Used veneer splicing machines for sale (33)

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Hfslhox Upgcscdw Eoc

Condition: used, Storage location: Supplier Helhcjx Upflodw Eofc

Condition: used, Throat depth: 420 mm Feed rate: approx. 6 m/min Hfjlhcdowrfbdew Esc Kuper veneer splicing machine, type FW/Mini, for precise gluing and joining of veneer sheets with glue thread. Ideal for smaller workshops or flexible use in the production of high-quality veneered surfaces. Includes batch of glue threads.

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Hfolhcdoxgqmxsw Esc Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2004, This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Additional equipment • Light barrier safety device • Safety-oriented electric control • Swing-up protective gratings • Guide light as cut indicator • Telescreen positioning control • Fast table drive with swinging and drawing motion of knives • Simultaneous cuts of top and bottom knife • Automatic course of table, pressure bar, and knife movement • Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves Machine Benefits Technical Machine Benefits • Cutting length: 2810 mm Hslhcdwsyap Sno Eefc • Insertion height: 80 mm • Cutting range: 20 - 470 mm • Drawing motion of knives: approximately 20° • Operating voltage: 400 v • Frequency: 50 cycles Extra Information Supplied with operating instructions Complete and ready for connection

Condition: good (used), Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - CE Standard Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Hslhcdwoyg N Eno Eefc Weight kg 200

Condition: good (used), Code: 0599 Brand: KUPER Model: FW 1200 Hfslhceyg N Dwodw Eec Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Hslhcoyayumedw Eefc Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95 Hfoljxtat Ujhcdw Eoc

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Hjlhcdeg Nn E Nsw Esfc Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Hfelhcevwfaxjdw Esc

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model Hfjlhcsvwf Dwedw Ejc required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: used, Machine cleaned, function tested, Helev Hhtyjhcdw Eefc overhauled, adjusted, test run Various parts replaced: cover – discharge roller – pressure gauge – belt drive used, good condition Make: Kuper Type: FWJ 900 Mach. No. 17063317 Projection 900 mm Air heating mobile Space required approx. 1300 mm x 600 mm x 1400 mm Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Type: FW 100 Machine No: 0371 Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Drive: brake motor 0.55 kW Holhsvk U Thecdw Eefc 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Hslhox Nrmbocdw Esfc Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: good (used), Column projection 910 mm Hfelhcdoqwzfiew Ejc Feed approx. 15 m/min. constant Drive motor 0.18 kW Total connected load 0.45 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English 13.2.7.

Condition: used, functionality: fully functional, Arm reach: 630 mm Veneer thickness: 0.4 - 2 mm Feed speed: 7 m/min Voltage: 220 V, single-phase Overall dimensions: 950 x 500 x 1180 mm (H) Weight: 95 kg Hfelhjx U Tggscdw Esc

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Hfjlhcdsumrgasw Ejc Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: excellent (used), Veneer splicing machine Hfjlhcdstq Ey Tow Esc Model : KUPER FWJ 920 In very good condition.

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) Hjlhjxdxktscdw Ejfc only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Key features: * Durable PUR coating * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 Hfelhcjxdxh Ejdw Ejc 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Hfolhcexdxcpjdw Esc Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 Hfslhcdjxdxccow Eec 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Hfjlhjxd Apmocdw Ejc Technical specifications: - Veneer strips must not show extreme tension or waviness. - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used Holow Id S Sehcdw Eefc For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location