Imer Betomatik 508

Imer BTK 508

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Nedpfx Aexnnd Reaceku Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Nsdpfxoflz Hde Aacoku Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel Nsdpfofg Eu Ujx Aacsku • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch

Condition: good (used), We offer 3 used underride silos, Nedpjtiy Dnofx Aacjku with ladder, blow-in pipe. 60 tons.

Year of construction: 2018, condition: new, Permanent overband magnetic separator TYPE PEM2200 Nsdpfed Dy S Dox Aacoku 2200 x 1000 x 400mm ===== 4x eyebolt for suspension Rubber band GB30 Magnetic dimensions: 1200x500mm

Condition: used, Year of construction: 1993, Häwa debarking milling machine H249 / 1000 Nksdpfx Aox Rv T Isacju Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Nkjdpjgwqk Ssfx Aacou Conveyors system between the machines included.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. Nsdpfx Aaow Nyt Iecoku A concrete shaft is also included. The machine is fully operational and can be inspected during operation.

Condition: used, mileage: 48,677 km, power: 130 kW (176.75 HP), first registration: 01/2011, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Equipment: ABS, crane, electronic stability program (ESP), parking heater, Nissan Cabster 35.13 PALFINGER Steiger 26 meters 4x2 Suspension: spring / leaf Wheelbase: 2.95 m PALFINGER Steiger Type: P 260 B Year of manufacture 2011 4x hydraulic extension 4x hydraulic support points 1x work basket (1.40 m x 0.70 m x 1.10 m) Nkodpfxspvli Ss Aacsu Equipment: - Electric window lifter - Auxiliary heating We are also happy to support you in the area of financing/leasing with our partners. All information is provided without guarantee. Errors and intermediate trade reserved.

Condition: excellent (used), fuel type: electric, color: green, Year of construction: 2015, operating hours: 25,987 h, Year of manufacture: 2015 Empty weight: 30.000 kg Mast length: 13 m Technical condition: very good Visual appearance: very good Price: On request Serial number: 825.7.2315 Please contact Ferdinand Pater for more information Stock no. D19 Machine Nodpfxjt Dlv Nj Aacsku Brand Sennebogen Type: 825AE-D-series Weight: 30 Ton Serial number: 825.7.2315 Building year: 2015 Worked hours: 25.982 Engine: Electro engine 400V 110kW Boom: K13 Boom configuration, boom 7.5 meter, stick 5.8 meter Cabin: "Maxcab industrie, Hydraulic Cab Riser, 2,7 m. in height gantry catwalk on cabin, extra window 320x270mm in cabin floor " Upper carriage: Standard Sennebogen color, Central greasing system, Hydro-clean filter Undercarriage: Sennebogen ST20, 400x400 including 2x 5 tons extra counterweight, 1 meter extra pilon. Lights: Several (LED) lights on boom, stick and cabin Extra: Machine has a brand new origional Sennebogen slewing ring, is serviced and clean, ready for work