Chipper

Söderhamn Eriksson 670-56

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer Bledpfxoxv Dkcj Aa Ned - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: good (used), We offer 3 used underride silos, with ladder, blow-in pipe. Blodpfx Aaetiy Dnj Njd 60 tons.

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Blsdpfxjq Dzkue Aa Nod Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Bjdpoihpn Nefx Aa Nold Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm Bledevpaa Rspfx Aa Ned threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: ready for operation (used), For turning plates, slices or trays up to 250 mm Ø Bodpferh Hntox Aa Neld Machine with vacuum clamping

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green Blodpfx Aeq Iivaea Nsd - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Blsdpfecqvhwsx Aa Ned Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Bledex Rn Udopfx Aa Ned Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Complete hydraulics/control cabinets

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Blodpjtk N Dkjfx Aa Njd