17,300 liter mixing tank made of V2A with 27 kW beam agitator (explosion-proof)

Hagemann 7081

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Ibodpju Thhrefx Ah Usf Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h Ibedpfxol I R T Ne Ah Uef H - Max 34,7 m O/m- 2940 Nice condition 3 pieces identical

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW Ibsdpfxsugf Dwe Ah Uof - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Ibedpfx Ashcfzkjh Uef Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Isdpfx Ahohclffo Ujbf Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Manufacturer: Maurer Type: Smoke chamber for 2 trolley Electric heating 48 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Without an after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 250 Height: 250 Ibjdpfx Ahotulp Se Uof Trolley dimensions in cm: 100 x 100 x 200

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Ijdpfxsibwaro Ah Ujbf Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit !

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Ibedpfx Ash S Nz Soh Usf Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Drive power: Siemens 22 kW Speed: 2950 rpm Iedpfxsd Sybpo Ah Ujbf ! Price per unit !

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm Ibjdpjxpqm Refx Ah Uof C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening