Bale press

HSM V press 1160 plus , v press 1160 max

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available Csdpfx Aeiyx Uzsbuopu

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Cpedpfjw Nhavjx Abusu Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Cjdpfxshclffo Abuspu Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders Cpsdpfsbxu Dhex Abusu From stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net Cpjdeb Nulhjpfx Abusu --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: good (used), Year of construction: 2009, functionality: fully functional, Weight 4950 kg, total weight 12000 kg 5.5 kW Codpfx Abjwpmckeujpu

Condition: refurbished (used), Year of construction: 2021, Brother GTX PRO DTG Printer Year 2021 Very good condition used machine, checked by professional Print: Approximately 100 000 Support table included Printer overhauled, cleaned and tested Included : Ink around 40% (2+) Cleaning liquid full. Included with the used Brother GTX PRO Bulk : 5L Premium Dark Cotton Pre-Treatment, SK Color Dark Cotton; 1L of Premium Light Cotton Pre-Treatment, LIGHT Cotton by SK Color; 1L cleaning fluid for Brother GTX and GTX Pro CXS from SK Color; 100 DTF A3 sheets; Codpek Rkpnjfx Abuepu 1 Kg of Premium DTF powder. Shipping not included We have various GTX Pro Bulk to sell and prices varies depending on print counts : Less than 40K prints : 13500€ between 40K et 60K prints : 12000€ between 60K et 80K prints : 11000€ between 80K et 100K prints : 10250€ More than 100K prints : 9500€

Condition: good (used), Year of construction: 2008, Total Weight: 3500 kg Cpjdpshqd Sisfx Abuou Trailers weight: 866 kg trailer type: Three axle Trailer alomost not useed. It was used just several times for small deliveryeis..

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Cjdpfx Abefhb Tkouopu

Condition: good (used), Offered is a used double toggle jaw crusher from Krupp. Good condition, fully operational. 500 x 300 mm, 15 kW, new tools. The motor is currently being overhauled. Cpedpfxewy U Ico Abuou