CRANE IMMEDIATELY AVAILABLE. FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL Cjdpfxouxulwe Aa Negp

Condition: used, Year of construction: 2021, front tire size: 600/65R30, rear tire size: 710/75R42, Equipment: compressed air brake, ISOBUS LED lighting Cooling box terminal RTK LED lighting Tires / 710/75R42 rear / Cgedpfx Aer Ty Ntja Nop

Condition: new, The SBS 255, part of the Horizontal Mitre Cutting Bandsaws category and the Semi-Auto Bandsaw group, is a compact, robust machine designed for efficient machining of small batches. This universal workshop band saw features a one-piece cast-iron saw frame that is torsion-proof and swivels 60° to the right and 45° to the left, allowing for versatile cutting options. With a rigid vise equipped with lateral slide and long guideways in the movable jaw segments, users can achieve precise cuts on various workpiece sizes, thanks to the combination of carbide jaws and adjustable ball bearing guides. The SBS 255 operates quietly, ensuring short machining times and easy handling, which leads to increased productivity. Additionally, it is powered by a strong motor for continuous operation and comes with a high-capacity coolant system. Included with the saw are essential tools like a saw blade, base, pressure gauge, and operator instructions. KNUTH provides the quality assurance you expect, so order online today to enhance your workshop with the SBS 255 Horizontal Mitre Cutting Bandsaw. Cjdpfx Asuyiqdsa Negp