Inverter system HEIDENHAIN UVR 120D

Heidenhain UVR 120D

Condition: ready for operation (used), Heidenhain UVR 120D ID 390 188-01 SN: 14057083B - including test report, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Njdpjz Syzzefx Abuswn Note: In the exchange process, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €1,000 including VAT will be applied. Attention: You are bidding on a Heidenhain UVR 120D inverter, ID 390 188-01, SN: 14057083B, offered as an exchange service. It has been professionally and completely overhauled and tested, and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1,000 including VAT will be issued.

Condition: excellent (used), Year of construction: 2007, Manufacturer: DECKEL MAHO Nodpfxsz An S Ro Abuswn Model: DMU 50 Year of manufacture: 2007 Machine type: Vertical machining center Application area: Milling Location: Germany Condition: As is, where is Control system: Heidenhain ITNC 530 Number of axes: 5 Travel of X-axis: 500 mm Travel of Y-axis: 450 mm Travel of Z-axis: 400 mm Main spindle speed: 10,000 rpm Spindle speed range: 20 – 10,000 rpm (variable) Tool changer: Chain magazine with double gripper Tool magazine capacity: 30 tool positions Max. tool diameter: 80 – 130 mm (depending on speed) Max. tool length: 290 mm Max. tool weight: 6 kg Table type: Digital swivel-rotary table Table dimensions: Ø 630 mm x 500 mm Max. table load: 200 kg Swivel range of the table: -5° to +110° (total 115°) Drive power: 9 kW (100 %) / 13 kW (40 % duty cycle) Torque: 82 Nm (40 % duty cycle) Measuring system: Direct linear measuring system Input resolution: 0.01 mm Positioning tolerance: 0.010 mm Rapid traverse: 24 m/min Feed rate: 20 m/min Coolant tank capacity: 80 l Electrical connection / Power consumption: 17 kVA Maximum current: 28 A Fuse / Network protection: 35 A Voltage: 400 V / 230 V / 24 V Frequency: 50 Hz Installation dimensions (L x W x H): 4,860 mm x 4,350 mm x 2,424 mm Transport dimensions (L x W x H): 2,210 mm x 2,120 mm x 2,150 mm Transport weight: 4,050 kg Manufacturer: DECKEL MAHO — Model: DMU 50 (2007). Machine type: Vertical machining center for milling applications. Condition: As is, where is. Control system: Heidenhain ITNC 530. Number of axes: 5. Axis travels and table: X = 500 mm, Y = 450 mm, Z = 400 mm. The machine is equipped with a digital swivel table (Ø630 mm x 500 mm) with a maximum table load of 200 kg and a swivel range of -5° to +110° (total 115°). Spindle and tools: Main spindle speed up to 10,000 rpm with a variable speed range of 20–10,000 rpm. Tool changer: Chain magazine with double gripper; tool magazine capacity 30 positions. Max. tool diameter depending on speed (80–130 mm), max. tool length 290 mm, max. tool weight 6 kg. Drive and accuracy: Drive power 9 kW (100%) and 13 kW (40% duty cycle), torque 82 Nm (40% duty cycle). Measuring system: direct linear measuring system. Input resolution 0.01 mm and positioning tolerance 0.010 mm. Feed and auxiliary systems: Rapid traverse 24 m/min and feed rate 20 m/min. Coolant tank capacity 80 L. Electrical and transport: Electrical connection / power consumption 17 kVA; Maximum current 28 A; Fuse/protection 35 A; Voltages 400 V / 230 V / 24 V at 50 Hz. Installation dimensions: 4,860 mm x 4,350 mm x 2,424 mm. Transport dimensions: 2,210 mm x 2,120 mm x 2,150 mm. Transport weight: 4,050 kg.

Condition: ready for operation (used), Heidenhain UVR 120D inverter, ID: 390 188-01, serial number: 14057083B – complete with test report, professionally refurbished and tested, with a 3-month warranty. In good condition, 100% functional. Scope of delivery as shown in the photos. Njdpfx Aoz Syzuebuown

Condition: ready for operation (used), Heidenhain UVR 120D ID 1095625-01 The costs listed refer solely to the repair analysis of your component, which you can send to us. After inspection, you will receive a detailed quotation specifying the actual repair costs. Once we receive your approval to proceed with the repair, the analysis fee will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Nwodpfx Aey Nrp Aebusn

Condition: used, Modular milling cutter Module 8 20 degrees Nwedpfedklt Nex Abuon Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Condition: ready for operation (used), Heidenhain UVR 120D ID 390188-01 The cost only covers the repair analysis of your component, which you can send to us. After we inspect your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis fee will be waived. Your component will be overhauled during the repair process and comes with a 3-month warranty from us. Nwodpfx Aoy Nrp Nobujn

Condition: ready for operation (used), Heidenhain UVR 120D ID 390188-51 The costs only cover the repair analysis of your component, which you can send to us. After evaluation of your part, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be completely overhauled during the repair process and comes with a 3-month warranty from us. Nwedsy Nrqaspfx Abujn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale: a DMU 50 3rd generation. The machine was on display in the DMG showroom from 2019 to October 2021. The following features are included: CELOS with Siemens 840D sl Operate Tool magazine with 30 positions, HSK-A63 Direct path measuring system IKZ/chip conveyor package, IKZ 40 bar, 600 liter belt filter system Coolant/air blow-off switchover Work area flushing Double-layer filter, 25 µm Nwjdpo Aaz Nnefx Abujn Rotating viewing window Spindle speed: 20,000 rpm Flushing gun for chip removal Oil and emulsion separator Measuring probe, infrared TS649 Laser tool measurement 3D Quick SET MPC Machine Protection Control Signal light, 4-color Cooling unit for control cabinet DXF Reader Operating mode 4 Electronic handwheel DMG Mori Netservice IoT Connector Service Agent (Celeos) Messenger (Celos)

Condition: ready for operation (used), Heidenhain UVR 120D ID 728252-01 The costs only include the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. Once you approve the repair, the analysis costs will be waived. Your component will be completely overhauled during the repair and will come with a 3-month warranty provided by us. Nsdpfx Asy Nrqgjbuswn

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm Nwsdow Dud Sspfx Abuen z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 *